Dave Costello Posted May 30, 2014 Share Posted May 30, 2014 Greetings, I just purchased a wk-7600 and have been working with layers. I may have missed it in the manual, but I can't seem to figure out how toadjust the volume on the actual layer tone. Would love if someone could help me out. Manual is not clear. Thanks,Dave Quote Link to comment Share on other sites More sharing options...
piano_71 Posted May 30, 2014 Share Posted May 30, 2014 It's actually buried in the menus for mixer settings (p. E-36 in the manual). Parts A01 and A02 are upper 1 and upper 2, respectively. Part A03 is the lower part. Adjust the relative volume of these parts in the mixer, and that will adjust the balance of the two tones you layered. Quote Link to comment Share on other sites More sharing options...
Julian Posted August 26, 2014 Share Posted August 26, 2014 ALSO I am disappointed you have to cancel the layer or split to change the main voice (part one) It is not helpful for performingeOn the wk8000 you can change each layered voice by using the left and right arrow buttons to switch between part on and part two voices WITHOUT CANCELLING THE LAYER OR SPLIT FUNCTION. If someone can prove me wrong please let me know cheers 1 Quote Link to comment Share on other sites More sharing options...
silencely Posted December 24, 2014 Share Posted December 24, 2014 ALSO I am disappointed you have to cancel the layer or split to change the main voice (part one) It is not helpful for performingeOn the wk8000 you can change each layered voice by using the left and right arrow buttons to switch between part on and part two voices WITHOUT CANCELLING THE LAYER OR SPLIT FUNCTION. If someone can prove me wrong please let me know cheers Yeah it was quite problematic fact for me as well at the first glance.But I sought a way the problem by utilizing the registration buttons to use certain tones that either layered/splitted or not layered/splitted. Quote Link to comment Share on other sites More sharing options...
Julian Posted December 26, 2014 Share Posted December 26, 2014 its a disappointment, layers and splits need to be changed in real time, not messy mixers or set up registrations. If id have done proper research I would not have bought the wk7600 1 Quote Link to comment Share on other sites More sharing options...
Kelsen L Pereira Posted December 22, 2015 Share Posted December 22, 2015 its a disappointment, layers and splits need to be changed in real time, not messy mixers or set up registrations. If id have done proper research I would not have bought the wk7600JulianDont remember having another brand that has neglected this basic detail of operation for the tone change in split mode or layer.Sorry my bad english! Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 22, 2015 Share Posted December 22, 2015 Registrations, registrations, registrations! This is what they are there for. You are supposed to set up all of your layers and splits before a performance. If you are not doing this, you are not treating it like a professional gig. You are performing like you are at a jam session. Casio, Roland, Korg, Yamaha, etc... all have something like registrations for professional gigging musicians. Use them. Learn to love them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.