JMA Posted January 11, 2015 Share Posted January 11, 2015 Hello I don't understand the control.Do we have to use it for external instrument ? Is is for control sound of canal of bass for example ?I mean the canal 13. Thank you. Quote Link to comment Share on other sites More sharing options...
XW-Addict Posted January 11, 2015 Share Posted January 11, 2015 You can use control for channel 1 and channel 8 to 16 in case of the XW-G1 , the P1 has more channels. When you're programming a channel such as C1 / Control 1. Navigate to the trackparam menu from there,you can assign which channel make use of control information for C1. Press Step sequence button brings the Sseq mode up. Then press the edit button a menu comes up and you see Trk on/off , Step Edit , Track Param etc. There are two way's for selecting channels either is with the same result. Navigate to Trk on/off press enter, go to part and use No/Yes for selecting Ctl1 or the other ones.Then press exit button once, Navigate to Track Param to assign at Ctrl chan which channel it has to use. The second one is if you're in the Sseq mode menu select Step Edit and use the Part buttons - / + to go into theCtrl channel pattern panel of choice either Ctl1 or the other 3. Then press exit button once. Navigate to Track Param to assign at Ctrl Chan which channel it has to use. Same is for C2,C3 and C4. You can do lots of stuff with Ctrl like changing tones for a particular channel or panning , reverb and what not. I use it as midi-cc FX module 1 Quote Link to comment Share on other sites More sharing options...
JMA Posted January 11, 2015 Author Share Posted January 11, 2015 HiI have a P1.You mean when I put control 1,for example,on channel 13,the bass,I can use the control of sound ? Whit knobs ? or other ?Thank for your answer 1 Quote Link to comment Share on other sites More sharing options...
JMA Posted January 11, 2015 Author Share Posted January 11, 2015 Sorry,it's me again.I forget to tell, I don't use external instrument other than the keyboard. Quote Link to comment Share on other sites More sharing options...
syrupcore Posted January 14, 2015 Share Posted January 14, 2015 I'm probably not the best to help here but we should make sure we're all talking about the same "control"s because there are a few. Which are you asking about? A ) the 4 physical Control knobs above the step sequencer (k1-k4)B ) the 4 Controller tracks within the step sequencer C ) Virtual ControllersD ) some other controller I haven't learned about yet Quote Link to comment Share on other sites More sharing options...
JMA Posted January 14, 2015 Author Share Posted January 14, 2015 HiI'm sure you can help me.I talk about the 4 controller tracks winthin the step sequencer.And it's true that for the virtual controller,I don't understand very well too. Thanks for answer. Quote Link to comment Share on other sites More sharing options...
Gnomo Alegre Posted January 14, 2015 Share Posted January 14, 2015 43:00 min. Quote Link to comment Share on other sites More sharing options...
JMA Posted January 15, 2015 Author Share Posted January 15, 2015 Thank you.It's answring very well to my questions.I have to watch it again but this time in front of my keyboard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.