Bigmark Posted April 9, 2014 Share Posted April 9, 2014 I've created a two zone performance patch,with a synth on the left zone and a piano on the right.I want the left zone to have an arpeggio and the right zone with no arpeggio .I can't for the life of me get it to work , it's either or neither ?What am I doing wrong ? Quote Link to comment Share on other sites More sharing options...
Bigmark Posted April 9, 2014 Author Share Posted April 9, 2014 No worries I Sussed it. Quote Link to comment Share on other sites More sharing options...
Miffee Posted June 25, 2014 Share Posted June 25, 2014 I got the same problem, please can you tell me how you did it!!?! 1 Quote Link to comment Share on other sites More sharing options...
maarkr Posted June 29, 2014 Share Posted June 29, 2014 turn on the arp and save the performance. in the zone you don't want the arp to be active, (its not in front of me now) there's an arp enable in one of the menu's options, maybe controller? turn it off. 1 Quote Link to comment Share on other sites More sharing options...
Miffee Posted July 2, 2014 Share Posted July 2, 2014 Thanks maarkr! Easy when you know how........ Quote Link to comment Share on other sites More sharing options...
CarloKey Posted July 3, 2014 Share Posted July 3, 2014 good advice! Quote Link to comment Share on other sites More sharing options...
Miffee Posted July 4, 2014 Share Posted July 4, 2014 I'm sorry I still can't get it to work! I'm obviously missing something. I have done what maarkr suggested - the "Arp Enable" is set to NO - but still getting arpeggios where I don't want them Please help. Quote Link to comment Share on other sites More sharing options...
Gnomo Alegre Posted July 4, 2014 Share Posted July 4, 2014 I'm sorry I still can't get it to work! I'm obviously missing something. I have done what maarkr suggested - the "Arp Enable" is set to NO - but still getting arpeggios where I don't want them Please help.Hello:You have to specify the range of the keyboard where you like to act the arpeggio. Quote Link to comment Share on other sites More sharing options...
Jokeyman123 Posted July 4, 2014 Share Posted July 4, 2014 There are actually 2 edit screens that affect arpeggio triggering in a performance. In performance "edit" go to "prfrmfilter" submenu-select arpeggio and turn this off. This turns off any arpeggio that might be part of a sequence stored as part of the performance. This might be why you are still triggering arpeggios. If you do that without hitting "write" the performance will revert back to arpeggio on. There is a 2nd edit screen in performance edit under "zone parameter" edit which is what maarkr is referring to I think-go to the "arp enable" function and turn that off for each zone. Again, hit the "write" button or your changes will revert back. many of the preset performances have embedded sequences which will trigger an arpeggio depending on keyzone. If you created your new performance from an existing performance, this might be why the arpeggio is still active, it already had a sequence with an arpeggio pre-programmed into it in a keyzone. Hope this helps. 1 Quote Link to comment Share on other sites More sharing options...
maarkr Posted July 7, 2014 Share Posted July 7, 2014 yep, i went to Zone Param page 8 and turned the arp enable to OFF. that worked for a performance i did recently where i had a bass on the left keyboard zone that was ARP'd (zone 1) and the normal guitar on the right key zone (zone 2). Quote Link to comment Share on other sites More sharing options...
Miffee Posted July 15, 2014 Share Posted July 15, 2014 In case anyone else has this problem (or if I forget!)...... You have to go to Edit > Sequencers > Arpeggio then specify the Key Range for the arpeggio, like you do with the Key Range for the tone. So I guess you have to do that as well as switch ArpEnable to off.Thanks guys 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.