christoph49 Posted July 8, 2017 Share Posted July 8, 2017 Hi, I want to control an analog synth modul with the XW step sequencer over MIDI OUT. I have a MIDI to CV/Gate Converter and can control it with the MIDI OUT [Key] selection over the XW's Keyboard. But if I play a step Sequence I don't receive a signal at the MIDI/CV Converter. How can I change the settings from the XW to get the sequencer controlling the Converter? The MIDI chanel of the Converter is chn 1 by default and I read that the sequencer parts are linked with MIDI chanel 8- 16. How and where can I change this ? I tried in Performance Mode MIDI > Edit > Seq > Solo1 > [1] but there is still no input at the Converter. If I swap MIDI OUT chanel to 15 and try the Learn Button at the converter there is no signal, too. Thanx Christoph. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted July 9, 2017 Share Posted July 9, 2017 You have to turn on MIDI output for the step sequencer parts. To quote Mike Martin from 5 years ago ..."Edit your PERFORMANCE. Scroll down to MIDI Edit, press enter. Use the Part +/- buttons and select tracks 8-16 turn MIDI (or USB) ON." The output channels are 8-16. I haven't looked lately but I am pretty sure the out channels are fixed. Quote Link to comment Share on other sites More sharing options...
christoph49 Posted July 9, 2017 Author Share Posted July 9, 2017 Yes, worked. In each Sequence you can attach a part to a MIDI channel and MIDI OUT has to be turned ON. The Converter gets this channel by holding the learn button. Thanx a lot, Christoph. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.