CairnsFella Posted May 21, 2017 Share Posted May 21, 2017 This question arises from some dabbling I was doing last night. It is possible I am missing something obvious, but I would rather obtain a solution and be considered a tad daft - or if not a solution at least an answer, even if it doesn't solve my problem - than protect my ego and remain ignorant. Quite simply, whilst using the step sequencer with a sequence running, I was scrolling through various PCM presets in the mixer, in search of something that approaches a tone that I am after. However, although the editable parameters are minimal - a point I expand upon in another recent post - I am wanting to make some edits on the fly in order to get closer to the tone I want. Obviously, one way or another, I am able to do both processes: explicitly, 1. scroll through the presets, and 2. edit parameters. However, I cannot seem to do this in an efficient way. Unless I am much mistaken, whilst in the mixer, where I am able to easily scroll through the presets whilst the step sequence is running, the control knobs do not seem to be effecting the tone selected. I do not want to be going into and out of menus to achieve what I want to, as it is a lengthy enough process as it is. Is it possible I have something wrongly configured i.e. should I be able to tweak the PCM Melody tone parameters using the knobs whilst in the mixer with the step sequencer is playing the tone. Or, is there a different place/page that I could/should be using where I can do both of these things in the same place. Any pointers appreciated. I should note that I CAN achieve pretty much what I want by playing the part in the phrase sequencer. However, I would obviously prefer to remain within the area that I am actually working. If it comes to it though, I can live with doing it this way. Quote Link to comment Share on other sites More sharing options...
Gnomo Alegre Posted May 21, 2017 Share Posted May 21, 2017 Hello, Do you comment in the step sequencer menu? You would have to choose the tone menu to edit your tones.In the mixer there are only a few features to modify. Quote Link to comment Share on other sites More sharing options...
CairnsFella Posted May 21, 2017 Author Share Posted May 21, 2017 But in the tone menu I cannot easily increment the tones such that they are reflected by the step sequencer whilst it is playing. No matter. I have been using the phrase sequencer to audition the tones (where I can also edit as I scroll through). Not ideal, but it works OK. Appreciate the response though. Thanks. Quote Link to comment Share on other sites More sharing options...
AlenK Posted May 21, 2017 Share Posted May 21, 2017 I haven't checked but I suspect that while you are in the Mixer the knobs will reflect either (a) the assignments the XW gives them in Tone mode for whatever tone is assigned to Part 1 with the knobs only affecting Part 1 or (b) whatever assignments are given to them in the currently active Performance with the knobs affecting those of Parts 1 to 4 as per the settings for each knob in the Performance (there is always a currently active Performance even if you aren't in Performance mode). It may depend on whether you were in Performance or Tone mode before pressing MIXER. All just conjecture as I probably won't have time for a while to check. 1 Quote Link to comment Share on other sites More sharing options...
XW-Addict Posted May 21, 2017 Share Posted May 21, 2017 7 hours ago, AlenK said: I haven't checked but I suspect that while you are in the Mixer the knobs will reflect either (a) the assignments the XW gives them in Tone mode for whatever tone is assigned to Part 1 with the knobs only affecting Part 1 or (b) whatever assignments are given to them in the currently active Performance with the knobs affecting those of Parts 1 to 4 as per the settings for each knob in the Performance (there is always a currently active Performance even if you aren't in Performance mode). It may depend on whether you were in Performance or Tone mode before pressing MIXER. All just conjecture as I probably won't have time for a while to check. That is correct, the Modes effect what you can alter in the mixer it can alter step sequence each part of the step sequence , in the mix by creating several performance assigning #CC to the knobs and then saving the sequence. With the beauty all effects or changes made remained is pretty cool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.