christoph49
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by christoph49
-
-
Hello,
I want to generate some MIDI data with an Arduino and send them over MIDI
to my XW-G1 Synth to Play some voicings.
But unfortunately I don' t get any Sound ( Arduino MIDI Out > XW-G1 MIDI In).
I Editted MIDI in Tone Mode and switched "MIDI IN" to "on" .
I tried to Play voicings per MIDI IN with a Yamaha QY10 and it worked.
How must I Change Settings of the XW to get voicings Play over MIDI In ??
Thanx a lot
Christoph.
-
Yes, worked.
In each Sequence you can attach a part to a MIDI channel and MIDI OUT has to be turned ON.
The Converter gets this channel by holding the learn button.
Thanx a lot, Christoph.
-
Hi,
I want to control an analog synth modul with the XW step sequencer over MIDI OUT. I have a MIDI to CV/Gate
Converter and can control it with the MIDI OUT [Key] selection over the XW's Keyboard. But if I play a step Sequence
I don't receive a signal at the MIDI/CV Converter. How can I change the settings from the XW to get the sequencer controlling the
Converter?
The MIDI chanel of the Converter is chn 1 by default and I read that the sequencer parts are linked with MIDI chanel 8- 16.
How and where can I change this ?
I tried in Performance Mode MIDI > Edit > Seq > Solo1 > [1] but there is still no input at the Converter.
If I swap MIDI OUT chanel to 15 and try the Learn Button at the converter there is no signal, too.
Thanx Christoph.
XW-G1 with Arduino
in XW-G1 Specific
Posted
Sorry, I tried " Settings > MIDI IN > On" but I got no Sound.
I testet my Soundsource with another device which worked.
So please take a look of my Arduino Sketch, especially the "noteOnStatus" Byte. The Author of
the book I got the Sketch from wrote its value is 144 (0x90) + 1-16 (MIDI Chanels). Maybe different
with the XW- G1 ?
MidiTest.ino