dama Posted February 15, 2015 Share Posted February 15, 2015 I need help with a Midi issue. I would like to play the keys of my Casio and trigger sounds that are on my Nord. I feel I've taken all the right steps but I'm still not hearing any sound when playing the keys of the Px-5s. I've posted on the Nord site but I haven't solved the problem. I'm thinking it is a setting in the Casio that is preventing this from happening. These are the setting that I'm using I have a midi cable "in" with the Nord, that connects into the Casio midi "out".I have both keyboards set to channel 1 and the Casio set to Local off.The Casio is set as "Slave". Hight Res "On". Device Id=1, Basic channel 1. I have done a 7. CC send and a 9. Dump All, on the Nord. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Joe Muscara Posted February 15, 2015 Share Posted February 15, 2015 Why do you have the Casio set as Slave? If anything, I think it should be Master. Also, you may want to turn off High Res MIDI. I know my Electro 2 expected different info on that channel, though I don't know about the NE 3. In any case, it doesn't know Hi Res MIDI so no need to send it. Quote Link to comment Share on other sites More sharing options...
Display Name Posted February 15, 2015 Share Posted February 15, 2015 Sorry to ask the obvious, but you do have audio cables coming from the Nord and not the Casio, correct? 1 Quote Link to comment Share on other sites More sharing options...
dama Posted February 16, 2015 Author Share Posted February 16, 2015 Thanks for your help. I have turned off the hi res and set it back to master, but still no sound is being produced. For audio outputs, I am using cables for right and left channel outputs from both the Nord and the Casio that run into my mixer. The keyboards work when I'm not hooking them up midi. There is sound from the Nord. I am listening through headphones. I have tried all combinations with hooking up the Midi cable. Each end of the Midi cable has an orange plug and a grey one. That may be orange = + and grey + = -. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted February 16, 2015 Share Posted February 16, 2015 Check system settings midi outputs. Sys settings - midi - midi out select - should be set to "key" Check your stage setting midi out. Edit - stage setting - zone - midi edit - midi out - should be "on". Also check external out channel while here. Ch1 1 Quote Link to comment Share on other sites More sharing options...
dama Posted February 16, 2015 Author Share Posted February 16, 2015 Thanks you for your help! It's working now. I didn't have the Midi out set to key. The orange end of the cable is used for the Nord "in" and Casio "out". I'm not sure if that matters. I do need to learn more about Midi, read up on it more. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.