Midi question PX5

[Nova]

Hello..

I want to midi a module to the px5...I dont want to control any tones, change any sounds or

do any type of complicated performance setup..

I simply want to midi the box and play it thru the 5..I will control each entity seperate. In other words, I dont want to

hit a button on the 5 and change the tone of the module. I want to keep piano sound on the module and CHANGE tones on the 5

while Im playing switching between whatever tone I want to use. I simply want to play the sounds of the module w/out the 5 controlling in in any way.

Im going to try this today, will go into stage settings midi, global and look around.

Also, if I can figure this, will it need reset at every power on?

 

Thx, I appt your kindness.

[Mike Martin]

Connect a MIDI Cable and play.  By default all the Stage Settings transmit out the MIDI out.

[Nova]

Ok, as I mentioned..I dont want to change the tones on the module with any button press on the px5. I want to control each axe independently.

Im not sure what u mean by "By default all the Stage Settings transmit out the MIDI out." I dont want the 5 to change anything on the module

w/the press of any button. Example, AP sound on the module whole gig, while changing sounds on the 5 to basically embelish the module piano tone of the module.

Thx for your reply. Apptd.

[Display Name]

I don't know if you can do this globally but you can turn off program change by Stage Setting. See the Privia Pro blog:
http://priviapro.wordpress.com/2013/05/21/px-5s-sending-program-changes-to-external-gear/

 

It may be easier to turn off the program change receive on your module. 
 

[Nova]

I'll try that...thnk u.