CGO777

Thanks folks so much for this input! God Bless Carl

Okay - actually - one more question... could I use a volume pedal to control the volume of Zone 1 ? and I if so, how do I do that? Right now I have a foot pedal connected to the pedal 2 input which I use on a completely different stage setting for individual sustain of Zone 2. If I plug a volume pedal in pedal 2 jack, I lose the sustain pedal type of function I assume Is there some kind of pedal assembly I can use that will give me both volume and sustain options on pedal input 2 THANKS, Carl

Thanks so much!

placed the 5s in Zone 1 for Hex Layer and went into Common Edit Accssed Knob 4 and set it to CC7 as directed But this also sets all the other Zones to CC7 I suppose that is the purpose of Common Edit? but I don't see how to access Knob 4 any other way Q: What am I doing wrong?

Ebonivor - thanks, but could use a futher assist.

Hi - my name is Carl Love the 5S Question: I am altering Factory Preset 07 called "Ice Castles" All Zones are "on" ZONE 1 Hex layer that was originally programmed for this patch It has 6 layers mapped to the 6 sliders ZONE 2- is "Piano Pad" ZONE 3 - Grand Piano 00 ZONE 4 - Air Electric Piano QUESTION: I want to assign the overall volume of the hex layer to knob 4 while at the same time being able to retain individual control over the hex layers with the sliders Can I do that? If so, how? THANK YOU!

Thank you! That did it - I have been a performing musician all my life and a conductor, but have done almost nothing with midi, so I don't know simple things like this! Thanks Again, God Bless

Hi Brad - I just installed the firmware update so I am starting over with editing i have altered the patch entitled "illuminated" - # 0-3 I assigned a breathy tenor sax to the top register on Zone 4 - top 2 octaves only Turned off Pedal 1 Damper for Zone 4 Changed the note range for Zones 1-2-3 to be off for top 2 octaves, so the sax will speak alone PROBLEM Pedal 1 now provides Damper for Zones 1-2-3 - great I want Pedal 2 to control separate damper for Sax on Zone 4 When I assign Pedal 2 to CC 64 Hold, and play a note and press Pedal 2, it sustains and will not stop - pedal 2 has no further effect - any note on Zone 4 that i add also sustains indefinitely and will not stop WHY WOULD THIS HAPPEN Can I not have pedal 1 do damper function for Zones 1-2-3 (with Pedal 1 turned off to Zone 4) and at the same time have pedal 2 provide damper function for Zone 4? thanks for your help and God Bless

Thanks Bread - that is really helpful I assigned the filter cutoff to pedal 2, and that works perfectly, allowing me to have the wa on zone 1 BUT DAMPER PEDAL PROLEM REMAINS i went into each of the 4 zones common edit, and made sure Pedal 1 target is "CC64 Hold" - but there is still no sustain on any zone any idea why?

Hi folks - my name is Carl Love my PX5S Problem: I was creating my own stage setting based on factory preset 1-4, which featured Clav with wa effect using pedal 1 Zone 1 - factory set clav with Wa-wa ( changed key range to eliminate top keys ) I added: Zone 2 - Clavi 4 ( changed key range to eliminate top keys ) Zone 3 - Air Piano 1 Zone 4 - Syn Brass 1 - assigned to high keys only with octave lowered during edit i noticed that the Zone 1 pedal setting was having a bad effect on the Zone 3 piano... notes wouldn't speak on the piano, probably affected by the cutoff, but I decided to save anyway. After saving, the wa effect on Zone 1 disappeared. I recreated it When I saved that edit, damper effect disappeared from all zones. I went to common edit and made sure that the pedal 1 was set to CC64 Hold, I went into pedal assignments to each one to be sure pedal 1 is enabled, but to no avail. All other stage settings work fine. Questions 1) how can I get damper pedal (hold) to work again on Stage Setting 1-4? 2) Why did the original wa clav effect go away when I tried to save? 3) Is it possible to have pedal 1 providing cutoff on 1 zone while it is doing normal damper effect on the other zones? Thanks and God Bless Carl