pax-eterna Posted April 21, 2017 Share Posted April 21, 2017 Just thought I'd run the 560 through Midi-Ox to see what is generated when pressing one registration button to see if there is some way to select the via MIDI. Turns out there are some sysex messages so it looks lit it might be possible...just need to sort exactly what one/s is/are needed hahaha! See the attached pictures to see what I mean - remember this is for ONE button push Had to do it in three snip pictures to capture all of it. Quote Link to comment Share on other sites More sharing options...
PriviaMan Posted April 21, 2017 Share Posted April 21, 2017 6 hours ago, pax-eterna said: Just thought I'd run the 560 through Midi-Ox to see what is generated when pressing one registration button to see if there is some way to select the via MIDI. Turns out there are some sysex messages so it looks lit it might be possible...just need to sort exactly what one/s is/are needed hahaha! See the attached pictures to see what I mean - remember this is for ONE button push Had to do it in three snip pictures to capture all of it. I have been there before, and couldn't figure out, let me know if you find out. Quote Link to comment Share on other sites More sharing options...
pax-eterna Posted April 22, 2017 Author Share Posted April 22, 2017 well all the RPN and effects CC's are not needed to select them (I just posted those for curiosity sake ). Just the Sysex. What I will do is extract the sysex data, and one by one send it to the 560 and see what happens. It could also turn out that ALL the sysex strings are needed haha! Quote Link to comment Share on other sites More sharing options...
JohnG7 Posted April 22, 2017 Share Posted April 22, 2017 If you take a look at the MIDI manual for PX5S you may get some idea of the format of the sysex, and what the messages contain. Chapters 16 & 17 have layouts of the messages and might be used to decode them. So far F0 = start of sysex 44 = Casio identifier 7E = non-real time sysex message 7F 7F I think = applies to all devices 02 = MIDI device 2 ??? (PX560?) 01 = IPS - Individual Parameter send 05 00 40 is the data F7 = end of Sysex. That's the first. I'll work slowly through the others, see if I can translate them. 1 Quote Link to comment Share on other sites More sharing options...
pax-eterna Posted April 22, 2017 Author Share Posted April 22, 2017 Thanks John, yeah I already knew all of that. But nice to have another person interested If I end up keeping the 560 I willinvestigate further, might ecen create an INS file as well. But unless these clipping at output jacks issues are resovled, it is going back! Quote Link to comment Share on other sites More sharing options...
pax-eterna Posted April 22, 2017 Author Share Posted April 22, 2017 okay so far nothing....just wondering if SYSEX Rx is disabled somehow on the 560? Might see if I can check this in the midi spec sheet... right, note 3 says However this is the main portal only for ALL Casio products...hmmm. Tried to do a search there and couldn't get very far haha! Quote Link to comment Share on other sites More sharing options...
pax-eterna Posted April 22, 2017 Author Share Posted April 22, 2017 Having another look at that list (and after seeing another similar thread) I see there are RPN msb/lsb and data entry messages...perhaps it's not as straighforward as simply sending a sysex...Man it would make it so much easier if we could select registrations using MSB/LSB Program changes as per the 5S... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.