piattica

Thank you Joe I need a more specific answer; I do not know how to get the result with MIDI

Quote

 

Once more a request of help about this topic.

I have:

 PX5s linked with MIDI expander

 zone 1 MIDI channel 1 to play Piano 

 zone 2 MIDI channel 2 to play Organ 

using the same slider I want select zone 1 or zone 2

to play or Piano or Organ.

How to do it?

I found a stage setting (midi-4-channel-master)that explain how to switch on\off a zone with a slider but I need to switch 2 zones in the same time with a unique slider

The Behringer FCB1010 is probably the best solution for gigging. Dual expression pedals so you can control 2 zones, up and down switches to change patches plus 10 filly programmable switches that can do anything from pull up favorite stage settings to play notes or even chords.

It should be interesting for all FCB1010 to share the configuration file to control PX5S volume

Thanks Choppin

I solved connecting by MIDI the PX5S to a PCR800 controller that has merge function 

 ---------       ---------       ---------- 

|  px5s   |---->| PCR800  |---->| expander |

 ---------       ---------       ---------- 

It is a pity that PX5S do not have a internal merge of MIDI.

Up.. just to remind Casio that we expect at least a feedback to know whether this issue can be solved by a FW update or not...

+1

Thanks Pianomax.

I think it could be a nice improvement for new firmware

Hi from Italy

I connected an expander to MIDI OUT of PX5S.

To increase the available MIDI controllers, I thought to connect a MIDI controller keybord to MIDI IN of PX5S.

I would like to play expander either from external MIDI keyboard either from PX5S: basically I would like to have a MIDI MERGE function.

Is it possible?

How I have to configure PX5S?

Merry Christmas and happy 2015.

+1!

+2

I had a similar problem before a concert. I was playing a VMachine and here was a lot of noise from output.

The man at mixer told me that the cause is because the "zero" level of USB unite is not referred to ground; he conneced the outer metal shell of USB plug to the ground of a socket with a temporary cable and the noise disappeared.

He told me: it is only to convince you, the right solution is to buy a power supply with zero referrable to ground.

Ciao Mau Van

where can we find this piece of software (PX5S Converter Software)?

I bought a second hand Yamaha TG33 module.

I attached here TG33 MIDI implementation chart.

Could you explain me how to set PX5S controllers to change patches and banks on TG33 in real time moving sliders or knobs of PX5S?

Thanks :-)

Ciao.

Who can share a patch like DX7 Whitney Houston's electric piano?

See https://www.youtube.com/watch?v=t1xEJccP6Zw

Thank you in advance.

Seriously?

Seriously?

 

I agree completely with Mike.

I believe Casio is giving a big support to us.

+1

how can I have for example patch 1.1 with audio ext.input on and patch 1.2 with audio external input off?

Up

Dear friends

i would like to know if it is possible to set to zero the external input volume for a particular stage setting.

My tipical use of PX5S is

• as stage piano (tone generator: ON, midi output: OFF)
• as MIDI controller of external module (tone generator: OFF, midi output: ON)

As my external modules produce a little continous white noise when module is stand by, when I use PX5S as stage piano I would like to zero the external input volume of PX5S  to avoid noise overlapped with PX5S. Is it possible?

One possible workaround is to assign external input volume to a slider/knob for stage settings used as stage piano: it works but I lose a slider/knob...

very clear

thanks a lot

when a stage setting is based on a user tone

to load stage setting you must load tone before?

 the link between them is automatic?

link seems dead

Dear friends

I would like to change patches of an expander connected to PX5S by MIDI;

is it possible set up a PX5S slider to send program change?

Good job

Acceleration of rotary is too high imho

I am wondering if it is possible to connect directly to PX5S a Nano Kontrol of Korg.

It would be useful to extend the PX5S master capability and to control PX5S organ presets.

Ciao.

Paolo

Can PX5S play MP3 files?