XW-G1
107 files
-
Djerazore Great gift PACK. August 2014
By djerazore
To make this file compatible with all systems I compressed with zipper integrated windows
other things since I create sounds for this model of Casio XW-G1 nobody ever thank me in terms of number of downloads today.
I put my work files and some others graciously free download and no one says thank you, while I when I downloaded a file I always thank ... it is always nice
226 downloads
-
Even Harmonics Waveform
By BrettM
This is the waveform that contains all even harmonics, created in Audacity with C5 (523.25 Hz) as the fundamental. The sample wave contains the first 20 even harmonics (each with 1/n amplitude). It does alias a bit above C5, but down pitches nicely.
I got interested in it because you would think it would be one of the standard synth waves, given that sawtooth contains all odd and even harmonics, and square and triangular waves contain all odd harmonics. But this wave is more complex than the others, looking a bit like synth wave 159, CZ DoubleSine.
I also got interested in it in light of the discussions about the harshness of the XW distortion, and reading that “warm” analog distortion creates even harmonics, as opposed to “harsh” digital distortion which creates odd harmonics. To this end, I used Audacity's Limiter effect to clip the wave at various levels, thereby introducing some, hopefully “warm”, distortion. The soft clipping method was used.
So the User Wave in this download contains five splits as follows:
Split 1 : the unclipped Even Harmonics Waveform
Split 2 : soft clipping to -2.5 dB
Split 3 : soft clipping to -5 dB
Split 4 : soft clipping to -7.5 dB
Split 5 : soft clipping to -10 dB
You can turn each split on or off by setting its volume to zero or 127 (or some other value). You can also have multiple splits playing, detuned to taste. You can also run them through the Distortion DSP, but this probably starts introducing odd harmonics, especially at higher gain settings.
90 downloads
-
(1 review)
0 comments
Submitted
-
G1 Drawbar Pack
By BrettM
After experimenting with the nona-layer method I posted in the G1 area a while back, I now realise there is an easier way to create a complete drawbar organ on the G1: save the nine basic drawbar tones as splits across two user waves. Each split corresponds to one drawbar. Then all you have to do is edit the volume of each split to create the desired registration. Don't forget to change the volumes in increments of 16 if you want true drawbar authenticity, although finer adjustments are possible. The splits are constructed as follows:
File/Split Note played Drawbar
DBL88888 Split 1 C3 16'
DBL88888 Split 2 G4 5 1/3'
DBL88888 Split 3 C4 8'
DBL88888 Split 4 C5 4'
DBL88888 Split 5 G5 2 2/3'
DBH8888 Split 1 C6 2'
DBH8888 Split 2 E6 1 3/5'
DBH8888 Split 3 G6 1 1/3'
DBH8888 Split 4 C7 1'
Also included in the pack is a performance which ties it all together, including the 2nd and 3rd percussion in zones 3 and 4. Knob 1 adjusts the volume of zone 3 and thus switches 2nd percussion on or off and increases it's volume in the mix. Ditto for knob 2 and 3rd percussion. Knob 3 controls the overdrive gain of the rotary speaker and knob 4 controls its speed.
It uses up two user waves, but this is a small price to pay for a fully functional drawbar organ. Save the files to a card until needed.
The main limitation of this set up is that it chews up the polyphony pretty fast because we're mixing the drawbar sound in real time. One note on the keyboard activates 11 tones. A triad uses 33! If this causes a problem, just record a single note, say C4, in the sampler and you're back in business. This is also a good way to store specific registrations that you may want to reuse. Enjoy!
=== Version 2.0 ===
I noticed some distortion when playing triads in version 1.0 of the organ, which I put down to exceeding the polyphony, but now realise that it was just straight out clipping. So version 2.0 has the same files with the volumes of each split reduced from 127 to 80. This should eliminate any distortion and also makes it easier to create standard registrations using stop increments of 10 rather than 16, you may have to turn up the volume a bit more however. When some of the drawbars (splits) are "pushed in" (turned down), it may be possible to increase the volumes of the others without experiencing clipping.
=== Version 3.0 ===
I have since realised that the pitch shifter can shift up two octaves, but can shift down many more, so I've raised everything by an octave. Thus all the notes in the table above are an octave higher. This allows the organ to play from C7 down which makes it much more playable. Previously the notes repeated after C6. I've also improved the looping in the splits.
320 downloads
(0 reviews)0 comments
Updated
-
GrooveBox 1.ZSS
NOTE: The website would not let me upload the step sequence with the correct extention of .ZSS, I had to change it to .ZSQ to upload it. So if you download it you will have to change the file extention from .ZSQ back to .ZSS the correct file name extention.
Description:
This is the StepSequence with a new user configuration called GrooveBox 1.
I had an issue using the XW-G1 factory settings for the StepSequencer as a groovebox. The issue is I want to use the sliders to turn the parts on & off with all drum parts and the bass guitar part on the same group of sliders. The factory setting has the kick drum on slider 8 in the first set of sliders (1-8 sliders) and the other drum parts on 9-12 sliders and the bass guitar on part 13.
So I created a new user step sequence configuration with the parts moved around a little. I moved the kick drum from slider 8 (part 8) to slider 13 (part 13), the bass guitar from slider 13 (part 13) to slider 14 (part 14), and solo 1 from slider 14 (part 14) to slider 8 (part 8). I could not change the part names. The part 8 is still named "Drm1" even though it is now "Sol1", part 13 is still "Bass" even though it is now "Drm1", and part 14 is still named "Sol1" even though it is now "Bass".
Instructions for use:
1. Press the "STEP SEQUENCER" button
2. Press the "SELECT" button to select sliders 9-16
3. Create a sequence by turning the buttons off & on for the parts 9-16 as usual
4. While playing the sequence, Press the "MIXER" button to bring up the mixer menu and make sure "Part" is selected so the sliders turn on & off the parts. Slider up turns on the part & slider down turns off the part
70 downloads
(0 reviews)0 comments
Submitted
-
Groovy Loops G1
By XW-Addict
Groovy loops from patches its a mix of these patches and tones combined sampled together as a loop to groove on.
Added an additional 10 loops to jam with.
844 downloads
-
Groovy Sample Loops Part 2
By XW-Addict
Groovy Loops Part 2.
Based on Performance patches and Step sequence.
Package for this going to be called Run_The_Looper
Some of these loops where build with one Performance patch,
Others with stacking another on top.
Some drum patterns have been realized by creating two patterns
and stacking them on top of each other which was one way to do it
but I've also could program a full step sequence using Bass , sol 1 2 for drums
Have fun if you have any idea's shoot me a few.
*added 8 more loops which are some of my experimental kind of stuff.
Package available soon.
1,096 downloads
- Groovy Loop
- Sample Loops
- (and 6 more)
(1 review)0 comments
Updated
-
(0 reviews)
0 comments
Submitted
-
High Sierra
By gtarsoncasio
This is kind of an ambient piano choir, strings combination performance I made this afternoon.
Notice that with a very soft touch, you can get the choir/strings to sing without waking up the
the piano keys, IF you are very soft on your touch. There is some great music hidden inside of
this performance patch, and it is your job to pull it out,. so get after it now! (lol)
I hope you enjoy this. It's a nice performance to chill out to.
60 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)
0 comments
Submitted
-
Infinite Motive Set
By XW-Addict
Some grooves to play with build with G1. Bpm either 125 or 135.
217 downloads
(1 review)0 comments
Submitted
-
Interstellar patches and drumset
By XW-Addict
Before installing don't forget to store you're own patches in user space .
Thank you for downloading Its not finished yet and this package not in order meaning some file needs more tweaks but I guess better now then 2later to upload .. Missing are Phrases , Arpeggio's and linking performance to step sequences but experiment along and something will come up if you mix them a bit.
Some patches have buttons assigned use them to get a nice blend of sonic,
Some patches have arpeggio .
Some patches Solely build for use with looper.
Some patches experimental XD like hey gotta try something news once a while.
Some patches may be terrible that way but fun in the other.
Some patches and stepsequence are still under construction.
What I'm missing is using the solo-synth within performance patches I've discovered
It would make a bigger difference which will be the next thing some.
Enjoy.
172 downloads
-
(0 reviews)
0 comments
Submitted
-
Jazz fusion and all of my work in progress ZSS
By XW-Addict
Jazz Fusion performance patch I fooled around with to program the XW and unfinished unamed duplicated StepSeq I made during the time.
122 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)
0 comments
Submitted
-
(1 review)
0 comments
Submitted
-
(1 review)
0 comments
Submitted
-
(1 review)
0 comments
Submitted
-
(0 reviews)
0 comments
Submitted
-
LastOrder
By XW-Addict
Progressive Rock kind of thing feel free to improve .
Here how it sounds.
https://soundcloud.com/clay-louis-petty/lastorder-dt
72 downloads
(0 reviews)0 comments
Updated
-
LifeForm
By XW-Addict
Contains.
DeepSpace zpf //fun patch
LifeForm zpf //Hear demo
SpaceStation zss //four patterns
WaterDrop ztn //which is actually edited SeqeunceSine tone
Its my first clean patch assembly
left side keyboard bass lead sound triggerd with or without arpeggio,
Interesting part is the drop you get with arpeggio by pressing two following
keys at once. I've used that to switch to the next pattern gives a nice effect.
73 downloads
-
LIVE JAM FX.ZPF
EDM Live Jam FX with Performance Multi-function Keys
Performance Name: LIVE JAM FX
This performance uses multi-function keys to change the tone/patch being played in Zone1/Part 1 from C- to C6. The multi-function keys section is from C#6 to C7. The black key multi-function keys are control keys that turn DSP effects on/off for Zone1/Part 1, change the tone to play on Zone1, and change the DSP effect being used. The white multi-function keys section quickly sets the DSP effect to a preset effect.
Link to picture with more info:
http://www.facebook.com/photo.php?fbid=257944387710927&set=a.257944371044262.1073741836.100004861031136&type=3&theater
72 downloads
- Performance
- FX
- (and 4 more)
(0 reviews)0 comments
Submitted
-
Low Res Kick Drums - Set 1
By Display Name
Set of 5 low-res kick drums. Good for retro or further processing.
97 downloads
(1 review)0 comments
Submitted
-
MeloString-Va-LeadSyn 1
By djerazore
2 Synth Sound more from the Analog Past to the Future
188 downloads
(0 reviews)0 comments
Submitted