marecki76
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by marecki76
-
-
6 minutes ago, Rick Sterling said:
These are good diagnostics. Can you use the on board Audio Recorder and record the noise? If you can record the noise then the noise is being generated early in the audio chain, possibly in the DAC. If you can not record the noise then it is being generated in the audio output amplifier sections.
How would you characterize the noise? White noise or hum?
If I were you I would get the keyboard back to your dealer as soon as possible with as much documentation of the issue as you can create.
The only background noise I had on my MX500 came from an external audio source. I fixed that easily. ;-)
This is white noise "constant, not variable" - independent of volume knob level - constantly audible.
Thanks
-
This is not a problem with the keyboard.
The quality is good. It sounds like preamplifier background noise. -
Thank you, Rick.
Yes, I mean background noise.
I did factory reset.
I turn "Audio volume" in the rear panel to miniumum - > background noise audible.
I adjust N. Gate Tresh to value 127 -> background noise audible.
The noise is not coming from external audio input.
Background noise can be heard all the time...
I have a guarantee, so I can send for repair.
Did anyone hear this background noise in the instrument?
-
Hardly I heard this silent noise.
Quiet noise is the same if volume is adjusted between min or max.Did anyone hear this quiet noise?
Or is it a problem with my MZX?Looking forwards to reading your opinions.
-
I'm working on this sound.
I have a problem with the "click" in samples.
In a Software Instrument (My Organ) the sample sounds well (no click).I am waiting for help in this matter......
When I'm done with these problems, I upload the sample.For now, the samples are too large for the MZ-X.
-
I am very grateful to you.
interesting problem
-
Yes, wave is 44.1 kHz, PCM, 16bit. In the Wavosaur (and other software) everything is ok. I have built a simple split (only one sample, e.g. F4) in Sample Manager.
In the instrument can be heard "click" during each loop.
-
Thanks Brad. I try to crossfade, new loop points and nothing works. In the computer headphones loop sounds good. In the device can hear a "click" in each loop.
Can I ask an example?
e.g wav? -
I have got a problem. The sample is looped correctly. I checked it in Wavosaur and other programs. After taking "new_tone" (Melody) in the Sample Manager then I hear "click" in the loop on my device.. I had tested Various samples with different loops. I always have such effect. What am I doing wrong?
Firmware 1.4, Sample Manager 1.1.0
I have attached sample for F4 sound.
-
Ok.
I'm just beginning with MZ-X500. Good instrument. Lots of fun.
-
The file moved to the section.
Samples are loops. I can not configure the Sample Manager that sounded good (start - loop - end). -
Hello,
Since Friday I have a MZ-X500.
With free samples (Burea Chapel) available at: http://www.familjenpalo.se/vpo/download (The license allows the processing of samples).
I created Hex Layer tone. BureaChpl v1Layer 1 - PedGedackt8 (C2-C5)
Layer 2 - Gedackt8
Layer 3 - Salicional8
Layer 4 - VoixCeleste8
Layer 5 - Rorflojt4
Layer 6 - Principal2
I do not know how to make better loop in Sample Manager.
marecki76
Caution! Wait a few minutes to load samples.
-
I do not have the MZ-X500. You can demonstrate samples?
I am looking for natural (similar) sound pipes 8,16,4 (characteristic sound).
-
Hello,
Seeking a sound (samples), chapel and church organ with MZ-X500.
I can not find on the internet.
Maybe someone will record a short demo? I will be grateful.Please post a link.
I like the sounds of chapel and church organ, as for me it is a criterion for the choice of instrument.
I was looking for MZ-X500 in my area. I've been in several stores. I found only PX-5S.
Very good piano sound. Unfortunately, the church organ poor.Greetings from Poland,
Marecki
Quiet noise in the headphones and speakers.
in MZ-X500 / MZ-X300
Posted · Edited by marecki76
I use the Audio Recorder - wav file is perfect ... (no noise). Need to check most the electric sockets in the home (Connect - Disconnect the instrument).
.
.
Tested .. always noise
.
Dealer suggested replacement of the instrument(shipping for free).