Pianoslam Posted September 2, 2017 Share Posted September 2, 2017 Could some tell me how to assign a volume pedal to a zone please? Quote Link to comment Share on other sites More sharing options...
AlenK Posted September 3, 2017 Share Posted September 3, 2017 I suspect there has been no reply because you can't really do what you seem to want to do with the PX-5S. Its pedal input doesn't have the required circuitry to work with a Roland (or indeed any) expression pedal (e.g., EV-5). It's only meant for a switch-type pedal. But then you also mention _volume_ pedal in the body of your post. If that's what you really meant you can of course connect the PX-5S's audio output through such a pedal but you can't selectively send the output of individual zones through it. Not unless you are prepared to sacrifice stereo capability, which would allow you to use, say, the PX-5S's left audio output for sending through the volume pedal and the right output for bypassing it. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted September 3, 2017 Share Posted September 3, 2017 Try using a standard sustain pedal for volume control first. You might be surprised how well it works. You can program a pedal input with on/off rates and min/max levels for either volume or expression. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.