Skyscrapersax Posted July 14, 2015 Share Posted July 14, 2015 OK, so I set up a split for piano and bass... Now, I want to use a VST piano (Ivory Fazoli). I can use "Omni" for MIDI channel, and the entire ranger for the keyboard sounds the Fazoli piano sounds. BUT: If I use MIDI channel 1, only the range that I assigned to the piano (for Casio sounds) sounds. The rest (bass area) is silent. I can't figure out how to make the zone "whole." Hopefully that is enough information... Thanks... Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted July 14, 2015 Share Posted July 14, 2015 I see you found the answer to this. You were thinking of it wrong. The PX-5s is always a midi controller, even for it's own internal sounds. If a zone key range is limited for internal sounds, it will be for external as well. When you want to combine internal and external sounds where you need different controller settings for each, you should use 2 zones. Same as how you would do it for internal sounds alone. 1 Quote Link to comment Share on other sites More sharing options...
Choppin Posted July 15, 2015 Share Posted July 15, 2015 Not in front of the PX right now, but you can make the midi out for both zones channel 1 - then any midi instrument will pick up the entire range assigned between both zones. Each zones midi out can be assigned to any channel, however, they receive on channels 1-4 respectively. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.