PX-S3000
Registrations for the Privia PX-S3000
9 files
-
PX-S3000 Organ Bank 1
By Mike Martin
4 Organ Registrations with rotary speaker settings optimized and knobs preset for rotary control.
Presets 1 & 2 are based on the JS Organ tone. #2 has the chorus/vibrato removed.
Preset #3 is a Full Drawbar tone
Preset #4 is a variant on the click organ tone.
My recommended rotary settings
Generally speaking I'm setting Ramp up/down times around 40-45
Slow speed is also around 40-45
Fast speed 112-119
Overdrive and chorus to your personal taste.
182 downloads
(0 reviews)0 comments
Submitted
-
PX-S3000 EP & Clav
By RichF
Privia PX-S3000 Registrations: EP & Clav
This is a collection of four PX-S3000 Registrations focused on electric piano and clav sounds, featuring some time-honored amplifier and effect combinations.
LOADING INSTRUCTIONS
Create a folder titled “MUSICDAT” on a USB flash drive and copy the EP&CLAV.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear.
On the PX-S3000:
1. Touch and hold FUNCTION to access the function menu.
2. Use </> to select MEDIA, then touch ENTER.
3. Use </> to select LOAD, then touch ENTER.
4. Use </> to select “Reg Mem Bank”, then touch ENTER.
5. Use </> to select “EP&CLAV”, then touch ENTER.
6. Use </> to select a destination bank, then touch ENTER,
7. Touch + to confirm, then touch EXIT when “Complete” appears on the display.
Please refer to page 60 in your User Guide for further details.
REGISTRATION DESCRIPTIONS
1: Stage Amp EP
Tine- based electric piano with phaser, light tremolo, FD-TWRV2 amp cab model and tempo-synced delay.
Rhythm: 16 Beat Bld
Knob1: Delay depth
Knob2: Phaser rate
2: JC Tines
Tine-based electric piano with clean-ish RL-J12 amp model and fast delay.
Knob1: Delay depth
Knob2: Amp gain
3: Touch Wah EP
Tine-based electric piano with touch-responsive FAT wah model.
Knob1: Chorus
Knob2: Reverb send
4: Touch Wah Clav
Clav with touch-responsive CRY wah model and FD-TWRV2 amp cab model. Knob1: Chorus
Knob2: Reverb send
203 downloads
-
PX-S3000 Splits
By RichF
Privia PX-S3000 Registrations: Splits
This is a collection of four PX-S3000 Registrations that feature split and layered combinations of various Tones, with relevant Rhythms selected. The PX-S3000 allows the pitch bend wheel, arpeggiator, and pedals to be applied to specific layers. These Registrations take advantage of this, allowing expressive and realistic performance when using multiple Tones at once.
LOADING INSTRUCTIONS
Create a folder titled “MUSICDAT” on a USB flash drive and copy the SPLITS.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear.
On the PX-S3000:
1. Touch and hold FUNCTION to access the function menu.
2. Use </> to select MEDIA, then touch ENTER.
3. Use </> to select LOAD, then touch ENTER.
4. Use </> to select “Reg Mem Bank”, then touch ENTER.
5. Use </> to select “SPLITS”, then touch ENTER.
6. Use </> to select a destination bank, then touch ENTER,
7. Touch + to confirm, then touch EXIT when “Complete” appears on the display.
Please refer to page 60 in your User Guide for further details.
REGISTRATION DESCRIPTIONS
1: Opera Death Scene
An orchestra with a solo contrabass in the left hand, and StringsVoice and mandolin layer in the right. The arpeggiator applies strumming gestures to the mandolin. The pitch bend wheel applies to the contrabass but not to the upper layers. Knob 1 adjusts the balance between the StringsVoice and Mandolin layers.
Rhythm: March 1
Knob1: Layer balance
Knob2: U2 fine tune
2: Dhelicacy Split
Tanpura in the left hand, sitar and harmonium in right. Use Knob 1 to balance the sitar and harmonium layer. The pitch wheel affects only the sitar, and the damper pedal sustains only the tanpura.
Rhythm: Bhajan
Knob1: Layer balance
Knob2: U2 fine tune
3: Guangdong Split
Wood pad in the left hand, mixable Yang Qin and Pi Pa tremolo layer in the right. Rhythm: Guangdong
Knob1: Layer balance
Knob2: U2 fine tune
4: Pad+Lead
A left-hand pad with right-hand overdriven synth lead. The lead uses delayed vibrato, drive, MS- PLX amp cab model, compressor and delay. The damper applies only to the pad, and the pitch bend applies only to the lead, allowing you to pedal chords and bend the lead with your left hand. The knobs adjust filter cutoff and resonance only for the lead.
Rhythm: Rock Anthem
Knob1: Cutoff
Knob2: Release
157 downloads
(1 review)0 comments
Submitted
-
PX-S3000 Orchestral
By RichF
Privia PX-S3000 Registrations: Orchestral
This is a collection of four PX-S3000 Registrations that combine solo and ensemble orchestral instruments, taking advantage of the PX-S3000's layer and split capabilities and adding ambience with the Hall Simulator.
LOADING INSTRUCTIONS
Create a folder titled “MUSICDAT” on a USB flash drive and copy the ORCHESTRAL.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear.
On the PX-S3000:
1. Touch and hold FUNCTION to access the function menu.
2. Use </> to select MEDIA, then touch ENTER.
3. Use </> to select LOAD, then touch ENTER.
4. Use </> to select “Reg Mem Bank”, then touch ENTER.
5. Use </> to select “ORCHESTRAL”, then touch ENTER.
6. Use </> to select a destination bank, then touch ENTER,
7. Touch + to confirm, then touch EXIT when “Complete” appears on the display.
Please refer to page 60 in your User Guide for further details.
REGISTRATION DESCRIPTIONS
1: Symphony Orchestra
Mixable stereo strings + stereo brass layer with timpani in the lower octaves. The Hall 3 simulator adds ambience
Knob1: Layer balance
Knob2: U2 fine tune
2: Vibrato Ensemble
String ensemble featuring solo violin with natural vibrato. Use Knob 1 to adjust the balance between the ensemble and the solo violin.
Knob1: Layer balance
Knob2: U2 fine tune
3: Tremolo Strings
Strings with delayed tremolo bowing effect.
Knob1: Tremolo rate (bowing speed)
Knob2: Tremolo depth
4: Orchestra+Piano
An orchestra with Brass & String in the left hand, and Mellow strings + Flute/Oboe in right. Use Knob 1 to balance the string and flute/oboe layers. With ACCOMP turned on, playing a chord anywhere on the keyboard triggers a piano pattern. The Stadium Hall Simulator adds ambience.
Knob1: Layer balance
Knob2: U2 fine tune
199 downloads
(1 review)0 comments
Submitted
-
PX-S3000 Motion Pads
By RichF
Privia PX-S3000 Registrations: Motion Pads
This is a collection of four PX-S3000 Registrations that use its built-in arpeggiator and DSP effects to create animated soundscapes.
LOADING INSTRUCTIONS
Create a folder titled “MUSICDAT” on a USB flash drive and copy the MOTION_PADS.RBK file into it. If you’ve previously used this drive with your PX-S3000, this folder may already exist. Place the drive into the PX-S3000’s USB port and wait for the word “MOUNTING” to disappear.
On the PX-S3000:
1. Touch and hold FUNCTION to access the function menu.
2. Use </> to select MEDIA, then touch ENTER.
3. Use </> to select LOAD, then touch ENTER.
4. Use </> to select “Reg Mem Bank”, then touch ENTER.
5. Use </> to select “MOTION_PADS”, then touch ENTER.
6. Use </> to select a destination bank, then touch ENTER,
7. Touch + to confirm, then touch EXIT when “Complete” appears on the display.
Please refer to page 60 in your User Guide for further details.
REGISTRATION DESCRIPTIONS
1: Pad+Sweep Arp
Warm Pad layered with an arpeggiated synth line using LFO wah to create a filter sweep.
Rhythm: Electronic Bld
Knob1: Wah manual
Knob2: Wah speed
2: Pad+Bounce Arp
Xenon pad plus a filter-swept arpeggiated VA synth with auto pan effect timed to match arp speed (adjusting tempo from 105 desynchronizes auto pan).
Rhythm: 16 Beat Bld
Knob1: Attack
Knob2: Release
3: Shimmering Drops Pad
Synth Voice Pad Pad with a "shimmering" effect created with an arpeggiated phaser EP sound with increased attack. Use Knob 1 to adjust the attack time, modulating the EP between "shimmering" and "droplet" gestures.
Rhythm: EP ballad 1
Knob1: Attack
Knob2: Release
4: Whales in VR
Soft Pad with digital whale song generated by a randomly arpeggiated sine lead with phaser, delay, and pitch modulation.
Rhythm: Trance
Knob1: Layer balance
Knob2: U2 fine tune
139 downloads
(1 review)0 comments
Updated
-
Vintage Synth Pads
By Mike Martin
Two classic synth pads along with two variations that also include piano.
174 downloads
(1 review)0 comments
Submitted
-
Ambient Pianos
By Mike Martin
A set of 4 heavily modified pianos (and layers) for the PX-S3000
201 downloads
(1 review)0 comments
Submitted
-
Clean Rhodes Bank1
By Mike Martin
Lots of discussion about this particular sound so I thought I'd give a few here for people to play with. Feedback appreciated.
My process:
Start with one of the existing preset tones Select DSP and Bypass the existing effects to hear the basic tone Dial in a new DSP effect - I mostly used the Re-Amp or distortion ones, but I'm not going for any distortion just the tone shaping tools that are here. The amp sims have a Preamp/Drive section plus the "speaker" they're on two different DSP blocks. For a couple of these I used the preamp set to CLEAN and actually bypassed the Speaker Sim but there are over 90 speaker sims worth checking out. Some of these algorithms have tone or EQ stages which can dramatically shape the overall tonal character. You can additionally use the knobs to adjust filter, reverb mix and other parameters to taste Additional trick - adjust release slight to the left of center. It will make the EP snappier overall.230 downloads
(1 review)0 comments
Submitted
-
Clav-Wah Bank1
By Mike Martin
A set of 4 Clavinets. The first two taking advantage of the PX-S3000 speaker simulations, the second two are cleaner LFO wah presets.
126 downloads
(1 review)0 comments
Submitted