XW-G1
107 files
-
MetalDrummer (Step Sequencer)
By Gnomo Alegre
STEP SEQUENCER:
Parts: 8, 9, 10 and 12. Not equalized.
91 downloads
-
RainbowDubStep
By XW-Addict
Choco variant of dubstep. Preferred tempo 130 / 165 / 180
Here is how it sound.
https://soundcloud.com/clay-louis-petty/dubstep-city-dub2stepchoco
75 downloads
0 comments
Submitted
-
LastOrder
By XW-Addict
Progressive Rock kind of thing feel free to improve .
Here how it sounds.
https://soundcloud.com/clay-louis-petty/lastorder-dt
72 downloads
0 comments
Updated
-
0 comments
Submitted
-
CZ Double Sine Organ
By BrettM
A user wave organ based on the CZ Double Sine waves with splits structured like the Quick Organ: http://www.casiomusicforums.com/index.php?/files/file/743-quick-organ/.
Brighter than the usual sine based organ tones, but can be filtered to recreate them if necessary. Also responds better to the resonant filter than standard organs.
90 downloads
0 comments
Submitted
-
Infinite Motive Set
By XW-Addict
Some grooves to play with build with G1. Bpm either 125 or 135.
214 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Quick Organ
By BrettM
While working on version 3.0 of the G1 Drawbar Pak, I started thinking about making an organ that just uses up one user wave slot rather than two. This is it. The problem is: how best to arrange nine sine waves over five splits.I tried a few combinations but this one turned out to be the most useful.
Split 1: 16', 5 1/3' and 8' drawbars fully out
Split 2: 4', 2 2/3' and 2' drawbars fully out
Split 3: 1 2/5' drawbar
Split 4: 1 1/3' drawbar
Split 5: 1' drawbar
I think many of the classic registrations are possible with this arrangement. E.g., the bread and butter tone of 888000000 is produced by just having the volume up on spit 1.Each of the high frequency "brilliance" drawbars has a dedicated split and is thus easy to adjust.
It is also worth remembering that each split has its own filter, which can be useful for generating more options in splits 1 and 2; and is especially useful for tweaking the mid tones in split 2.
I have not tried to implement percussion but it can be fairly easily added by combining this tone with the performance in the G1 Drawbar Pak.
=== Version 2.0 ===
I've tried to improve the looping.
95 downloads
0 comments
Updated
-
G1 Drawbar Pack
By BrettM
After experimenting with the nona-layer method I posted in the G1 area a while back, I now realise there is an easier way to create a complete drawbar organ on the G1: save the nine basic drawbar tones as splits across two user waves. Each split corresponds to one drawbar. Then all you have to do is edit the volume of each split to create the desired registration. Don't forget to change the volumes in increments of 16 if you want true drawbar authenticity, although finer adjustments are possible. The splits are constructed as follows:
File/Split Note played Drawbar
DBL88888 Split 1 C3 16'
DBL88888 Split 2 G4 5 1/3'
DBL88888 Split 3 C4 8'
DBL88888 Split 4 C5 4'
DBL88888 Split 5 G5 2 2/3'
DBH8888 Split 1 C6 2'
DBH8888 Split 2 E6 1 3/5'
DBH8888 Split 3 G6 1 1/3'
DBH8888 Split 4 C7 1'
Also included in the pack is a performance which ties it all together, including the 2nd and 3rd percussion in zones 3 and 4. Knob 1 adjusts the volume of zone 3 and thus switches 2nd percussion on or off and increases it's volume in the mix. Ditto for knob 2 and 3rd percussion. Knob 3 controls the overdrive gain of the rotary speaker and knob 4 controls its speed.
It uses up two user waves, but this is a small price to pay for a fully functional drawbar organ. Save the files to a card until needed.
The main limitation of this set up is that it chews up the polyphony pretty fast because we're mixing the drawbar sound in real time. One note on the keyboard activates 11 tones. A triad uses 33! If this causes a problem, just record a single note, say C4, in the sampler and you're back in business. This is also a good way to store specific registrations that you may want to reuse. Enjoy!
=== Version 2.0 ===
I noticed some distortion when playing triads in version 1.0 of the organ, which I put down to exceeding the polyphony, but now realise that it was just straight out clipping. So version 2.0 has the same files with the volumes of each split reduced from 127 to 80. This should eliminate any distortion and also makes it easier to create standard registrations using stop increments of 10 rather than 16, you may have to turn up the volume a bit more however. When some of the drawbars (splits) are "pushed in" (turned down), it may be possible to increase the volumes of the others without experiencing clipping.
=== Version 3.0 ===
I have since realised that the pitch shifter can shift up two octaves, but can shift down many more, so I've raised everything by an octave. Thus all the notes in the table above are an octave higher. This allows the organ to play from C7 down which makes it much more playable. Previously the notes repeated after C6. I've also improved the looping in the splits.
317 downloads
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
PlukXlady -Synth pluck
By djerazore
One pluck synth you can make variation with filter Knob 1
58 downloads
0 comments
Submitted
-
Djerazore Great gift PACK. August 2014
By djerazore
To make this file compatible with all systems I compressed with zipper integrated windows
other things since I create sounds for this model of Casio XW-G1 nobody ever thank me in terms of number of downloads today.
I put my work files and some others graciously free download and no one says thank you, while I when I downloaded a file I always thank ... it is always nice
226 downloads
-
Queen - Radio Gaga
By XW-Addict
Queen Radio Gaga I made it in a different key its a first version but It would be better on the P1 which has more tones to add my next version will be for the PX5S.
Here a demo from it.
https://soundcloud.com/clay-louis-petty/queens-radio-gaga-patch-demo-xw-g1
151 downloads
0 comments
Updated
-
LifeForm
By XW-Addict
Contains.
DeepSpace zpf //fun patch
LifeForm zpf //Hear demo
SpaceStation zss //four patterns
WaterDrop ztn //which is actually edited SeqeunceSine tone
Its my first clean patch assembly
left side keyboard bass lead sound triggerd with or without arpeggio,
Interesting part is the drop you get with arpeggio by pressing two following
keys at once. I've used that to switch to the next pattern gives a nice effect.
73 downloads
-
Space station
By XW-Addict
Space Station its two files the performance file Deep station and SSeq SpaceStation.
The stepsequence file only contains controller settings so you have to use the panel to
program in a rhythm here somekinda demo thingy ummmm well you play with these files ).
http://www.casiomusicforums.com/index.php?/topic/5986-spacestation-journey-onwards-with-the-starship-xw-g1/
94 downloads
0 comments
Submitted
-
Jazz fusion and all of my work in progress ZSS
By XW-Addict
Jazz Fusion performance patch I fooled around with to program the XW and unfinished unamed duplicated StepSeq I made during the time.
122 downloads
0 comments
Submitted