Sapper Posted December 30, 2016 Share Posted December 30, 2016 Is it possible to route only 2 banks to the effects? I have Bank 2 (sample melody of strings) sent to a delay effect and would like to send Bank 4 (synth lead) as well. I tried setting two toggle pads to the same delay effect but assigning one to Bank 2 and the other to Bank 4. When I activate the first one Bank 2 is sent to FX, but when I activate the second it stops routing Bank 2 and only routes Bank 4. Also, it doesn't seem possible to route two different effects (from different FX blocks) to two different banks. This kind of makes sense looking at the effects block chain, but I thought at a minimum one bank would go through two blocks, while the other would only go through one (later in the chain). Seems like all FX sends are routed only to the start of the effects chain. Anyone able to get more flexibility out of this? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 31, 2016 Share Posted December 31, 2016 The Trackformer does not have channel inserts for effects. All internal and external sound enters the effects chain as a mono mix from the mixer. Quote Link to comment Share on other sites More sharing options...
Sapper Posted December 31, 2016 Author Share Posted December 31, 2016 Thanks for the reply Brad. Looking back at the effects routing diagram I see that there is no way to 'insert' effects. I do wish there were more options for sending a combination of banks to the effects though. I can't imagine there would be any hardware limitation to sending banks 1 and 2 (or 2&4, or 1,2&3 etc.) to FX. You'd have to cycle through 14 options with step key 15 when assigning FX target, but it seems like it would be possible through a firmware update. So far I haven't got the 'Current Bank' FX target to work. Would be nice to put a LPF sweep on a pad from Bank 2, then switch to Bank 1 to sweep a lead without changing the pad. Maybe I'm doing it wrong... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.