itsgottabe Posted December 5, 2013 Share Posted December 5, 2013 Does anyone know how to change the midi channel that the 5S transmits to? I've tried changing the Device ID and Basic CH under Midi in sys settings but that doesnt work. Thank you for your time. Quote Link to comment Share on other sites More sharing options...
Choppin Posted December 5, 2013 Share Posted December 5, 2013 Hello, The Px-5s is really very flexible and customizable. it can be a little daunting until you get used to it. You can output on up to 4 channels at once if you like per stage setting. Try this:Press [Bank] and then the number(s) to select your stage setting.Press[Edit]Press[Enter] on Stage Setting in the little windowPress[Enter] on Zone Edit in the little windowPress Number 6 twice to cursor down to MIDI EditPress[Enter]Press Number 6 twice to cursor down to External OutUse Knob 2 to dial in the desired MIDI out channel for that zone (for fine tuning use the + and - keys on the far upper right of the button panel). You will likely want to change the midi channels for all 4 zones. You can set them all the same or different. In the little window in the upper right corner you will see Z1. This means you are currently editing zone 1. To the left of the window is a - and + key under the heading Zone/Part/Step/Track. If you press the + key, the zone number will increase (Z2,Z3,Z4). As you change each zone, you can dial in the midi channel just as you had done for zone 1. When satisfied, Press [Write]. You can use Knob 2 to change the stage setting number you wish to write to if you like (or you the + and - keys on the far upper right). If you cursor down, you can change the Stage Setting name as well. When happy, press [Enter] and follow the prompts. 1 Quote Link to comment Share on other sites More sharing options...
itsgottabe Posted December 5, 2013 Author Share Posted December 5, 2013 Hello, The Px-5s is really very flexible and customizable. it can be a little daunting until you get used to it. You can output on up to 4 channels at once if you like per stage setting. Try this:Press [Bank] and then the number(s) to select your stage setting.Press[Edit]Press[Enter] on Stage Setting in the little windowPress[Enter] on Zone Edit in the little windowPress Number 6 twice to cursor down to MIDI EditPress[Enter]Press Number 6 twice to cursor down to External OutUse Knob 2 to dial in the desired MIDI out channel for that zone (for fine tuning use the + and - keys on the far upper right of the button panel). You will likely want to change the midi channels for all 4 zones. You can set them all the same or different. In the little window in the upper right corner you will see Z1. This means you are currently editing zone 1. To the left of the window is a - and + key under the heading Zone/Part/Step/Track. If you press the + key, the zone number will increase (Z2,Z3,Z4). As you change each zone, you can dial in the midi channel just as you had done for zone 1. When satisfied, Press [Write]. You can use Knob 2 to change the stage setting number you wish to write to if you like (or you the + and - keys on the far upper right). If you cursor down, you can change the Stage Setting name as well. When happy, press [Enter] and follow the prompts.Thank you for the great reply, I will try it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.