AlenK Posted May 15, 2017 Share Posted May 15, 2017 Adding Functions to the Foot Pedal View File This is an example of using the step sequencer within a Performance to allow the optional foot pedal to do things beyond the standard functions supported directly by the XW synths. You can read about how it works in section 5.2.3 of The XW-P1 Companion, Volume 1 (Rev 4 or later). This example merely switches between tones in two zones but you can use it as a template to do something more useful. It should work on both XW models: P1 and G1. There are two required components in the zip file: a Performance and a step sequence. Load them where you want to in your XW synth. Now edit the Performance to point to the step sequence. NOTE: Control of the step sequencer for this application requires the "S.Seq NRPN" parameter in the MIDI Settings menu to be set to "On"; see page E-70 in the XW-P1 User's Guide or page E-82 in the XW-G1's User's Guide. This is a global setting that is not stored in a Performance hence must be enabled manually. Submitter AlenK Submitted 05/15/2017 Category XW-Synths Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.