Search the Community
Showing results for tags 'issue'.
-
Hey everyone, was hoping you could help me with an issue I'm having. Recently bought the PX-400R and am having great difficulty finding ANY working USB-MIDI drivers for 64bit windows 11. I've even gone so far as to modify existing Roland drivers to no avail. Everything made by Casio is either 32bit, and refuses to install outright, or is too old to be compatible (even when using compatibility mode). Is anyone aware of a fix for this? I considered switching to standard 5 pin MIDI, though I'm unsure if even this would work natively, and would prefer to use USB-MIDI if possible, as I shelled out a decent chunk of change for an ultra-long cable for studio routing. Any help would be GREATLY appreciated, thanks!
-
Hi Everyone! Its been about 4 months and my keyboard has been giving me problems. Specifically, the "B" note of the keyboard is sounding rather shrill and that's getting worse. I'm sure something's wrong with the speakers. Please help. Thanks in advance! Below attached is the sound recording that describes the issue. Voice Capture 011.m4a
-
Hey everyone, I'm having some MIDI issues with the CDP-130. I am trying to send MIDI information from Ableton Live into the CDP-130. I have the keyboard set on the "strings" setting, however the "Grand Piano" sound is what is recorded in Ableton. The MIDI notes are reaching the keyboard properly, but the wrong sound is coming out. Does anyone know what I am doing wrong? Thanks for any and all help,
-
I have CTK-810 IN Keyboard, i am unable to connect it to my laptop. I tried installing drivers from the official website but as I have windows 10 it is not supporting anymore. No USB Devises connected is showing up there. I have no previous experience to connect laptop with a keyboard. Please do help me out.
-
Recently I created a registration with Piano and Alto-Sax to play the Pink Panther - perfect sound ... until yesterday: When I turned on the PX-650 the sax sounded as if it was far away, quite silent, long delay between key hit and sound (ca. 200ms). First I searched in the reverb configuration ... was set to Hall 3 like before. Playing around with the individual values changed things a litte but not really. Whatever I did ... the sax sounded strange. The more I tried (changed each value and then setting it back to the original value) ... things got worse ... the sax became more and more quiet. Then ... the keyboard froze totally: No reaction of the touch screen, non of the buttons worked anymore, neither the wheels or knobs ... except power-off. After power-on the same quiet sax sound again. I wondered how to debug such a phenomena. Today I wanted to debug the whole thing the hard way ... first I saved all settings on USB. Then I wanted to try a factory reset, save again and compare the files. Didn´t get that far ... simply because the sax sound was perfect again! So this time I won´t find the issue ... but let me ask to questions: 1. Any idea about the phenomena described above and how I could have fixed this faster? 2. Great help would be PC-tool to read, compare and analyze the ZRA-files! Or at least create a TXT or XML-file or whatever from it ... come on guys ... ;-) ... will help everybody ... :-)
- 1 reply
-
- crash
- zra-format
-
(and 1 more)
Tagged with:
-
When I use split mode with Hex Layer 039 GTR'Bass (Lower 1) and Piano (Upper 1) there is a sporadic noisy sound when hitting a key hard - sound is clearly generated by electronic, undistorted, sinoid, about 500-800Hz. The normal bass guitar sound is not generated as long as the key is hit. Disappears with the next key is hit. Occurs sporadically about every 10th-30th key pressed. Firmware Update V1.14 has been loaded (issue was there with Version V1.0 as well). Example file attached. Any ideas how to fix this? Issue_Hex_Layer_Bass_Guitar_in_split_mode.WAV
- 5 replies
-
- split mode
- hex layer
-
(and 2 more)
Tagged with:
-
Hi, folks. My first post is a problem I'm having with my keyboard (typical, right?) It's a Casio WK-500. I've had it for 5 years or more and never had an issue. I turned it on the other day, keyed a chord and it sounded like the sustain pedal is continuously pressed (which it wasn't). It's very noticeable if I change the tone to something other than piano such as strings, organ, etc. Pressing the pedal has no impact. I unplugged the peal and still the same issue. The only way to make the sustain stop is to go into the settings and change the pedal setting to something other than sustain. After that the pedal has no impact at all. I've tested the pedal in a different keyboard and it works. Any ideas? I did get a response from Casio (kind of surprised that I did actually hear from them) but they asked me the old "did you try turning it off and back on again." (Which btw doesn't work.) Thanks for any help, Scott
-
Hello guys, I am having a very bad time with my Privia PX-5S, I bought it in December 31st, 2014, and for the first time I'm experiencing some issues regarding the volume knob, it isn't work properly, it gives the same volume when turning up or down, and there is a point where should be volume 0 where you can appreciate a noise, pretty much like the two states devices (a button) and instead of giving an especific amount of resistance it's giving just "On" and "Off". I don't know if this is new for you or it is a common situation. I live in Mexico, and the purchase was in the US, what do you recommend me? Please check the video.... help me ='( By the way this issue seems to be like a shortcut, sometimes happens and after an specific amount of time it solves by itself but in the end it happens again. Thank you in advance Tony Martinez IMG_4042.MOV
-
Hello. Ive bought a brand new casio px-5s(we) model not long ago, and its great. But i have an issue: when i record phrase for egz. in bass. i press play phrase, and everything looks good, BUT when im editing song, and add the phrase i recorded before (in egz. bass), the phrase plays in piano only! no matter if i used drums/bass/ electric piano/ etc. while recording.. when song, it ALLWAYS plays in piano ONLY! i dont really know what to do (i red all the manual and tried all i could think off)... any ideas why? and how to fix it? help would be REALLY appreciated, thanks! p.s. that thing in sys rec setting is on (dont remember what its called :/)