Search the Community
Showing results for tags 'Church'.
Found 8 results
-
Version 1.0.0
317 downloads
I haven't used my PX-5S for worship but I got a gig that required it. All the tunes were pretty much just ethereal pads and some piano. So I used Maximillion as a start, as it's a pretty full and thick Hexlayer, removed layers 5 and 6, and added a zone 2 with a Grand Piano. Two sliders govern the volume of zone 1 (hexlayer) and zone 2 (piano). The first four sliders control the volumes of the 4 layers in the hexlayer. Knob 3 is high gain, knob 4 is reverb. I like this setting because I can do JUST pads or JUST piano, fading in the entire hex layer or controlling individual aspects via the sliders. Have fun! -Tom -
Modern Worship View File I haven't used my PX-5S for worship but I got a gig that required it. All the tunes were pretty much just ethereal pads and some piano. So I used Maximillion as a start, as it's a pretty full and thick Hexlayer, removed layers 5 and 6, and added a zone 2 with a Grand Piano. Two sliders govern the volume of zone 1 (hexlayer) and zone 2 (piano). The first four sliders control the volumes of the 4 layers in the hexlayer. Knob 3 is high gain, knob 4 is reverb. I like this setting because I can do JUST pads or JUST piano, fading in the entire hex layer or controlling individual aspects via the sliders. Have fun! -Tom Submitter Tom Georges Submitted 08/08/2020 Category Acoustic Pianos and Piano Layers
-
Version 1.2
726 downloads
This is a 'real church' organ stagesetting. The goal was to create a detailed church organ sound, with not only the full power of the organ, but also the subtleties from blending different stops or retracting them. To get this to work you need to download the stagesetting 'CHURCHORG' I have added the separate hex layers also, eventhough they aren't necessary in order to function. The layers act as different organ stops. You can see the organ stops as different sounds which can be added to each other. Add layers (stops) by pulling down the sliders! The stops in this stagesetting: S1 -- 16' principal S2 -- 8' Flute S3 -- 4' principal -- the above first 3 stops are making a base layer S4 -- 3' mixture S5 -- 3' nazard S6 -- 8' trumpet -- these 3 above give a different blend to the mix K4 -- 8' voix céleste (slightly detuned sound, to create a wavering human voice effect). -- I consider the above stop a solo register, not to be used with all the rest together, which is why it's on knob4. However you can blend the voix céleste nice with the flute or the principals. K1 -- controls the amount of reverb. If you play in a church you wouldn't need reverb (but then again you'd have a real church organ, no?) Example: https://soundcloud.com/pieter-jan-lanssens/realistic-church-organ Stops used here: in the beginning a tutti (everything except voix celeste), then only voix celeste, then flutes. Was a quick record, without any rehearsal, it shows at the end :-). -
Hi, everybody. Can you share your favorite ORGAN setting (tones/drawbars) for hymns ? This is my favorite one :
-
Just wanted to share the stage setting that I usually use when playing at church. 4 zones: Pad, Strings, Piano, E Piano Slider 1: Piano volume Slider 2: Strings volume Slider 3: Pad volume Slider 4: E Piano volume Slider 5: Delay Slider 6: Aux volume The Pad sound is based on the Maximilion stage setting, with some tweaks. I only have it sounding in the lower part of the keyboard (but shifted up an octave). Download can be found here.
-
As you know our keyboards are USB Midi Compliant, that means you can connect them to Midi devices in some case directly tuo USB, otherwise using, for example, the Kenton Midi USB Host http://www.kentonuk.com/products/items/utilities/usb-host.shtml Those Midi app let you to controle via USB OTG, Opus#1 1843 french two manuals church organ based on high-quality recordings http://www.refined-apps.com/opus-1/ be careful the app works only 4 1/2 octaves as the real organ and Pitea a 1989 german three manual church organ always based on high-quality recordings http://www.refined-apps.com/pitea/ again be careful the app works only 5 octaves. I'have those two apps, and I'm very satisfied, I used them even with my old Midi keyboard connected with a Roland USB/Midi compliant and even non Midi compliant, I suggest the first one. In any case read carefully the Refined Apps suggestions. You can also use two keyboards controlling upper an lower manual with a Midi merger like the Kenton one http://www.kentonuk.com/products/items/utilities/m-merge4.shtml. For IPad & Iphone go to visit http://polaron.de/Napo/index.html I hope to have been enough clear! -
Version 1.0
270 downloads
I was messing around tonight to see if I could create my own Hex Layer and came up with this. The four tones used are piano, pad, syn voice, and nylon guitar. No other modifications to the individual tones have been taken. I was looking for an etherial sound to use at church possibly during prayers. The Stage Setting works best below the C5 register. Please let me know what you think. I'm calling the Stage Setting PoPdCrNn. Cheers, Mark -
File Name: New Hex Layer File Submitter: ADeadGuy File Submitted: 03 Sep 2013 File Category: PX-5S Stage Settings I was messing around tonight to see if I could create my own Hex Layer and came up with this. The four tones used are piano, pad, syn voice, and nylon guitar. No other modifications to the individual tones have been taken. I was looking for an etherial sound to use at church possibly during prayers. The Stage Setting works best below the C5 register. Please let me know what you think. I'm calling the Stage Setting PoPdCrNn. Cheers, Mark Click here to download this file
