christoph49

Sorry, I tried " Settings > MIDI IN > On" but I got no Sound.

I testet my Soundsource with another device which worked.

So please take a look of my Arduino Sketch, especially the "noteOnStatus" Byte. The Author of

the book I got the Sketch from wrote its value is 144 (0x90) + 1-16 (MIDI Chanels). Maybe different

with the XW- G1 ?

MidiTest.ino

Hello,

I want to generate some MIDI data with an Arduino and send them over MIDI

to my XW-G1 Synth to Play some voicings.

But unfortunately I don' t get any Sound ( Arduino MIDI Out > XW-G1 MIDI In).

I Editted MIDI in Tone Mode and switched "MIDI IN" to "on" .

I tried to Play voicings per MIDI IN with a Yamaha QY10 and it worked.

How must I Change Settings of the XW to get voicings Play over MIDI In ??

Thanx a lot

Christoph. 

Yes, worked.

In each Sequence you can attach a part to a MIDI channel and MIDI OUT has to be turned ON.

The Converter gets this channel by holding the learn button.

Thanx a lot, Christoph.

Hi,

I want to control an analog synth modul with the XW step sequencer over MIDI OUT. I have a MIDI to CV/Gate

Converter and can control it with the MIDI OUT [Key] selection over the XW's Keyboard. But if I play a step Sequence

I don't receive a signal at the MIDI/CV Converter. How can I change the settings from the XW to get the sequencer controlling the

Converter?

The MIDI chanel of the Converter is chn 1 by default and I read that the sequencer parts are linked with MIDI chanel 8- 16.

How and where can I change this ? 

I tried in Performance Mode MIDI > Edit > Seq > Solo1 > [1] but there is still no input at the Converter.

If I swap MIDI OUT chanel to 15 and try the Learn Button at the converter there is no signal, too.

Thanx Christoph.