Mike Martin Posted March 4, 2013 Share Posted March 4, 2013 After the reaction from the PX-5S version, I re-created sequence part of this using the XW-P1. I'll also convert it for the XW-G1 tomorrow.In the file which is attached you'll find that there are three files.There are some things you'll have to do.1. Load the three files into your XW-P1.On the Run.ZPF - This is the PerformanceSquare+Hihat.ZSY - This is the Solo Synth patchOn the Run.ZAR - This is the custom arpeggioThe tricky thing about sharing Performances on the XW series is that the Performance doesn't know which objects specifically are associated with it. It just references the location where something was. If you don't load it into the same location as I created it in, then the Performance won't work.So after you've loaded in the Performance and the other 2 files, you're going to need to edit the Performance. Press EDITScroll down and select SequencersChoose ArpeggioMark sure that the Arpeggio you see on this screen is "On the Run". On my XW, this was User 0-0Exit Back to the main Performance Edit screen.Select ZONE EditMake sure that Zone 1 has the Square+HiHat program selected.Save your performanceIt should now work. The song was in the key of E. Press and hold E3 (the one below middle C) and move knobs 1 and 2, and also check out the modwheel.Only two oscillators are in use in this version. #1 and #4. I ended up just using a hi-hat sample because I couldn't get the noise oscillator at quite the right pitch.On The Run XW-P1.zip Quote Link to comment Share on other sites More sharing options...
Sean777 Posted March 4, 2013 Share Posted March 4, 2013 Thanks...Great sound effect! More meat for us WX-P1 user to chew on Here's the sweep I used on the Euphoric Trance...post on sound cloud under user name Sean777.Download file rename extension .zip to .zsySweep11.Zip Quote Link to comment Share on other sites More sharing options...
Joed Posted March 20, 2013 Share Posted March 20, 2013 Hi Mike,I am new to the forum, Casio and new to the XW-P1. I am starting to get a handle on things, but have a question. I have the arpeggio running and that part sounds really good. Lots of controls to change the warble etc. The one thing I do not find are the Doppler effect flybys, helicopters etc. How were these created? Are these included in the file and I just have not found them or do they need to be created separately? Quote Link to comment Share on other sites More sharing options...
powertrader Posted February 21, 2015 Share Posted February 21, 2015 Did the xw-g1 version ever come out? I cannot find it. Thank you, PowerTrader Quote Link to comment Share on other sites More sharing options...
maarkr Posted February 22, 2015 Share Posted February 22, 2015 thanks mike, altho the PX version is awsome, i did learn that the reason some dl'd perf's don't work is the fact that the supporting files may not load in the same user preset, so I need to link those up in the performance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.