Kristian Terzic

Here is a great sounding Rhodes layered with a Voice pad.
Download the 3 files, the first hex-layer tone is the Clean73Mark1 (Rhodes) & the second one is the hex-layer Angels Sing 2 (Voicepad) and the third file is the Registration file called Ep & Pad.
Load both hex-layer tones in your PX-560M user slots and than load the Registration in one slot and Store it. After loading the Registration place the Clean73Mark1 (Rhodes) tone in the Upper 1 & the second tone Angel Sings 2 in the Upper 2 and than Store the registration again.
 
Knob 1 - Amp (you can choose between various Amp models which drastically change the sound of the Rhodes)
Knob 2 - Reverb
Knob 3 - Chorus
Modulation Wheel - Tremolo of the Rhodes 
Expression pedal - Volume/Expression for the Voicepad (not affecting the Rhodes)
 
Pressing the Split button you'll have acess to a bass tone in the lower pasrt of the keyboard.
 
Hope you like the sound and you'll have good use of it for your live perofrmances!
 
Here is the link of the video demo, it starts at 0:54 sec:
 
 

This is my attempt at customizing a Hex-Layer organ tone layered with a Wurly. I've assign some pseudo drawbars to Knobs 1 & 3 & overdrive to Knob 2, the Modulation Wheel works as Leslie Slow/Fast and the Expression Pedal as Volume/Swell for the Organ not affecting the Wurly.
 
Dowload the 2 files, one is the hex-layer organ which needs to be loaded in the hex-layer user slot and the other is the registration for the respective tone. Once you saved the organ tone in the keyboard load the registration and place the Organbar tone in the first Upper 1 zone and than save again the registration.
 
Knob 1 - Volume for 2 Drawbars (midrange)
Knob 2 - Overdrive for the Organ (be careful with the amount)
Knob 3 - Volume for 2 Drawbars (high range)
Modulation Wheel - Controlse the Speed & Fast Rate of the Leslie Speaker (try all the values of the wheel casue it increases exponentially)
Expression Pedal - Controls the Volume/Sweel of the Organ
 
Pressing the Split button you'll have immediate access to a bass sound.
Also I've assign a preset Rhythm with which you can jam.
 
Hope you like it and you'll have a good use of it for your live performances!
 
Here is the video demo fo the sound:
 
 
 
 

This is a Stage Setting programmed for the song Sailing by Christopher Cross.
Pedal 2 is assigned to filter and when pressed is intended to be used on the chorus of the song. The pedal it's programmed to momentary so you need to press it and hold it down as long as you want the filter to be opened and release it when you want the darker-closer sound which is intended for the verse.
You can also play the original piano solo with this sound (I forgot to play in this video,SORRY) by lowering down Slider 2 on which is assigned the Expression for the Pad & Guitar.
The Strings intro is the original audio file from the song that I cut out and palyed back from the PX5S thumb drive.
I was trying to upload the wave file also as a part of the download but it seams that the file is too big to be uploaded on the forum (2mb) so here you have the Stage Setting that I'm using on this video that was done on NAMM 2015.

Hope you like it and thatt will be usefull for you,
Kristian Terzic

Mezzoforte EP - programed by Kristian Terzic
I've tryed to emulate the Digital Electric Piano sound from the song "Playing For Time" of the Icelandic jazz-fusion band Mezzoforte.
It's a work in progress and this is the first version.
Stage Setting with 4 zones, 3 zones are active (1,3,4) and zone 2 can be turned on with the Pedal number 2 on which is assigned the function Zone on/off...
Here is the audio demo of the Mezzoforte EP:
https://soundcloud.com/casio-px-5s/mezzoforte-ep-casio-px5s-demo-by-kristian-terzic
And here you have the original song by Mezzoforte:

PinballEP2Pad this is the stage setting that i made for my tune called "Pinball Blues" and I used it on the Casio booth live stream on SXSW 2014 in Austin TX.
Stage Setting tha uses all 4 Zones:
Zone 1 - Crunch EP2 (Hex Layer) - downloaded from the Casio Music Forum
Zone 2 - Too Close (Hex Layer) - downloaded from the Casio Music Forum
Zone 3 - Brass Section - preset from the String/Brass section
Zone 4 - Click Organ - preset from the Organ section
Controller assignements:
Pedal 1 - Sustain (sustains all zones except the Zone 3 Brass sound)
Pedal 2 - Zone On/Off (with this pedal you turn the Brass sound on/off)
Mod.Wheel - Delay intensity (from 0-127)
Slider 1 - Distortion level for the Electric Piano
Slider 2 - Amp.simulation
Slider 3 - Dist.Low / Dist.High
Slider 4 - Chorus
Slider 5 - Volume for Zone 2 (Pad sound)
Slider 6 - Volume for Zone 4 (Organ Sound)

Here is the link of the video on which i'm using this stage setting with the backing track wave file played drectlly from the PX5S thumb drive.The Wave file is the original backing track from my album with live Drums/Bass/Guitar/Trumpet minus the keyboards which I'm playing live on the PX5S! I'm playing a solo synth lead part on the Casio XW-P1 but i don't remember what was the sound name that i used on the video,maybe Mike will know.
Hope you like it and you can use it as a template for your own stage settings!
All the best,
Kristian Terzic