Bruno888

Hello! I have a Casio cdp130, and im willing to buy a roland dp10 damper pedal, mostly because of its non slipp rubber plate. But im not sure if the polarity of the pedal is compatible with the piano. Is it compatible?

Thank you! 
But i have a problem: when i save these files into the px5s, it only allows me to save them into the piano sounds bank. I mean, i cannot save them into the organ bank. Why?

Hello! Is there any way to make zone 1 come out by line out R and zone 2 by line out L, other than to pan each zone? I want to do this when playing live, so the sound engineer can easily manipulate the volume of each zone separately. 
Thanks!  

That was it!!
I tried it out and everything worked perfectly. Thank you!

Mmm, no, it isnt an hex layer.
Well, i cant do a video right now, but here is my setup:

CASIO CTK481 is set on channel 2.

px-5s
SYSTEM SETTINGS > MIDI
LOCAL CONTROL > ON
HIGH RESO OUT > ON

DEVICE ID > ALL
BASIC CH > 01
MIDI OUT SELECT > KEY
MIDI IN ENABLE > ON
SYNC MODE > MASTER
RX FILTER > ALL OFF BUT PITCH BEND

Now for the zone setting:
 

EDIT >STAGE SETTING > ZONE EDIT (2)

-MIXER > ZONE ENABLE ON

-CONTROLLER EDIT > ALL ENABLED
 

-MIDI EDIT > EXTERNAL OUT CH > 02
GENERATOR OUT > OFF (in order to play a tone on the privia and a different tone on the CTK)
MIDI OUT > ON
USB OUT > ON

PROG BANK OUT > OFF

SLIDER 3 TARGET 1: EXPRESSION
TARGET 2:NO ASSIGN 

Yeah, i set the CTK to channel 2, and it is controlling the tone i selected for zone 2. I hear it. 
Maybe it has something to do with the midi implementation chart of the CTK 481? 

http://support.casio.com/storage/en/manual/pdf/EN/008/CTK481_EN.pdf

Joe Muscara, the sliders are on the PX-5s, not on the CTK 481.
You are correct, BradMZ, thats the problem. Of course, when i use the  PX-5s alone to control zone 2, everything works well. 
But for some reason taht i dont understand, i cannot control zone 2 with the CTK481 and control its parameters via sliders at the same time. It seems the sliders can control a zone only if that zone is using the internal sound generator. Is there a way to control zone 2 with  the CTK and the sliders??
Besides, i dont get why i can still manipulate the DSP parameters assigned to zone 2 whit the sliders, but not another parameter. 

I have my casio px 5s connected to an old casio ctk-481 via midi in; im using the old casio to control the sounds of the casio privia px 5s, zone 1 is assigned to the keybard internal sound generator, and zone 2 is controlled by the casio ctk481. Everything its going well, but then i noticed that i cant control the sound of zone 2 with the sliders. Specifically, slider 3 is assigned to control expression for that zone, but it isnt controlling anything. 
But then when i select a different stage seting, i can control the fast rate and vibrato for the zone 2 with the sliders, without changing anything, apparently. Whats going on, why i can use the sliders in one case and not in the other one???? 

It seems that the sliders work in the second case because they are controlling a DSP parameter, wich can be controlled this way. As expression isnt a dsp parameter, it cannot be controlled that way. 
That said, i still dont understand why it happens, why the dsp parameter can be controlled and expression cannot. 
Is there a way to control expression of zone 2 (external device) with the sliders??? Do i need another midi cable, to connect the privia midi out to the old casio midi in, in order to do that??