XW-Addict Posted September 21, 2014 Share Posted September 21, 2014 How can I have the PX5 trigger the step sequencer from the G1 to start playing, I've got the G1 in slave mode and the PX5 in master and also configured Performance mode to have the pedal start and stop the sequencer but I want it sync perfectly when I press the key's. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted September 21, 2014 Share Posted September 21, 2014 Sounds like you have it all set up correctly. Let's see. Did you power off and restart the G1 after switching to slave mode? This tripped me up once. 1 Quote Link to comment Share on other sites More sharing options...
XW-Addict Posted September 22, 2014 Author Share Posted September 22, 2014 I've done that also every changes rebooted the G1, I've looked into the manual and midi implementation from both to see if there a way.I know the G1 can start the Sseq internally by Performance setting arpeggio set at ON and also Arp synchro at ON so its hard to tell ifthe PX5S can send an Arp synchro event to the G1 specifically to start Sseq might be odd what i'm saying in any case I can use the pedalto start stop the Sseq. 1 Quote Link to comment Share on other sites More sharing options...
XW-Addict Posted September 27, 2014 Author Share Posted September 27, 2014 Ok so found what I've been looking for no stress should have done it in the first place searching in the previous post.But here is how you can trigger Sseq using NRPN. http://www.casiomusicforums.com/index.php?/topic/4512-is-there-a-way-to-trigger-phrases-from-daw/ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.