jenny

example. Home audio system LG DM5360K I only have a cable. 1 stereo jack - 2 x RCA I know that it is possible through the linear output of the keyboard. But I do not have a cable 2 mono - 2 RCA

I tried. The output of the phones does not give pumping to the in AUX amp. It is necessary to increase the volume on the keyboard to almost the maximum. I do not know if it's okay? Although everything works fine. Only the volume on the keyboard should be added to the maximum. Do not burn the amplifier on the keyboard? I do not know what resistance there should be.

Vorbis. Everything is right. It is saved only in the bank cell. ------------ Click mixer and there set the same value that you set up. If it's necessary with the style (get out of the mixer) and then save it all in the cell of the bank. When awake to play with this tone it should work as you set up. The tone with the settings will be saved in the bank cells. This I wrote for another user - when checking ---------------- P.S. Your correctly noted --- Probably some tones get corrupted

Brad Saucier Thank you so much. I have a cable. 1/stereo mini jack - 2 for in AUX ( L and R ) But I was afraid to connect myself. Because the instructions do not say about this. I want to try to connect to the music center. I know that me need to minimize the loudness on the keyboard.

No one knows?

Can I connect ( CTK 7200 ) from the headphone output to the in AUX amp? ( ( music Center ) In the instruction Casio CTK 7200 it is not written. There are only - headphones. But the instruction on the CT-X 3000/5000 says that you can connect from the headphone output to in AUX.

I now checked again. Clean GT M Tone 1. Press Tone Edit. Go to the parameter - Rev. Send 2. For example. Change it to 079 Save the tone (User Tones). Now he plays with the parameter 079. But ..... turn on then other tones, play rhythms with them. Then go back to User Tones and see what the Clean GT M parameter will be. It shows again by default 040. But it's worth a second click on the button and it plays normally and you can then see that the parameter is 079. And so every time. ----------------------------- This is not a problem with the button. Because it happens with certain tones.

Thanks for the answer. Vorbis The keyboard is absolutely new and even guaranteed. I have 7200. This is a problem not only for me, but there are still users with 6200 - the same problem. He addressed the forum and I decided to check. I have the same problem as his. I do not think this is a button. This is apparently a keyboard processor problem. ---But this works fine if the DSP on---------- --------------------------------- Have you tried playing with other tones, playing rhythms on the keyboard? What happened when you again returned to this tone? ------------------ P.S. I did it, that he would keep the tone and work normally with the necessary parameters. Tone edit. Enable DSP tone: Enhance Type DSP-04 There is this parameter Rev Send . ( I can create it as needed and it will work.) When DSP is on, it works normally. Although it will show 40 by default.

Vorbis Reverb Send is one of the parameters that are saved when the modified tone is stored in UserTones..... I say. It is necessary to press the button (UserTones) TWO times. Only then does it work. ------------------------------------------ Thanks for the answer. But I did not understand well what you're talking about. Perhaps you did not understand me. (I do not speak English well) ----------------------------------------- I'm telling you that the parameter (Reverb Send ) does not work when the tone is stored in USERS. It resets to the factory settings. Reverb Send ( 40 ) The parameter that stands before editing . But .... It works with the required parameters, only when the button is pressed again (users tones). P. S. Resetting the parameter by default affects certain tones. --------------------------------------------- Try it. 1. Change the parameter -- Rever Send It is saved. --- User Tones 2. Then work with other tones or other operations. 3. Then turn the tone again. ( User Tones ) It will not work with the saved settings. It must be pressed TWO times.--- then your configured parameter ( Rever Send ) will work

Nobody can check and say?

Tone Edit. The Rev.Send parameter does not save custom values. (Some tones) Resets by default. (40) TONE EDIT When setting the parameter - Rev.Send Does not save a custom ( user ) value. Resets to the default. ( 40 ) For - to work the saved value, press the user tone button twice. Only pressing twice - the set parameter Rev.Send will work Tone for verification (if anyone can check). Clean GT M Crunch Gt M1 (M2) GM SF ------------------ P.S. If it is the processor and it is weak. Then I'll look at other synthesizer manufacturers in the future. I'm upset.

Hi / Someone can me answer? How does switching between 8 banks work? How it all works on the CT-X 3000/5000? The CTK 7200 sometimes has a delay when switching banks. Nowhere is there a detailed review of the new synthesizers. I think without a detailed review there is no way to buy and order new models.

You can change the name of the style in the synthesizer itself. 1. When you move to the synthesizer - the style is stored User Data. 2. Then select a style --- Press ---> Pattern sequencer - just change the volume by one division. 3. Click Exit - Save the offer. Give him the name you want. Or I did not understand what you are asking?

I'm interested. How about switching banks of memory? ( X3000/5000 ) ---------------------------------------------------- On the CTK - 7200 sometimes triggers with a delay.

1. Measure the output voltage а power unit. 2. Try with another power supply (if there is one).

If it has batteries, then try to turn it on from the battery.

Does the CT-X5000 have a mixer?

I liked the design. But I expected something new with the style models. And how much ? ( CT-X5000 ) Fill in? 4 Variations. ( I see ) Intro? If there are no changes in the number of style models. think I'll stay with the CTK 7200. Or with MZ - X 500.

Happy New Year everyone! I would like to see ----- How to work 4 Fill in style ( Normal variftion) ? Do not change style in variation. From the instructions did not understand. Written to press the button 2 times.? 1 time is a change to the variation of style? 2 times - is it a Fill in ? How does it all work? To the style of playing (Normal) and only changing the fills.

Hello everybody. Who can tell me? Why when copying (replacing) a model of a new style or the factory style of instrumental parts from ready-made styles the sound (tone) of the instrument is not preserved as in the original style from which the copying takes place? Sounds ( tone ) wrong (empty, not processed, no saturation, bass) as in the style from which the copying takes place. Why the sound is not copied one to one.? Example. Model Fill in Drums ( and others musical instruments ) from the factory style to the user (editable) style (F) Thank you .