Nova Posted November 11, 2014 Share Posted November 11, 2014 Hello.. I have a question, am using a Musebox sound module w/a px5.I DO NOT want to control the Musebox w/the 5 as I only use AP tones on the Muse.But I want to switch between sounds on the 5 while midi'd to the Muse and NOT change thetone(sound) on the Muse. The settings stock in the 5 DO change the sound on the Muse. What do I need to change on the 5 and where would I find the settings? Im pretty sure I can dissable miditransmit? Is that what I need? Ive had a few questions on this forum, and theyve always been answered great, so thanks ahead of time. Quote Link to comment Share on other sites More sharing options...
Nova Posted November 11, 2014 Author Share Posted November 11, 2014 OK, I went to system n found midi settings..is this machine capable of doing what Im looking 4? Quote Link to comment Share on other sites More sharing options...
BeowulfX Posted November 12, 2014 Share Posted November 12, 2014 I'm not currently in front of my PX-5S right now, but may be you could check if there's a program change setup in the stage setting you're currently using which may be transmitting that MIDI info in the MIDI channel (this is MIDI channel 1, for zone 1 of a stage setting by default) towards MIDI receive channel of Musebox. Or if you have a PC, try using the editor and check the stage setting you're currently using by default. Unfortunately, I don't own a Musebox so I'm not sure where to find the MIDI setup parameters in it. But if you find the MIDI setup in the Musebox, you may want to check the MIDI channel which receives the MIDI signal coming from one of the zones (in a stage setting) of the PX-5S. IIRC, if you disable MIDI transmit, then you'd only hear the sounds of the PX-5S and the Musebox will not produce any sound as you play the PX-5S since no MIDI data is transmitted from Casio to Musebox gear. I'm quite sure other members will have better ideas/suggestions or workarounds just wait around a bit Quote Link to comment Share on other sites More sharing options...
Display Name Posted November 12, 2014 Share Posted November 12, 2014 Not 100% sure if this will work, but in the MIDI settings put the Stage Setting Change to NRPN. Let me know if it works! Quote Link to comment Share on other sites More sharing options...
Nova Posted November 12, 2014 Author Share Posted November 12, 2014 Will check out the suggestions. Thanks all, very apptd. Quote Link to comment Share on other sites More sharing options...
Nova Posted November 13, 2014 Author Share Posted November 13, 2014 Not 100% sure if this will work, but in the MIDI settings put the Stage Setting Change to NRPN. Let me know if it works!Under system settings midi is where this is..its set to that, she no work. I have also set program changes to off, no work.This is simple on older machines, not so anymore. Is also simple on my PX3 but I really dont use that anymore.There has to be a simple way to do this. Anyone? I'll keep trying things. Appt the help. Quote Link to comment Share on other sites More sharing options...
Choppin Posted November 13, 2014 Share Posted November 13, 2014 try: [EDIT] > Stage Settings > Zone Edit > Midi Edit > Prog & Bank Out [Off] This should be done for each zone that is On. Quote Link to comment Share on other sites More sharing options...
Nova Posted November 14, 2014 Author Share Posted November 14, 2014 NRPN worked, have to go to system 1st.Thank you all.Really appt the friendly advice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.