AlanLaBudde Posted March 14, 2017 Share Posted March 14, 2017 i see how to set a track to mute or solo....annnd there is something about pre or post dsp pan...but? can i/how do i set each of the 17 tracks to its own pan position stereo wise?????? or ...is this not available? i would like to have the bass on the left speaker...piano on the right etc. Quote Link to comment Share on other sites More sharing options...
AlanLaBudde Posted March 15, 2017 Author Share Posted March 15, 2017 should i update the firmware? to get the mixer to intergrate with the 17track midi recordings? sometimes i hear bad things about updating firmware....? mhmmmm Quote Link to comment Share on other sites More sharing options...
AlanLaBudde Posted March 15, 2017 Author Share Posted March 15, 2017 (edited) PX-560 now has a header data overwrite function. Older units will need an update to the latest firmware. From the midi recorder, go to the mixer and make adjustments. To store the changes, hold the store button and press the midi play/stop button. The message "complete" will appear... "The header data overwrite function is for the midi recorder only. Make sure you are choosing the proper mixer port when you are making adjustments to tones. The midi recorder is port C".BradMZ quote. the midi recorder port is found in the lower left hand corner of the mixer screen....there is a,b,and c i believe....not sure what a and b are for...alan. Edited March 16, 2017 by AlanLaBudde completeness Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.