Privia PX-560
Tones and registrations for the PX-560
101 files
-
Jangle piano
By Jokeyman123
A more cutting "jangly" piano with some sustain. Tried to bring out fortissimo harshness with this patch.
108 downloads
(0 reviews)0 comments
Submitted
-
Jazz Split-1
By Tom Rung
1. Install JAZZY_VI.ZTN (displays as Jazzy Vibes) in a User Slot of Elec.Piano
The tone "Jazzy Vibes" is a modification of 047 Vibraphone 1
2. Install JZZVB-1.ZRM in a Registration Slot
Bassoon on/or off as desired.
Works well for practicing jazz melodies and left-hand bass patterns.
split point @ F3-F#3
110 downloads
(0 reviews)0 comments
Submitted
-
Jazz Split-2
By Tom Rung
1. Install JZZ-OCT.ZRM in a Registration Slot
The Octave Piano adds a nice jazzy touch to the Air E.Piano, and
the Ride Bass is accented by the Jazz Guitar.
Split on/or off as desired.
Works well for jazz and blues.
Only factory tones were used to create this registration preset.
split point @ F3-F#3
81 downloads
(0 reviews)0 comments
Submitted
-
Jazz6tet
By Jokeyman123
Just messing around with hex layers for practice-made up of acoustic bass, ep, vibes, sax, mute trumpet and jazz organ from existing tones, just split up roughly an octave each except bass. No drumkit since these can't be used in a hex layer. Just for giggles. Nice for creating multi-instrument voicings for a jazz ensemble approach (maybe!)
98 downloads
(0 reviews)0 comments
Submitted
-
Jokeyman123
By Jokeyman123
These are a few hex layer tones files I threw together using only the fundamental waveshapes in the PX560-saw, pulse, sine and square wavs. Nothing too preposterous-just trying to see what I could do with the simplest of waveshapes and a few hex layers, didn't even use the VA waves which can add an entirely different dimension to these or other hex layer tones. Alot of variety here.
No effects, no modulation settings-just factory pitch and mod wheels on these. Using the 3 control knobs and registrations, I'm sure I could do more as far as expressiveness, but I want to start simple. Can get alot more crazy with hex layers and I probably will, soon!
A little more info. I programmed these with a heavy dose of resonance and using the control knobs for cutoff and resonance similar to the XW's knob settings. 1st control knob brings in some Lfo. Discovered i can drive these tones to a type of ring modulation by peaking resonance, must be due to hex layers interacting.
47 downloads
(0 reviews)0 comments
Updated
-
Key-Organ Mix-1
By Tom Rung
1. Install CPL_HRPS.ZTN (displays as Cpl.Hrps'krd) in User Slot of Piano
2. Install KEY~ORG.ZRM in a Registration Slot
Split on/or off as desired.
Works well for blues.
201 downloads
(0 reviews)0 comments
Submitted
-
LADYHAWKE
By SimoneCarini
1 = Registration for LADYHAWKE soundtrack MAIN theme
2 = Registration for LADYHAWKE soundtrack SOFT theme
BY Andrew Powell (The Alan Parsons Project)
Load Registrations onto adjacent slots of the same Bank (1+2 or 3+4 for instance)
These Registrations are done by Preset Tones
Knob 1 is configured as mixer between Upper Tones
Knob 2 is configured as mixer between Lower Tones
Rhythms included with Full Range Chord
See more details in the attachment, so as to find out how all Real Time Controllers affect Tones
102 downloads
- registration
- tone
- (and 2 more)
(0 reviews)0 comments
Updated
-
More ckf for PX560 or ?
By Jokeyman123
These are 7 more rhythm accompaniment files I have re-created in styles that are a bit "older" stylistically. I had to make minor changes in my PX560 rhythm editor coming straight from the IDES 4.0 rhythm converter, which works pretty well for this although only 5 tracks which can cover alot of stylistic ground if done right IMO.
Brief description-think Brecker Brothers outside harmonies for 1, Al Jarreau style for another 1-2 (did some beautiful stuff in the 80s, now sadly gone). the godfather of soul for 1 and a straight power shuffle for another. These all have harmonic changes built-in for soloing over, or building your own. Again, only for personal or education as these have pretty strong "hooks" that some may think are pushing the envelope for what is OK but it took alot of my own work to try to get these in a form playable by my PX560, and maybe a few other older Casios.
If I get the word from our administrators as being too stylistically recognizable from others or for whatever reason, I will pull these down from here, and I have not posted these anywhere else. So far I have gotten a tentative OK from Mike Martin with caveats from a few other users about this so...
What happens in Casioland, stays in Casioland.!
161 downloads
(0 reviews)0 comments
Submitted
-
MR Funk wah
By Markkukalevi
Here is new tone MR Funk wah (load to Hex Layer) and registration for all controller. Modulation wheel is in use for Distortion, Knob1 for Dealay, Knob2 for Reverb, Knob3 for Amp and Expression pelad for Wah. This is a very Rock setting... I'd be glad to hear did you rock with it...? I love this odd px-560 ! In this setup I used MR Funk wah in Upper1 and Syn-Bass+Ld in Upper2.
First load the tone to Hexlayer and save it and then registration and save it to bank+area.
298 downloads
(1 review)0 comments
Updated
-
No Sound
By kybdsammer
This may seem like a strange "tone", but I use this when I want to quickly use the PX-560 as a controller for my Pianoteq software without having to worry about the keyboard tone setting or volume level. This "tone" produces no sound at all.
58 downloads
(0 reviews)0 comments
Updated
-
Oboe attack
By Jokeyman123
Tried to tone down LFO from factory. Added a bit of resonance and with a hex layer added a white noise attack.
89 downloads
(0 reviews)0 comments
Submitted
-
Organ & Wurly
This is my attempt at customizing a Hex-Layer organ tone layered with a Wurly. I've assign some pseudo drawbars to Knobs 1 & 3 & overdrive to Knob 2, the Modulation Wheel works as Leslie Slow/Fast and the Expression Pedal as Volume/Swell for the Organ not affecting the Wurly.
Dowload the 2 files, one is the hex-layer organ which needs to be loaded in the hex-layer user slot and the other is the registration for the respective tone. Once you saved the organ tone in the keyboard load the registration and place the Organbar tone in the first Upper 1 zone and than save again the registration.
Knob 1 - Volume for 2 Drawbars (midrange)
Knob 2 - Overdrive for the Organ (be careful with the amount)
Knob 3 - Volume for 2 Drawbars (high range)
Modulation Wheel - Controlse the Speed & Fast Rate of the Leslie Speaker (try all the values of the wheel casue it increases exponentially)
Expression Pedal - Controls the Volume/Sweel of the Organ
Pressing the Split button you'll have immediate access to a bass sound.
Also I've assign a preset Rhythm with which you can jam.
Hope you like it and you'll have a good use of it for your live performances!
Here is the video demo fo the sound:
418 downloads
- organ
- rotary speaker
- (and 1 more)
-
Piano & Str-1
By Tom Rung
1. Install PNO_1_SE.ZTN (displays as Pno 1 semi) in User Slot of Piano
2. Install OLD_UPRI.ZLT (displays as Old Upright) in User Slot of Hex Layer
3. Install PNO&ST-1.ZRM in a Registration Slot
Split on/or off as desired.
305 downloads
(0 reviews)0 comments
Submitted
-
Piano & Str-2
By Tom Rung
1. Install PNO_1_OP.ZTN (displays as Pno 1 open) in User Slot of Piano
2. Install PNO_1_CL.ZTN (displays as Pno 1 closed) in User Slot of Piano
3. Install PNO&ST-2.ZRM in a Registration Slot
253 downloads
-
Piano Bar-1
By Tom Rung
1. Install LNGPNO-1.ZTN (displays as Lounge Pno-1) in User Slot of Piano
The tone "Lounge Pno-1" is a modification of 007 DancePiano 1
2. Install PNOBAR-1.ZRM in a Registration Slot
Strings on/or off as desired.
Split on/or off as desired with split point @ F3-F#3
218 downloads
(1 review)0 comments
Submitted
-
Piano Bar-2
By Tom Rung
1. Install PNOBAR-2.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Split on/or off as desired with split point @ F3-F#3
72 downloads
(0 reviews)0 comments
Submitted
-
Piano Bar-3
By Tom Rung
1. Install GRN'SPNO.ZTN (displays as Grannie Pno) in User Slot of Piano
The tone "Grannie Pno" is a modification of 006 LA Piano.
2. Install DOLCE-1.ZTN (displays as Dolce-1) in User Slot of Piano
3. Install EP~BAR-3.ZRM in a Registration Slot
Split on/or off as desired with split point @ F3-F#3
280 downloads
(0 reviews)0 comments
Submitted
-
Piano Mix-1
By Tom Rung
1. Install UPRIGHT.ZTN (displays as Upright) in a User Slot of Hex Layer
2. Install PNO~MX-1.ZRM in a Registration Slot
133 downloads
(0 reviews)0 comments
Submitted
-
Piano Mix-2
By Tom Rung
1. Install DOLCE-1 (displays as Dolce-1) in User Slot of Piano
2. Install PNO~MX-2 in Registration Slot
Split on/or off as desired with split point at F3-F#3
117 downloads
(0 reviews)0 comments
Submitted
-
Piano Mix-3 (I consider this a perfect piano)
By Tom Rung
1. Install DOLCE-1 (displays as Dolce-1) in User Slot of Piano
2. Install PNO_1_CL.ZTN (displays as Pno 1 closed) in User Slot of Piano
3. Install PNO_1_SE.ZTN (displays as Pno 1 semi) in User Slot of Piano
4. Install PNO~MX-3 in a Registration Slot
Split on/or off as desired with split point at F3-F#3
1,352 downloads
-
Piano-Str Split-1
By Tom Rung
1. Install OLD_UPRI.ZLT (displays as Old Upright) in a User Slot of Hex Layer
2. Install PNO~ST-1.ZRM in a Registration Slot
The Rock Organ 2 accents the Acoustic Bass.
Split on/or off as desired.
split point @ F3-F#3
114 downloads
(0 reviews)0 comments
Submitted
-
Pno Atmosphere-1
By Tom Rung
1. Install PNO~AT-1.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Split on/or off as desired.
140 downloads
(0 reviews)0 comments
Submitted
-
Power Piano 1
By kybdsammer
For when you want something a little more powerful than the original Grand Piano.
226 downloads
(0 reviews)0 comments
Submitted
-
Power Piano 2
By kybdsammer
For when you want something more powerful than Power Piano 1.
307 downloads
(1 review)0 comments
Submitted
-
PX-560 Patch Script for Reaper DAW
By kybdsammer
You can load this .reabank file in the Reaper DAW track's "Bank/Program Select" section or through the Track FX window to select PX-560 tones.
This is my first attempt at creating a patch script file for the PX-560. I found a PX-5S patch script and used it as an example. I used the Casio PX-560 Appendix document as a reference to find the tone numbers (Bank Select MSB [5] and Program Change [4]) to use. I used "0" after every bank number and before the bank description. I have not added all the sounds to the file because it is a painstaking process since the tone numbers are not sequential and don't seem to follow any pattern (unlike the tones in the PX-5S which seem to follow a more logically grouped pattern). The .reabank file is just a simple text file, so you can modify this file to add other tones. If you are interested in doing this, hopefully you can figure it out by looking at the file and Appendix. It was a challenge to figure out how to group the tones, so I just ended up grouping them by banks (each bank can have a mix of tones) and naming them as best as I could. If you know of a better way of organizing the tones or creating a patch script, please share.
Reaper PX-560 patch script.reabank
52 downloads