User 29303

Same to me sometime switching from One Stage to another continous tone from Old Stage until i turn px5 off

I did a downgrade from 1.12 to 1,11 wthout problems and back to1.12 try redowloading the bin maybe it is broken

Yes this goes near my idea because i try to emulate some of the wavestation sounds and others ..unfortunatly my tinitus came back this days very hard so i am a bit offtopic from my px5 until i got response from a.doctor maybe id esagerate with headphones ..

i tried but i am unsure here

[Exit]

• Quote
• MultiQuote
   
•  

So i will try this later of course we can trugger the dsp frrom the arpeggio but not the Lfo in the tone section right ?

Yes but if you change some in your stage and you save it the tone is gone so if you like to recall it later or you have to save the tone from inside the stage or you have to take care to have a copy of your old stage i always save the tones i like t. Use them for other stages

i wonder if the CC gives me the possibility to trigger the LFO with the Arpeggio ...?i really miss a Sync to LFO

in the HEX section this would give us more room to make rhythm tracks with the LFO synced to the keys...

 

 

maybe possible in a future update ?

 

 

 

It depends on the D2 have played with the EQ on the other Pianos i have tried to make some undelaying stuff to simulate .resonance or hammer or deeper bass and other stuff it is a matter of hearing and like it or not ...so i think every patch has to be your personal like it or not patch ,,,,

 

here are some tipps for using the EQ,,,,,,

 

Instrument What to Cut Why to Cut What to Boost Why to Boost

Human Voice

7 kHz

Sibilance

8 kHz

Big sound

 

2 kHz

Shrill

3 kHz and above

Clarity

 

1 kHz

Nasal

200-400 Hz

Body

 

90 Hz and below

Popping P’s

—

—

Piano

1-2 kHz

Tinny

5 kHz

More presence

 

300 Hz

Boomy

100 Hz

Bottom end

Electric Guitar

1-2 kHz

Shrill

3 kHz

Clarity

 

90 Hz and below

Muddy

125 Hz

Bottom end

Acoustic Guitar

2-3 kHz

Tinny

5 kHz and above

Sparkle

 

200 Hz

Boomy

125 kHz

Full

Electric Bass

1 kHz

Thin

600 Hz

Growl

 

125 Hz

Boomy

90 Hz and below

Bottom end

String Bass

600 Hz

Hollow

2-5 kHz

Sharp attack

 

200 Hz

Boomy

125 Hz and below

Bottom end

Snare Drum

1 kHz

Annoying

2 kHz

Crisp

 

 

 

150-200 Hz

Full

 

 

 

90 Hz

Deep

Kick Drum

400 Hz

Muddy

2-5 kHz

Sharp attack

 

90 Hz and below

Boomy

60-125 Hz

Bottom end

Toms

300 Hz

Boomy

2-5 kHz

Sharp attack

 

 

 

90-200 Hz

Bottom end

Cymbals

1 kHz

Annoying

7-8 kHz

Sizzle

 

 

 

8-12 kHz

Brilliance

 

 

 

15 kHz

Air

Horns

1 kHz

Honky

8-12 kHz

Big sound

 

120 Hz and below

Muddy

2 kHz

Clarity

String section

3 kHz

Shrill

2 kHz

Clarity

 

120 Hz and below

Muddy

400-600 Hz

Lush and full

finaly i found a helping hand ....for getting the 1.11  thank you kgaetano,,,,well it is done no problems

after resinstalling firmware 1.11 of course my button problem ms to be a hardware issue and i wonder

if the buttons of the PX5 will be strong enough to survive few years...

 

no i am going to reistall version 1.12 because i am still the opinion there was made some changes affecting

the quality of sound.....

 

 

 

 

P.S Question to Mike if got my PX5 from an Italian Dealer but i went back to Germany now i am here how do i

repair my PX5 ? ...can i go to  local dealer with my Garanty or do i have to register again on Casio Site ?

 

 

Killer ,,,,ehmmmm ok z you win great thank you

I am sorry....best is to download the px5s tipps document

you can save the channels for each stage setting by itself ...stage setting edit. Stage..Zone Edit then Midi Edit ,there select Zone1. To 4 and set your midi channels midi out in and so on....well i am not shure for channels 5. To 16

please how do i upload a MP3 inside a post ?

From the technical sheet ...the pianos in the px are great and for it bucks it is a top masterkeyboard. Of course this is only a discussion about the possibilty of the px and i really love it more then this it is a challenge to programm top sounds on it and the hex section is a playground. Guitars are the most difficult instrument to reproduce for the resonance chancing over time and the different ways to play it

 

 

Immagine we could play Bolder Samples from the Use Stick or a external SSD ,,Yeahhh 

hahaha you are talking about a 700MB sample Lib ,,the PX5 has a 128 MB sample space for all Waves....what makes me cry because a 1GB chip cost less then 3 Euro and i really dont understand why casio did this...having a more and  better samples......does not cost so much ....

and would made the PX5S a Killer Machine so now please dont tell me it is a Stage Piano the latest Kurzweil StagePiano is playing with 19GB

of Flash Samples ...

 

 

 

 

If i programm a stage setting and i modify a tone i have to save it for future use but here comes the problem if i dont have a list or i remember my user tones i will overwrite other tones ,,,the px5 is asking always are you shure to overwrite but i can,t see wich sound is actually on the place i am savinh the new one,

,,,is it possible to add a display message showing the actually tone on place

Also check Usb out and in px5s settings to be on

Try with phrase or arpeggio and set one zone to the key

Not really but if you like the tones you create to use them i another stage you have to save them on your px5 because if you loose a stage for example writing a new stage over a old one you also have lost the tones inside the old stage ..

cool very nice warm and full ,,,,hope to see it soon for download

If you recall a stage setting all the tones are inside of coursw if. You change a setup and there was a tone inside stored as ztl then you needvto have this tone on place

Try to dissable the eq and. Compressor and listen again then dissable the effects listen again to find out if the raw samples is the high pitch producer or if it comes from other side.

Try to dissable the eq and. Compressor and listen again then dissable the effects listen again to find out if the raw samples is the high pitch producer or if it comes from other side.

Because I like to see if my button problem is hardware related I need older firmware to be sure the latest update is not the reason,,,please mike can you link me to older download ?

Because I like to see if my button problem is hardware related I need older firmware to be sure the latest update is not the reason,,,please mike can you link me to older download ?