XW-G1
107 files
-
LIVE JAM FX.ZPF
EDM Live Jam FX with Performance Multi-function Keys
Performance Name: LIVE JAM FX
This performance uses multi-function keys to change the tone/patch being played in Zone1/Part 1 from C- to C6. The multi-function keys section is from C#6 to C7. The black key multi-function keys are control keys that turn DSP effects on/off for Zone1/Part 1, change the tone to play on Zone1, and change the DSP effect being used. The white multi-function keys section quickly sets the DSP effect to a preset effect.
Link to picture with more info:
http://www.facebook.com/photo.php?fbid=257944387710927&set=a.257944371044262.1073741836.100004861031136&type=3&theater
72 downloads
- Performance
- FX
- (and 4 more)
0 comments
Submitted
-
Jazz fusion and all of my work in progress ZSS
By XW-Addict
Jazz Fusion performance patch I fooled around with to program the XW and unfinished unamed duplicated StepSeq I made during the time.
122 downloads
0 comments
Submitted
-
Queen - Radio Gaga
By XW-Addict
Queen Radio Gaga I made it in a different key its a first version but It would be better on the P1 which has more tones to add my next version will be for the PX5S.
Here a demo from it.
https://soundcloud.com/clay-louis-petty/queens-radio-gaga-patch-demo-xw-g1
151 downloads
0 comments
Updated
-
PlukXlady -Synth pluck
By djerazore
One pluck synth you can make variation with filter Knob 1
58 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Quick Organ
By BrettM
While working on version 3.0 of the G1 Drawbar Pak, I started thinking about making an organ that just uses up one user wave slot rather than two. This is it. The problem is: how best to arrange nine sine waves over five splits.I tried a few combinations but this one turned out to be the most useful.
Split 1: 16', 5 1/3' and 8' drawbars fully out
Split 2: 4', 2 2/3' and 2' drawbars fully out
Split 3: 1 2/5' drawbar
Split 4: 1 1/3' drawbar
Split 5: 1' drawbar
I think many of the classic registrations are possible with this arrangement. E.g., the bread and butter tone of 888000000 is produced by just having the volume up on spit 1.Each of the high frequency "brilliance" drawbars has a dedicated split and is thus easy to adjust.
It is also worth remembering that each split has its own filter, which can be useful for generating more options in splits 1 and 2; and is especially useful for tweaking the mid tones in split 2.
I have not tried to implement percussion but it can be fairly easily added by combining this tone with the performance in the G1 Drawbar Pak.
=== Version 2.0 ===
I've tried to improve the looping.
97 downloads
0 comments
Updated
-
0 comments
Submitted
-
Infinite Motive Set
By XW-Addict
Some grooves to play with build with G1. Bpm either 125 or 135.
217 downloads
0 comments
Submitted
-
CZ Double Sine Organ
By BrettM
A user wave organ based on the CZ Double Sine waves with splits structured like the Quick Organ: http://www.casiomusicforums.com/index.php?/files/file/743-quick-organ/.
Brighter than the usual sine based organ tones, but can be filtered to recreate them if necessary. Also responds better to the resonant filter than standard organs.
90 downloads
0 comments
Submitted
-
XW-G1 - Sweet Dreams (are made of this)
By Brad Saucier
This was something I originally did on the PX-5s. I have heard some people use the XW's for this song. I decided to give it a go myself.
This is a step sequence and performance file along with custom melody tones for playing this song.
Demo on my soundcloud page....https://soundcloud.com/bradmz/casio-xw-g1-sweet-dreams-are-made-of-this
SweetDreams.ZPF - The performance file that brings everything below together.
SweetDreams.zip - Uncompresses as the ZSS step sequnce file used in the performance file above. Place in U:1-6
SweetLead.ZTN - Tone used in the performance zones 1 and 2. Place in U:107.
SawSweet.ZTN - Tone used in the step sequence parts 10 and 11. Place in U:106
SquareSweet.ZTN - Tone used in the step sequence parts 12 and 13. Place in U:105
Bender wheel is disabled for the lead sounds. Pitch bend is tuning the tom drum hit in the step sequence by way of the sequencer control track.
976 downloads
0 comments
Updated
-
0 comments
Submitted
-
LastOrder
By XW-Addict
Progressive Rock kind of thing feel free to improve .
Here how it sounds.
https://soundcloud.com/clay-louis-petty/lastorder-dt
72 downloads
0 comments
Updated
-
RainbowDubStep
By XW-Addict
Choco variant of dubstep. Preferred tempo 130 / 165 / 180
Here is how it sound.
https://soundcloud.com/clay-louis-petty/dubstep-city-dub2stepchoco
75 downloads
0 comments
Submitted
-
Synthesizer bees (Solo Synth)
By Gnomo Alegre
Flight of bees.
DSP: Auto pan.
OSC 1: CZ-Wave 29
OSC 2: Reverse Saw
OSC 3: #CZ-Wave 18
OSC 4: Sy_SH Pulse 1
OSC 5: White Noise (not brown noise)
127 downloads
0 comments
Submitted
-
StellarGroove
By XW-Addict
Though to add this one from the Interstellar package thing I'm working on.
Just from this Sseq I could derive lots of different rhythms.
Tip : Turn off with the mixer the bass, sol1, sol2, chrd to keep the
drum beat, change the drum patterns to a whole new drum beat.
Get and be inspired I've already got lots of other Sseq derived from only
this Sseq.
72 downloads
0 comments
Submitted
-
BizzarePad
By XW-Addict
This is the performance patch and step sequence I've did the cool and awesome motion with,
Use the Knobs to change how it sounds. The coolest thing is to create you're own phrase and then let
the arpeggio go at it.
Also use the the step buttons to go into sync with a step sequence and the Octave keys to go lower
in the key register -2 is the max to keep some sense in the sound.
*this still under construction as part of Interstellar package.*
183 downloads
0 comments
Updated
-
Chirps FX
By XW-Addict
Sampled Instrument FILE.
Load into sample player then go to Tone User bank 200 and select the bank where the file is loaded in.
Experimented with reverse recording with the sampler and edited with external recorder by recording the sound into it and slowed down the speed then using the XW-G1 editor to make the patch all done with experimenting.
What I've done is recorded a step sequence called ReverseForwrd (available for download from interstellar pakage) and recorded it as a reverse loop then I recorded that back into the roland micro br80 and played it back by slowing the playback speed to 25% this is different on the micro br80 because you retain the same fidelty as you would with normal speed but now slower which gives a different sonic Fx.
I liked it so much that I recorded it back into my computer chopped the good bits out and imported them as multiple waves into the XW-G1 editor and made this patch out of it one word.
AWESOME.
72 downloads
0 comments
Updated
-
GrooveBox 1.ZSS
NOTE: The website would not let me upload the step sequence with the correct extention of .ZSS, I had to change it to .ZSQ to upload it. So if you download it you will have to change the file extention from .ZSQ back to .ZSS the correct file name extention.
Description:
This is the StepSequence with a new user configuration called GrooveBox 1.
I had an issue using the XW-G1 factory settings for the StepSequencer as a groovebox. The issue is I want to use the sliders to turn the parts on & off with all drum parts and the bass guitar part on the same group of sliders. The factory setting has the kick drum on slider 8 in the first set of sliders (1-8 sliders) and the other drum parts on 9-12 sliders and the bass guitar on part 13.
So I created a new user step sequence configuration with the parts moved around a little. I moved the kick drum from slider 8 (part 8) to slider 13 (part 13), the bass guitar from slider 13 (part 13) to slider 14 (part 14), and solo 1 from slider 14 (part 14) to slider 8 (part 8). I could not change the part names. The part 8 is still named "Drm1" even though it is now "Sol1", part 13 is still "Bass" even though it is now "Drm1", and part 14 is still named "Sol1" even though it is now "Bass".
Instructions for use:
1. Press the "STEP SEQUENCER" button
2. Press the "SELECT" button to select sliders 9-16
3. Create a sequence by turning the buttons off & on for the parts 9-16 as usual
4. While playing the sequence, Press the "MIXER" button to bring up the mixer menu and make sure "Part" is selected so the sliders turn on & off the parts. Slider up turns on the part & slider down turns off the part
70 downloads
0 comments
Submitted
-
50 sample key layout (XW-G1)
By Brad Saucier
This loads as a user drum tone. It maps all 50 sample "splits" to the keys. They are organized from lowest to highest starting with user wave tone 200, split #1.
180 downloads
0 comments
Submitted