RichF

Privia PX-S3000 Registrations: EP & Clav This is a collection of four PX-S3000 Registrations focused on electric piano and clav sounds, featuring some time-honored amplifier and effect combinations. LOADING INSTRUCTIONS Create a folder titled “MUSICDAT” on a USB flash drive and copy the EP&CLAV.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear. On the PX-S3000: 1. Touch and hold FUNCTION to access the function menu. 2. Use </> to select MEDIA, then touch ENTER. 3. Use </> to select LOAD, then touch ENTER. 4. Use </> to select “Reg Mem Bank”, then touch ENTER. 5. Use </> to select “EP&CLAV”, then touch ENTER. 6. Use </> to select a destination bank, then touch ENTER, 7. Touch + to confirm, then touch EXIT when “Complete” appears on the display. Please refer to page 60 in your User Guide for further details. REGISTRATION DESCRIPTIONS 1: Stage Amp EP Tine- based electric piano with phaser, light tremolo, FD-TWRV2 amp cab model and tempo-synced delay. Rhythm: 16 Beat Bld Knob1: Delay depth Knob2: Phaser rate 2: JC Tines Tine-based electric piano with clean-ish RL-J12 amp model and fast delay. Knob1: Delay depth Knob2: Amp gain 3: Touch Wah EP Tine-based electric piano with touch-responsive FAT wah model. Knob1: Chorus Knob2: Reverb send 4: Touch Wah Clav Clav with touch-responsive CRY wah model and FD-TWRV2 amp cab model. Knob1: Chorus Knob2: Reverb send

Privia PX-S3000 Registrations: Splits This is a collection of four PX-S3000 Registrations that feature split and layered combinations of various Tones, with relevant Rhythms selected. The PX-S3000 allows the pitch bend wheel, arpeggiator, and pedals to be applied to specific layers. These Registrations take advantage of this, allowing expressive and realistic performance when using multiple Tones at once. LOADING INSTRUCTIONS Create a folder titled “MUSICDAT” on a USB flash drive and copy the SPLITS.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear. On the PX-S3000: 1. Touch and hold FUNCTION to access the function menu. 2. Use </> to select MEDIA, then touch ENTER. 3. Use </> to select LOAD, then touch ENTER. 4. Use </> to select “Reg Mem Bank”, then touch ENTER. 5. Use </> to select “SPLITS”, then touch ENTER. 6. Use </> to select a destination bank, then touch ENTER, 7. Touch + to confirm, then touch EXIT when “Complete” appears on the display. Please refer to page 60 in your User Guide for further details. REGISTRATION DESCRIPTIONS 1: Opera Death Scene An orchestra with a solo contrabass in the left hand, and StringsVoice and mandolin layer in the right. The arpeggiator applies strumming gestures to the mandolin. The pitch bend wheel applies to the contrabass but not to the upper layers. Knob 1 adjusts the balance between the StringsVoice and Mandolin layers. Rhythm: March 1 Knob1: Layer balance Knob2: U2 fine tune 2: Dhelicacy Split Tanpura in the left hand, sitar and harmonium in right. Use Knob 1 to balance the sitar and harmonium layer. The pitch wheel affects only the sitar, and the damper pedal sustains only the tanpura. Rhythm: Bhajan Knob1: Layer balance Knob2: U2 fine tune 3: Guangdong Split Wood pad in the left hand, mixable Yang Qin and Pi Pa tremolo layer in the right. Rhythm: Guangdong Knob1: Layer balance Knob2: U2 fine tune 4: Pad+Lead A left-hand pad with right-hand overdriven synth lead. The lead uses delayed vibrato, drive, MS- PLX amp cab model, compressor and delay. The damper applies only to the pad, and the pitch bend applies only to the lead, allowing you to pedal chords and bend the lead with your left hand. The knobs adjust filter cutoff and resonance only for the lead. Rhythm: Rock Anthem Knob1: Cutoff Knob2: Release

Privia PX-S3000 Registrations: Orchestral This is a collection of four PX-S3000 Registrations that combine solo and ensemble orchestral instruments, taking advantage of the PX-S3000's layer and split capabilities and adding ambience with the Hall Simulator. LOADING INSTRUCTIONS Create a folder titled “MUSICDAT” on a USB flash drive and copy the ORCHESTRAL.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear. On the PX-S3000: 1. Touch and hold FUNCTION to access the function menu. 2. Use </> to select MEDIA, then touch ENTER. 3. Use </> to select LOAD, then touch ENTER. 4. Use </> to select “Reg Mem Bank”, then touch ENTER. 5. Use </> to select “ORCHESTRAL”, then touch ENTER. 6. Use </> to select a destination bank, then touch ENTER, 7. Touch + to confirm, then touch EXIT when “Complete” appears on the display. Please refer to page 60 in your User Guide for further details. REGISTRATION DESCRIPTIONS 1: Symphony Orchestra Mixable stereo strings + stereo brass layer with timpani in the lower octaves. The Hall 3 simulator adds ambience Knob1: Layer balance Knob2: U2 fine tune 2: Vibrato Ensemble String ensemble featuring solo violin with natural vibrato. Use Knob 1 to adjust the balance between the ensemble and the solo violin. Knob1: Layer balance Knob2: U2 fine tune 3: Tremolo Strings Strings with delayed tremolo bowing effect. Knob1: Tremolo rate (bowing speed) Knob2: Tremolo depth 4: Orchestra+Piano An orchestra with Brass & String in the left hand, and Mellow strings + Flute/Oboe in right. Use Knob 1 to balance the string and flute/oboe layers. With ACCOMP turned on, playing a chord anywhere on the keyboard triggers a piano pattern. The Stadium Hall Simulator adds ambience. Knob1: Layer balance Knob2: U2 fine tune

Privia PX-S3000 Registrations: Motion Pads This is a collection of four PX-S3000 Registrations that use its built-in arpeggiator and DSP effects to create animated soundscapes. LOADING INSTRUCTIONS Create a folder titled “MUSICDAT” on a USB flash drive and copy the MOTION_PADS.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear. On the PX-S3000: 1. Touch and hold FUNCTION to access the function menu. 2. Use </> to select MEDIA, then touch ENTER. 3. Use </> to select LOAD, then touch ENTER. 4. Use </> to select “Reg Mem Bank”, then touch ENTER. 5. Use </> to select “MOTION_PADS”, then touch ENTER. 6. Use </> to select a destination bank, then touch ENTER, 7. Touch + to confirm, then touch EXIT when “Complete” appears on the display. Please refer to page 60 in your User Guide for further details. REGISTRATION DESCRIPTIONS 1: Pad+Sweep Arp Warm Pad layered with an arpeggiated synth line using LFO wah to create a filter sweep. Rhythm: Electronic Bld Knob1: Wah manual Knob2: Wah speed 2: Pad+Bounce Arp Xenon pad plus a filter-swept arpeggiated VA synth with auto pan effect timed to match arp speed (adjusting tempo from 105 desynchronizes auto pan). Rhythm: 16 Beat Bld Knob1: Attack Knob2: Release 3: Shimmering Drops Pad Synth Voice Pad Pad with a "shimmering" effect created with an arpeggiated phaser EP sound with increased attack. Use Knob 1 to adjust the attack time, modulating the EP between "shimmering" and "droplet" gestures. Rhythm: EP ballad 1 Knob1: Attack Knob2: Release 4: Whales in VR Soft Pad with digital whale song generated by a randomly arpeggiated sine lead with phaser, delay, and pitch modulation. Rhythm: Trance Knob1: Layer balance Knob2: U2 fine tune