zdubair Posted October 12, 2016 Share Posted October 12, 2016 (edited) Hello I wonder if Casio CTK 6250 can record more than one song? If one song is made, can it be saved and a new song be created? I also wonder if there is some way to turn off the speakers without using headphones? Greetings Zdubair Edited October 12, 2016 by zdubair misspelt Quote Link to comment Share on other sites More sharing options...
- T - Posted October 12, 2016 Share Posted October 12, 2016 The CTK-6250 can store up to five recorded songs in internal memory, but the total number of notes (for all songs) can not exceed approximately 12,000. So if you have five songs, whose note counts total approximately 12,000, then you can store all five songs, but if you have four songs, whose note counts total approximately 12,000, then you can only store four songs, or if you have one song, whose note count is approximately 12,000, then you can store only that one song. The internal memory location is selected before starting the recording, and saving to that location is automatic when the recording is stopped. Any previously recorded data in that locaton will be overwritten with the new data, so if all five memory locations are full, critical data should be saved to the SD Card to free up memory location(s) before recording new data. Inserting a 1/4" to 1/8" stereo headphone adapter (with no headphones connected to it) will cut off sound to the internal speakers, but you can use the FUNCTION menus for a more "professional" way to turn off the internal speakers: Press the FUNCTION button. Press the RIGHT ARROW ( > ) button to go to page 2/2 of this menu. Press the DOWN ARROW ( V ) button TWICE to go down to " General ". Press the ENTER button. The top item on this page ( " Speaker " ) should already be selected. Press the MINUS ( - ) button to change [[ on ]] to [[ oFF ]]. Press the EXIT button TWICE to return to normal play mode. Your internal speakers will now be silenced. To turn the speakers back on, repeat the above procedure, except in the 6th step, use the PLUS ( + ) button to change [[ oFF ]] to [[ on ]]. Quote Link to comment Share on other sites More sharing options...
zdubair Posted October 25, 2016 Author Share Posted October 25, 2016 Tx... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.