XW-G1
107 files
-
XW-G1 45 Performance Sound Sets
By XW-Addict
Sounds created to record and play with the Looper, They are also new sounds for the G1.
This will get gradually filled up with more Performance sounds I've intentionally created to record
loops with the looper but as I've later discovered the standard step sequence are great joy also
for these patches. Hope you'll like some of them and be free to edit and make you're own from these.
4,703 downloads
-
Groovy Sample Loops Part 2
By XW-Addict
Groovy Loops Part 2.
Based on Performance patches and Step sequence.
Package for this going to be called Run_The_Looper
Some of these loops where build with one Performance patch,
Others with stacking another on top.
Some drum patterns have been realized by creating two patterns
and stacking them on top of each other which was one way to do it
but I've also could program a full step sequence using Bass , sol 1 2 for drums
Have fun if you have any idea's shoot me a few.
*added 8 more loops which are some of my experimental kind of stuff.
Package available soon.
1,096 downloads
- Groovy Loop
- Sample Loops
- (and 6 more)
(1 review)0 comments
Updated
-
XW-G1 - Sweet Dreams (are made of this)
By Brad Saucier
This was something I originally did on the PX-5s. I have heard some people use the XW's for this song. I decided to give it a go myself.
This is a step sequence and performance file along with custom melody tones for playing this song.
Demo on my soundcloud page....https://soundcloud.com/bradmz/casio-xw-g1-sweet-dreams-are-made-of-this
SweetDreams.ZPF - The performance file that brings everything below together.
SweetDreams.zip - Uncompresses as the ZSS step sequnce file used in the performance file above. Place in U:1-6
SweetLead.ZTN - Tone used in the performance zones 1 and 2. Place in U:107.
SawSweet.ZTN - Tone used in the step sequence parts 10 and 11. Place in U:106
SquareSweet.ZTN - Tone used in the step sequence parts 12 and 13. Place in U:105
Bender wheel is disabled for the lead sounds. Pitch bend is tuning the tom drum hit in the step sequence by way of the sequencer control track.
976 downloads
(1 review)0 comments
Updated
-
Groovy Loops G1
By XW-Addict
Groovy loops from patches its a mix of these patches and tones combined sampled together as a loop to groove on.
Added an additional 10 loops to jam with.
844 downloads
-
Backup factory installed user wave data for the XW-G1
By Brad Saucier
Here is all of the original user wave data factory installed on the XW-G1. This is here for anyone who lost the original data.
548 downloads
-
Reverse Sample Loops Using SampleLooper
By XW-Addict
This is having fun with the G1 reverse feature with the sampling it opens up a whole new sonic great for ambience , intro etc.
here are some of my examples.
374 downloads
-
CityBrass1 and CitybrassXL
By XW-Addict
I love brasses they give such a full range of harmonic color I had to try it out I was thinking. Count bassie, Don Ray , Duke ellington, Grover Washington Jr. So here it is a sort of brass-hit, Softbrass I've eq't for a softer edge,CitybrassXl is louder ive added delay effect I've discoverd that you can create an effect specific within performance mode patch you create that cool.
So it is more like a brass hit you can alter each instruments ,octave shift ,transpose and effect to change how it sounds.
Enjoy.
I've edited them again today new upload deleted the other changed the step sequence same stuff different beat added a third.
360 downloads
-
(1 review)
0 comments
Submitted
-
G1 Drawbar Pack
By BrettM
After experimenting with the nona-layer method I posted in the G1 area a while back, I now realise there is an easier way to create a complete drawbar organ on the G1: save the nine basic drawbar tones as splits across two user waves. Each split corresponds to one drawbar. Then all you have to do is edit the volume of each split to create the desired registration. Don't forget to change the volumes in increments of 16 if you want true drawbar authenticity, although finer adjustments are possible. The splits are constructed as follows:
File/Split Note played Drawbar
DBL88888 Split 1 C3 16'
DBL88888 Split 2 G4 5 1/3'
DBL88888 Split 3 C4 8'
DBL88888 Split 4 C5 4'
DBL88888 Split 5 G5 2 2/3'
DBH8888 Split 1 C6 2'
DBH8888 Split 2 E6 1 3/5'
DBH8888 Split 3 G6 1 1/3'
DBH8888 Split 4 C7 1'
Also included in the pack is a performance which ties it all together, including the 2nd and 3rd percussion in zones 3 and 4. Knob 1 adjusts the volume of zone 3 and thus switches 2nd percussion on or off and increases it's volume in the mix. Ditto for knob 2 and 3rd percussion. Knob 3 controls the overdrive gain of the rotary speaker and knob 4 controls its speed.
It uses up two user waves, but this is a small price to pay for a fully functional drawbar organ. Save the files to a card until needed.
The main limitation of this set up is that it chews up the polyphony pretty fast because we're mixing the drawbar sound in real time. One note on the keyboard activates 11 tones. A triad uses 33! If this causes a problem, just record a single note, say C4, in the sampler and you're back in business. This is also a good way to store specific registrations that you may want to reuse. Enjoy!
=== Version 2.0 ===
I noticed some distortion when playing triads in version 1.0 of the organ, which I put down to exceeding the polyphony, but now realise that it was just straight out clipping. So version 2.0 has the same files with the volumes of each split reduced from 127 to 80. This should eliminate any distortion and also makes it easier to create standard registrations using stop increments of 10 rather than 16, you may have to turn up the volume a bit more however. When some of the drawbars (splits) are "pushed in" (turned down), it may be possible to increase the volumes of the others without experiencing clipping.
=== Version 3.0 ===
I have since realised that the pitch shifter can shift up two octaves, but can shift down many more, so I've raised everything by an octave. Thus all the notes in the table above are an octave higher. This allows the organ to play from C7 down which makes it much more playable. Previously the notes repeated after C6. I've also improved the looping in the splits.
320 downloads
(0 reviews)0 comments
Updated
-
djerazore
By djerazore
The "suite" mean in French ...... here is an other leads selection tell me if you like I love to program and design synth sounds
304 downloads
- vintage leads
- dance
- (and 2 more)
-
(0 reviews)
0 comments
Submitted
-
(0 reviews)
0 comments
Submitted
-
DAYMOTION SET
By XW-Addict
A work in progress plus don't forget to set the step sequence pattern correctly in performance patch.
Daymotion is an music project to gather lots of all what in the G1 and create a sonic musical event.
Ive used the arpeggio on the left hand and recorded a phrase on the right but there are lots of possibility's
Enjoy.
259 downloads
- ELECTRONIC
- HOUSE
- (and 1 more)
(0 reviews)0 comments
Submitted
-
Sitar Groove
By XW-Addict
Install to a Free User Slot.
Don't forget if needed to let the Performance know where Arpeggio, Step sequence and DSP.
This can be done in edit mode sequencing etc same also for the sample loop.
Set the Bpm to 138 this is to sync with the sample loop.
Zipped the step-sequence and DSP for reasons known.
I've set the knobs to Cutoff , Attack , Release, Decay
My settings are:
Due to my peculiar sound design skills you may need to
transpose the keyboard to -03 Holding Transpose and press minus button.
Cutoff 110
Attack 50
Release 110
Decay 50
One more interesting performance thing if you've set it up right press Hold Arpeggio,
Select with the Minus step button this will change the which sync type you want during
performance this can be handy to set up front.
I've set it up on S/Sq so that when I hold a key the Arpeggio and step sequence play at once
and when the key is released it stop playing by switching arp on and off during performance play
its awesome. Plus by switching the sync to on only it switches the S/seq off leaving room to turn on
the sample looper and have a go with the pre-recorded performance to play along with.
Enjoy.
255 downloads
-
TheCarsLetsGo Solo Lead Synth (XW-G1)
By Brad Saucier
NOTE: This works only on the XW-G1. Download the MP3 demo to get an idea of what it is supposed to sound like.
A quick attempt to get the famous sound heard in the song by The Cars Let's Go.
254 downloads
-
909 & Linn Drum Samples (XW-G1)
By Brad Saucier
2 sets of popular classic drum sound waves for the XW-G1. Kick, snare, closed hat, open hat, clap in each one
237 downloads
(1 review)0 comments
Updated
-
Djerazore Great gift PACK. August 2014
By djerazore
To make this file compatible with all systems I compressed with zipper integrated windows
other things since I create sounds for this model of Casio XW-G1 nobody ever thank me in terms of number of downloads today.
I put my work files and some others graciously free download and no one says thank you, while I when I downloaded a file I always thank ... it is always nice
226 downloads
-
(0 reviews)
0 comments
Submitted
-
Infinite Motive Set
By XW-Addict
Some grooves to play with build with G1. Bpm either 125 or 135.
217 downloads
(1 review)0 comments
Submitted
-
Sound Addiction Sample Looper Set - WIP
By XW-Addict
Hello I've uploaded a sample looper performance set I've been working on off and on.
I've build sounds what I like or for certain music projects its a work in progress (WIP)
Some of the performances need the knobs to create a sound scape.
Some performances need octave shift or octave transition shift.
Some performances are just not finished some are.
Most performances have no category yet nor or are ordered in that form.
Some performance may sound lame while others have something interesting.
Some step sequence are harsh while others miss a certain kit some are just cool.
I'm always building music in the sampler so you might want to check what I've
left there first be warned I used headphones mostly so it might sound different
on the speaker. Also the kind of music I do is a bit fruity and weird so be warned
Everything is a bit sloppy but I'm one to take the moment of creation and go at it.
This ZAL file will erase most of you're own performances so be sure to backup your own
files first before installing this one.
SampleLOoperRules.
215 downloads
-
Oscillator Shaping - RavingPundit
By XW-Addict
This is an example for using Oscillator Shaping on the XW.
Install it on a free user slot, assign solo-synth to zone 1 and
don't forget to add the custom arpeggio also in a free slot.
Its a rave synth btw :-) very addictive to play with.
RavingPundit.MP3
212 downloads
-
Sweet E.piano
By XW-Addict
Performance mode patch kinda my favorite you can use k1 to k3 knobs for personal preference,
Mine preference Cutoff 45, Release 22, Chorus 45. The main global effect changes the sound color
but I noticed it can add texture which you like from an EP. I also like to have the Hold button with it.
193 downloads
-
TLKBXROBOT
By XW-Addict
Hello there I made a talkbox that sound like a robot just hook up a mic.
Its my first version for a talkbox I had fun doing this I had a Wally and Eve
kinda sound did not save it . Working on the next version enjoy.
189 downloads