Jump to content

Search the Community

Showing results for tags 'xw-p1'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • General Casio Discussion
    • General Casio Discussion
    • Share Your Casio Music Here!
  • Casiotone CT-S and LK-S Series
    • General CT-S and LK-S Discussion
    • CT-S1-76 and CT-S1
    • CT-S1000V and CT-S500
  • CT-X Series
    • General CT-X Discussion
    • CT-X700 / CT-X800
    • CT-X3000 / CT-X5000
  • Privia Pro Stage Pianos
    • Privia Pro PX-5S
    • PX-560M
    • PX-3S
  • Privia, CDP and CGP Digital Pianos
    • General Privia Discussion
    • Privia PX-S7000 / PX-S6000 / PX-S5000
    • Privia PX-S Series
    • PX-360 and CGP-700
    • Casio CDP Series
    • Privia x50 x60 Series
    • Privia x30 Series
  • Celviano and Privia Console Pianos
    • Celviano Grand Hybrid Series
    • Celviano AP-750 / AP-550 / AP-S450
    • Celviano AP-x70 / Privia PX-x70
    • Celviano AP-x50, x60 / Privia PX-x50, x60 series
    • Celviano AP-x20 Series
  • XW Series
    • General XW Series Discussion
    • XW-Series and the iPad
    • XW Sequencing
    • XW-P1 Specific
    • XW-G1 Specific
    • XW Downloads Discussion
    • XW-PD1
  • MZ-X Series
    • MZ-X500 / MZ-X300
  • CTK / WK / LK Portable Keyboards
    • General CTK / WK / LK Discussion
    • WK-7500/7600 - CTK-7000/7200
    • WK-6500/6600 - CTK-6000/6200
    • Other CTK/WK Models
    • LK-series
  • Classic Casio
    • Classic Casio Discussion
    • CZ Series

Categories

  • CASIO Official Files
    • Privia PX-5S
    • Privia PX-560
    • PX-S3000
    • MZ-X
    • XW-Synths
  • Community Created Files
    • Privia PX-5S
    • XW-Synths
    • Privia PX-560
    • CT-S500 / CT-S1000V
    • PX-S3000
    • Rhythms
    • CT-X
    • MZ-X300 / MZ-X500
    • CTK / WK
    • Other Casio Products

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. I recorded and mixed this on a Raspberry Pi 4B single board computer using MusE 4.0pre3 DAW software. All instruments are from the CASIO XW-P1. It was all MIDI sequenced and recorded one part at a time to the DAW. The video is a capture from the Rockband 3 video game, I did the best I could to sync up my version of the audio to the clip. The female vocal was produced by cloud based "Vocaloid" software at www.sinsy.jp. I used Musescore to produce the XML music score for Sinsy. It's not quite right but it's better than me trying to pitch shift my voice! LOL
  2. Hello friends, I'd like to check with you if you have any ideas to improve the 60's electric piano of XW-P1, which is the one that comes more closer to a Wurlitzer electric piano. Do you have any ideas, or a sound of your own that you can share? Take care!!
  3. What Pedals work with the XW-seriesCasio SP-20 Casio SP-3R Pedals from Kurzweil and Korg also work as well as the switchable M-Audio, Roland and Yamaha will not. Can I used the Solo Synth and Hex Layers, or Drawbar organs at the same timeNo, only one of them can be used at a time on Zone 1.
  4. since I've been stuck in the house.....along with the rest of the planet....I've used the time to hook up an I Pad to my XW-P1....and it's been a blast..... so many great programs available....and an infinite number of way to get the sounds you want....or never even know you could get...my neighbors are definitely rooting for me to get Covid-19, just so I'll stop playing for a couple of weeks....anyway, What I don't like about the XW-P1?? I used to think it made me look fat....but, now....after watching this video....I'm convinced it's my fat that giving me that look....not the keyboard...😕 anyway, In this video, I'm using the I Pad, but....I'm actually not using the lightening kit ...(..No, I didn't eat it...).. just using Garage Band directly for effects...while I attempt to catch a groove with the XW-P1's step sequencer...and play a few chords on my Yamaha elec piano... Somehow, this ended up being a smooth jazz cover of Eleanor Rigby, with a Latin twist.....it's a work in progress.....just 80 seconds long.... I dunno if it'll be used at the beginning or the end of the tune....whatta ya think?? ....worth pursuing?? Stay healthy, everybody! eleanor4.mp4
  5. Version 1.11 is the latest firmware for the XW-P1 and XW-G1. The update process requires your computer. The firmware and instructions are located here: http://support.casio.com/en/support/download.php?cid=008&pid=20 Here are some things to remember. Do not interrupt the firmware update in any way. Powering off the XW during the process will damage it permanently. If you are worried about the power going out, putting batteries in your XW is a good precaution. Disable any virus protection, this can interfere with the Updater Do not run other applications on your computer while doing the update. Launch the Update tool BEFORE and put your XW in Update mode BEFORE connecting the XW to the computer If the update seems to stop during the process DO NOT power off the XW. Please wait at least 10 minutes before doing the following Do not touch the XW Close the Updater application on your computer Disconnect the USB cable Restart the Updater Application. Reconnect the XW keyboard to the computer The Updater should resume. When complete your XW will restart automatically
  6. Does somebody knows which tone preset does Kristian Terzić use in this YouTube video? https://www.youtube.com/watch?time_continue=24&v=_01GTpr6RCg Starting at 2:07... Regards, Frank
  7. So I recently picked up the XW-P1 used from Guitar Center. The first thing I have noticed is that the Eb, E, F, and F# below middle C are really out of tune in the StreoGrPiano factory tone. Is this normal? I have reset it to factory settings and it is still the same. Is it just a poor sample? Is there a way I can fine tune each note?
  8. Piano ALI.ZLT Fiz usando o hex layer, Slider 1 - é volume do GndPiano L1 Slider 2 - é o volume do GndPinano R2 Slider 3 - controla um strings coloquei pra fazer fundo.
  9. HI: I've decided to create this post to upload my music. And share it with you. Thank you. Mediodía 1. CASIO XW-P1 ***************************************************************************************************************************************************************** Noche II 1. CASIO XW-P1 2. KORG electribe MX <EMX-1SD>
  10. Hi everyone i have casio XW-P1, is there any chance to put new sounds in it? if it possible, how can i do that?
  11. The awesomeness of the P1 fully on display. Some other stuff going on here but the P1 is doing the heavy lifting. Would love to hear your thoughts. Texturals
  12. Granted this is mostly Roland SE-02, but it's the XW-P1 Hex pads that really make this piece what it is. Titled "Intro" simply because it feels like it's an introduction to something. I appreciate you all clicking the link, giving it a listen, and letting me know what you think either here or on my Soundcloud page. Thanks! Intro
  13. Hi everyone! I made three different tones, to intro, first and second chorus to this song. Enjoy.. ENJOY1ST.ZLT ENJOY2ND.ZLT ENJOYHEX.ZLT
  14. Here, the Oxygene 4 patch, ( Jean Michel Jarre ) that i which I built using a programming principle. Enjoy and regards Oxygene.ZPF
  15. File Name: Casio XW-P1 Cakewalk Sonar Instrument Definition File File Submitter: tnt2gamer File Submitted: 02 Nov 2013 File Category: XW-P1 This is a modified Cakewalk Sonar Instrument Definition File for the Casio XW-P1. It will allow you to access all of the sounds on the XW-P1 from inside of Sonar, Cakewalk, Reaper, or any other program that uses the .INS instrument definition file format. In this revision I added bank 100 (User PCM Melody) and bank 125 (User Drums) to Mike Martin's V 0.5 Instrument Definition File. Now we can access 100 more user tones (piano, strings/brass, guitar/bass, synth and various) and 10 user drum kits. Click here to download this file
  16. hi everybody i'm a new owner of the xw-p1. i followed the instructions to get the xw-p1 control logic x via usb. I succeeded once, and then cannot work it out again. can anybody help me pls. Hicham
  17. Hello everyone. My new song is here. (All of keyboard parts recorded by Casio XW-P1)
  18. How to Simulate a Duophonic Synth on the XW-P1 (and maybe the XW-G1 too!) After decades of defaulting to polyphony, I've finally become fascinated with mono synths and the awesome Solo Synth of my XW-P1. As a result, I've also found myself interested in the duophonic play style of synths like the ARP Odyssey and Moog's Sub 37. It got me to thinking if there was a way to simulate a duophonic synth on the XW-P1 (and the XW-G1) to support that kind of sound. After a week or so of experimenting, I think I came up with a suitable way to pull it off. It won't support the full spectrum of those synths, but it does give me the ability to, for instance, play or hold single notes on one part of the keyboard, and play or hold the Solo Synth on the other. Since you obviously can't have two Solo Synths going on at the same time, the next best thing is to pair up the Solo Synth with a PCM synth tone/tones, split them using Zones, and have them share the same filter. Fortunately others like AlenK, Chas, BradMZ and others have deciphered all the elements I need to do this. The XW-P1 Companion, in particular, was really helpful to me. Also thanks to Clark Denham over on the Facebook Group who said something to me that clicked and kept me from giving up. The XW-P1 Solo Synth app for iPad was also invaluable for the fine tuning I needed to do. Once I accepted that I was going to have to work the Solo Synth and PCM tones, I set out on finding some Solo Synth tones that I liked, ones that were reminiscent of the sound I was going for. I chose a handful of them, then set out to find some PCM tones that sounded similar. I decided that I was going to need a combination of PCM tones to sound right side-by-side with a Solo Synth. In the end, I found a good match between XW LeadSyn 2, and the combination of PCM tones Slow SawLead and Seq.Square. So I put XW LeadSyn 2 in Zone 1 (so that I could later apply its filter to the other Zones), Slow SawLead in Zone 2 and Seq.Square in Zone 3. I assigned Zone 1 keys as the Lower Key Split (C- to B2) and Zones 2 and 3 both (layered) as the Upper Key Split (C3 - G9). The first test was to play Lower and Upper to hear how it sounded, and this is where the first lightbulb went off. What I really wanted to do was play the Solo Synth as the Lead, and let the PCM tones either do bass duty or just be the lower held note. So I switched my key arrangement and that was much better. So Zone 1 as Upper (C3 - G9) and Zones 2 and 3 both as Lower (C- to B2). Much better. So I played B2 and C3 (the split point) to hear how natural the progression was, but found that it sounded like it jumped an octave. So I set Zone 1 with a +1 Octave Shift, and the split matched quite naturally. The tones were close, but it required some fine tuning of the Solo Synth sound and envelope to bring it into line with the layered PCM tones. This is where the iPad app came in really handy, and with a little tweaking, I had a custom Solo Synth tone that sounded pretty much just like Slow SawLead+Seq.Square. (note: I save a lot as I go along, and even save temporary variations in case tweaking goes too far and it becomes difficult to get back. So it really helps to use that Write function on both Performance and Tone so that you can audition variations and finally choose the best combined settings) The next step is some housekeeping to help keep your sanity later on. Basically, you want to normalize the Performance. Go through the Volume/Level settings and match them, match the Reverb settings, do everything you can to get those two sides of the split to match as closely as possible. The goal is a set of keys that sounds like a single tone on a monosynth (on which you can play two notes at a time!). What comes next can be as small or big as you want. Remember that I put the Solo Synth on Zone 1 specifically so that I could apply effects and behavior that was available to the PCM tones as well (see posts like Chas's Filter All and XW surprises). For what I was working on, I wanted an automated LFO Sweep running in a cycle for all the notes. I went back to my SoloSynth tone, set (and saved!) the Cutoff and Resonance of the LPF to where I had a nice medium "growl", went to LFO and set LFO1 and LFO2, made a Virtual Controller for LFO2 routed to the Cutoff of the Filter, and added a Flanger to the DSP. Tweaked as I went along and got the sound I was looking for. Resaved the Tone. Went back to the Performance, into Zone, and set the PCM tones on Zones 2 and 3 to DSP Line "On" so that they could tap into the same effect. Tested it out across the keyboard, probably did some more tweaking and came up with a single sound I really liked. Saved the Performance. The other big lightbulb was serendipitous. I started messing with the Sequencers for the Performance, knowing that I'd probably want to assign Arpeggio to one Zone (only) and Phrase/Key Play to the other. At first I was thinking that Arpeggio would be great for an automated bassline on the Lower Split. But I was messing with the Phrase Recorder and assigned it to the Lower half (again, Zones 2 and 3). I recorded a long single C note on the Phrase Recorder and saved it. When I tried it out, I realized I had just made the Lower half a monosynth! Keep in mind that with the PCM tones in the lower half, I could still play them as poly. I would just have to be careful to play only one note at a time. But with a single note Phrase/Key Play assigned to the Lower Split, I can only play one note at a time. That, combined with the Zone 1 Solo Synth on the Upper Split gives me the "two-note monophonic" synth I was looking for. Essentially, a Pseudo Duo Synth. I saved my custom Key Play sequence, set it to be limited to the Lower Zone keys (C- to B2), set Key Play default as "On", and saved my completed Program (I even named my Program "PseuDual"). I still have some more experimenting I want to do with envelopes, and switching my Upper/Lower assignments to see how that sounds. And since I really have very little hands-on experience with actual Duophonic synths (Sub 37 coming soon), I don't know what I might be missing. Feedback from others here would be welcome and I hope that someone else will find this useful and possibly take it further. I'm not sure if I upload just the Program file if that will include the Tone and other elements, so in the next day or so I'll upload all of the associated files. I'll also try to do a video or audio demo of the results (all of this was for a specific song I've been working on). I just had some time this evening and wanted to make sure I got the basic steps down in writing before they started to drift out of my mind.
  19. Well, I loaded up the data editor, but it looks to work differently than the PX-5S. Either that or I have a problem. The keyboard is connected via USB. But when I go to the "transfer" section, the right pane doesn't view performances, solo synth patches, etc. that are already on the keyboard. It shows a blank list. Already tried closing / reopening the data editor, powering the keyboard off and on again, etc. Am I missing anything else? Or does the XW-P1 data editor work differently from that of the PX-5S?
  20. Is there any way to configure the XW-P1 so that I may switch between performance presets using an unlatched footswitch or a sustain pedal? Changing the preset via the + or - button is a little difficult while playing with both hands. I've checked the main settings in the P1 but I can't find a way to do so. Thank you!
  21. Hello everyone!, This is my first post to this group, and although I read thru the FAQ and AlenK's XW-P1 companion I still can't find the answer to my question. The XW-p1 has MIDI settings for zones and and parts and a general MIDI channel setting, but I want to be able to communicate with the XW-P1 thru a global channel to at least to select a patch. I have found that if I set the general midi channel to 3 (for example) the instrument will still only respond to a global command like volume (CC 07) thru MIDI ch1. I have many keyboards that I need to control from my foot pedal (FCB1010) and the other keyboards I can simply set the midi channel and send patch changes and CC messages with no problem. Now the WX-P1 is very powerful, and I expect to use the zone settable midi channels to parallel keyboards and program user patches accordingly. But I need to be able to access these patches thru one settable channel (other than CH1). So that being said, what does the basic MIDI channel setting do? The Manual says NRPN and other midi messages, but can I change patches thru the MIDI channel set here? It seems that unless I use the default channels programmed into the factory presets, I will need to edit each patch just to change the midi channel and save it as a user setting. Am I missing something?
  22. I am looking for an official Casio MIDI driver, preferably one specifically for the XW-P1. Under the "Devices and Printers" section of the Control Panel on my computer, the device comes up as "CASIO USB-MIDI" with a Microsoft generic driver, not an official Casio one. I have scoured the Casio support website for a long time now in search of an official driver and nothing has come up. No drivers for this synthesizer model. No generic MIDI drivers whatsoever. Just the 1.11 firmware update and the Data Editor. All I need is a link to the MIDI driver download. I run Windows 7.
  23. I am on 1.11 and have been unsuccessful in disallowing Program Change in Controlling other Modules via Midi. I have found the following but it does not seem to do what I was to believe it would, Thanks,,,,please advise. "" Improvements Provided by This Update Version 1.10 >> Version 1.11 • Improved operation of the external part volume. • Improved certain operation. Version 1.01 >> Version 1.10 • Adds "MIDI EDIT" in Performance Edit Mode. Press the "PERFORM" button and then press the "EDIT" button to display the Performance editing screen.. You can find the following entry under "Phr Enable" in the list. Display Description Settings Mixer OUT Specifies whether or not the value is transmitted by editing Zone 1-4. Off, On PrgBnk Out Specifies whether or not value is transmitted by changing Tone Number.<<<<<<<<<<<<<<< Prg.. Only Program Change, Bnk.. Both Program Change and Bank MSB/LSB. Off, Prg, Bnk PrgBnk Edit This group includes program and bank value. When you press "ENTER", you can edit the following list. it is transmitted when the performance number is changed. Bank MSB Specifies Bank MSB Value. 0 to 127 Bank LSB Specifies Bank LSB Value. 0 to 127 Prog Chg Specifies Program Change Value. 1 to 128 << ""
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.