Search the Community
Showing results for tags 'Tone'.
-
Hello there I am recording my new stuff with Privia and doing it first time using MIDI recording section. Since I have no satisfactory VSTs on my PC, I'd rather use Privia's interface and then work on it further. I like to work on some tones but later I often change them, when all paths and items are recorded and put together to change overall sound and blend. So my questio is: Is there a way to CHANGE TONE OF ALREADY RECORDED 'solo track' in Privia's MIDI interface? It would be helpful as hell. I even hoped for changing in 'on fly' to hear how the tone changes the piece. But I cannot find answer in internet or manual :/ Thanks in advance
-
Hi there! Confession up front - I'm a MIDI newbie. I'm trying to get my iPad (Onsong app) to fire off MIDI commands to my PX-560M to change the following based upon the song I pull up: Tone (Upper/Lower 1&2) Split Point Levels I know the MIDI connection is working fine but the tone change command doesn't seem to do anything to the keyboard. Here's the steps that lead to the problem: 1. Set Onsong to Listen for MIDI commands 2. Change tone on keyboard --> Corresponding command shows up in Onsong (so it definitely receives ok) 3. Turn off MIDI "Listen" in order to do a Test 4. Manually change Tone to something elese on keyboard 5. Click "Test" in Onsong (which fires the same command back to the keyboard) --> Result: Nothing happens. When I do the same process, but with Playing a note as the command, the test is successful and Onsong is able to play the note back through the keyboard. So I know the communication is fine. That means the problem must be around the other commands that don't seem to work when Onsong fires them off to the keyboard. Does the PX-560M support what I'm trying to do (in theory)? Are there any troubleshooting tools on the PX-560M to see what MIDI messages it's receiving? Am I missing some setting or something to allow these settings to be changed remotely via MIDI? Thanks for any help!
-
Hi, Is it possible to access and edit component layers of a quasi-layered "Tone" or "PCM Melody"? For example : Internal tone/sound P:320 NEW AGE - this is a layered sound comprised of a bell-like sound combined with a synth string-like pad. How do you access the bell sound and string pad separately ? For example : Can I switch the bell sound with another sound choice to layer in with the existing Pad and vice versa? Or, how would you create a multi-layered tone using existing tones? I realize this can be done as a performance, but since this layering is used in factory tones, I'm curious as to how deep you can burrow into a factory tone. Pressing the edit button while in Tone mode only seems to offer editing access to Attack, Release, Cutoff and other effects - not the actual ability to select different sounds for combing/editing into a new layered Tone. Once again, no luck with the manual :-(( Thanks kindly for any tips. Cheers, Gee Won
- 14 replies
-
- tone
- pcm melody
-
(and 1 more)
Tagged with:
-
-
-
I have Ableton Live configured to send MIDI to my PX-560 for playback. However, I can't figure out where in the PX-560 is the mapping between what tones are assigned to what MIDI channel. For example, when Ableton sends MIDI to channel 1, the PX-560 plays Grand Piano. Channel 2 plays percussion. Channel 3 plays Warm Pad. I've looked at the "MIDI Channel Assignments" table at the end of the User Manual but I'm not seeing the answer. What am I missing?
- 4 replies
-
- midi
- midi channel
-
(and 2 more)
Tagged with:
-
I was building a performance containing tone 288 and two others. Tone 288 is a VA tone with a drop and rise at the end which continuous as long as the keys are hold. I like the first segment of that tone and tried to cut the rest of by editing it and make the release long enough before that typical part comes to bit and have the release draw it short how I wanted it. But while editing that tone the release holds good on +00 to 64+ until, trying to get it short while setting value's from -00 to -64 it keeps the full play from beginning to the end of sample where I would expect the tone to be just long enough as the release to be. Nothing happens the value's only seem to work from +00 up to 64+. Is that how far editing a tone gets to be or is there a fault at work. I do have a work around containing arpeggio and step sequencer but it makes that tone monophonic which I don't want.
-
Version 1.0.1
294 downloads
Here is new tone MR Funk wah (load to Hex Layer) and registration for all controller. Modulation wheel is in use for Distortion, Knob1 for Dealay, Knob2 for Reverb, Knob3 for Amp and Expression pelad for Wah. This is a very Rock setting... I'd be glad to hear did you rock with it...? I love this odd px-560 ! In this setup I used MR Funk wah in Upper1 and Syn-Bass+Ld in Upper2. First load the tone to Hexlayer and save it and then registration and save it to bank+area.- 1 review
-
- registration
- tone
-
(and 3 more)
Tagged with:
-
-
-
-
-
-
-
-
-
-
- 1
-
- piano
- registration
-
(and 2 more)
Tagged with:
-
-
- registration
- px-560m
-
(and 2 more)
Tagged with:
-
-
-
-
- px-560
- registration
-
(and 3 more)
Tagged with:
-
Hi, After several months my PX-160 is having the strings tone as default when I turn it on. How can I set it back to be the Grand Piano? Thanks
-
Version 1.0.0
102 downloads
1 = Registration for LADYHAWKE soundtrack MAIN theme 2 = Registration for LADYHAWKE soundtrack SOFT theme BY Andrew Powell (The Alan Parsons Project) Load Registrations onto adjacent slots of the same Bank (1+2 or 3+4 for instance) These Registrations are done by Preset Tones Knob 1 is configured as mixer between Upper Tones Knob 2 is configured as mixer between Lower Tones Rhythms included with Full Range Chord See more details in the attachment, so as to find out how all Real Time Controllers affect Tones-
- 1
-
- soundtrack
- px-560
-
(and 2 more)
Tagged with:
-
-
PX-560M UPRIGHT View File Tuned Upright Group Name: Hex Layer Load Upright Registration in empty location Load Upright Tone in Upper 1 See details in the attachment Submitter SimoneCarini Submitted 06/08/2016 Category Community Created Files