Guest Berthold Posted January 25, 2013 Share Posted January 25, 2013 Hi,I tried to install the software update (1.10) but unfortunately if failed. It stopped half way. I use a Macbook Air. The XW-P1 won't come up again.Any suggestions on what to do now?Tnx,Berthold Quote Link to comment Share on other sites More sharing options...
-ED- Posted January 25, 2013 Share Posted January 25, 2013 Uh oh, as far as I know that means a return to Casio.There was a known issue with the original Mac update file but that was fixed in the latest download so it must have been something else which caused it.Sorry can't help any more but perhaps Mike or Jared have a secret reset tip... Quote Link to comment Share on other sites More sharing options...
- T - Posted January 25, 2013 Share Posted January 25, 2013 BertholdI had the same problem from a Windows Vista machine. I suspect the problem was Vista, not the XW-P1. The update stopped about halfway through, the XW-P1 rebooted and could not come up. Fortunately, I was able to get it to come back up in UPDATE mode, so when I reconnected the USB cable, the update re-ran and all was fine (wheh !). If you have not tried getting the XW to came back up in UPDATE mode, give it a try. You might just luck out like I did.Good luck ! Quote Link to comment Share on other sites More sharing options...
bkonijn Posted January 25, 2013 Share Posted January 25, 2013 Hi Ted,Thanks, fortunately it worked for you. I tried to get it into UPDATE mode again (by holding EDIT and WRITE and then POWER) but I only get a blanc screen, that fades after a few seconds. Or is there another way to go to UPDATE mode? Quote Link to comment Share on other sites More sharing options...
- T - Posted January 25, 2013 Share Posted January 25, 2013 BertholdNo ! I just re-did the procedure to go into UPDATE mode and it worked. A friend, who has an XW-P1 told me I probably did get a complete load the first time, and just did not realize it, but then why wouldn't it come up after that first attempt ? Oh, well ! Sorry that won't work for you. Just wanted to share my experience with you in case you had not re-tried. Quote Link to comment Share on other sites More sharing options...
Technics Posted January 27, 2013 Share Posted January 27, 2013 @betholdtry to read this discussion topic in this forum:hope you kept the original box and receipt for the XW.Hi,I tried to install the software update (1.10) but unfortunately if failed. It stopped half way. I use a Macbook Air. The XW-P1 won't come up again.Any suggestions on what to do now?Tnx,Berthold Quote Link to comment Share on other sites More sharing options...
bkonijn Posted January 28, 2013 Share Posted January 28, 2013 Tnx for your responses. It is clear that the board has to be returned (defective flash memory on the main board).I contacted my dealer for a replacement. They don't have one, but they will contact Casio Benelux to discuss a solution.TBC. Quote Link to comment Share on other sites More sharing options...
bkonijn Posted February 16, 2013 Share Posted February 16, 2013 Today I recieved my replacement XW-P1. Thank you Casio and Musicas (dealer in The Netherlands) for the excellent service! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.