Privia PX-560
Tones and registrations for the PX-560
101 files
-
PX-560M TRAIN
By SimoneCarini
Group Name: Hex Layer
it's just a creature, because there is no train sample available
if someone is able to develop it better, please, do it
99 downloads
0 comments
Submitted
-
PX-560M UPRIGHT
By SimoneCarini
Load Upright in Group Name: Hex Layer
Load Upright Registration in empty location
Load Upright Tone in Upper 1
See details in the attachment
about how all real time controllers are assigned
UPRIGHT.ZLT
98 downloads
0 comments
Updated
-
PX-560M NO NAME
By SimoneCarini
Registration for "Where the streets have no name" BY U2
Load Registrations onto empty slot
This Registration is done by Preset Tones
Rhythm included with Full Range Chord
See more details in the attachment, so as to find out how all Real Time Controllers affect Tones
98 downloads
0 comments
Updated
-
Jazz6tet
By Jokeyman123
Just messing around with hex layers for practice-made up of acoustic bass, ep, vibes, sax, mute trumpet and jazz organ from existing tones, just split up roughly an octave each except bass. No drumkit since these can't be used in a hex layer. Just for giggles. Nice for creating multi-instrument voicings for a jazz ensemble approach (maybe!)
97 downloads
0 comments
Submitted
-
PX-560M DOLCE ATK
By SimoneCarini
Dolce piano with softer attack, less dynamic, longer decay
Load Dolce ATK Tone in Group Name: Piano
Load Dolce ATK Registration in empty location
Load Dolce ATK Tone in Upper 1
See details in the attachment about how all real time controllers are assigned
97 downloads
0 comments
Updated
-
PX-560m GBoy
By patrkcirtap
A simple square wave sound as close as I could get to the sound from the Birabuto Kingdom song from Super Mario.
Load the registration in an empty area and the tone into an empty user hex layer location
Knobs 1 and 2 control cutoff and resonance.
Knob 3 controls delay.
The mod wheel controls the layer detune.
The assignable pedal toggles a white noise percussion effect on about the lower half of the keyboard.
89 downloads
0 comments
Submitted
-
PX-560M Comptine
By SimoneCarini
Rhythm for "Comptine d'un autre été l'après midi" BY Yann Tiersen
Load Rhythm onto USER empty slot
Use any piano Tone that you like
Rhythm SET with Full Range Chord
Tempo 75
Here are the chords
Em
G
Bm
D
Actually is a simple mix of Rhythms
Piano 8 Beat + Arpeggio 3
89 downloads
0 comments
Updated
-
Oboe attack
By Jokeyman123
Tried to tone down LFO from factory. Added a bit of resonance and with a hex layer added a white noise attack.
89 downloads
0 comments
Submitted
-
Evolve1
By Jokeyman123
another hex layer experiment-trying to obtain a "morphing" type of sound-still needs work, but thought it might be interesting for some. Used all 6 layers and amp envelopes to change timing of each sound fading in, added an attack and release sound.
89 downloads
0 comments
Submitted
-
PX-560M UPRIGHT 2
By SimoneCarini
Load Upright 2 Tone in Group Name: Hex Layer
Load Upright 2 Registration in empty location
Load Upright 2 Tone in Upper 1
See details in the attachment
about how all real time controllers are assigned
86 downloads
0 comments
Updated
-
Spaceship
By Jokeyman123
Just a silly bunch of sine waves and white noise-trying to recall some of the old CZ sounds I programmed years ago. The early reflections DSP realy brightens things up.
86 downloads
0 comments
Submitted
-
Jazz Split-2
By Tom Rung
1. Install JZZ-OCT.ZRM in a Registration Slot
The Octave Piano adds a nice jazzy touch to the Air E.Piano, and
the Ride Bass is accented by the Jazz Guitar.
Split on/or off as desired.
Works well for jazz and blues.
Only factory tones were used to create this registration preset.
split point @ F3-F#3
81 downloads
0 comments
Submitted
-
E.Piano Bar-1
By Tom Rung
1. Install EP~BAR-1.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Upper 2 & Lower 2 on/or off as desired
Split on/or off as desired with split point @ F3-F#3
76 downloads
0 comments
Submitted
-
EP-Pno Split-1
By Tom Rung
1. Install EP~PNO-1.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Split on/or off as desired.
split point @ F3-F#3
75 downloads
0 comments
Submitted
-
Casio_PX-560M.txt
By Templetunes
Cubase Patch Script. Tested on Cubase Elements 9.5. Enjoy and please forward and corrections.
72 downloads
0 comments
Submitted
-
Piano Bar-2
By Tom Rung
1. Install PNOBAR-2.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Split on/or off as desired with split point @ F3-F#3
71 downloads
0 comments
Submitted
-
Sym.Flute Split-1
By Tom Rung
1. Install SYM~FL-1.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
Split on/or off as desired with split point @ F3-F#3
71 downloads
0 comments
Submitted
-
PX-560M Mono Piano 3
By SimoneCarini
Load Mono Piano 3 in Group Name: Piano
Load Mono Piano 3 Registration in empty location
Load Mono Piano 3 Tone in Upper 1
See details in the attachment
about how all real time controllers are assigned
70 downloads
- piano
- registration
- (and 2 more)
0 comments
Updated
-
Brass-Piano Split-1
By Tom Rung
1. Install BR~PNO-1.ZRM in a Registration Slot
The Viola adds a little touch to the Brass, and
the BrassSect 1 may be toggled on/or off to accent the bass of the Piano.
Only factory tones were used to create this registration preset.
split point @ F3-F#3
64 downloads
0 comments
Submitted
-
No Sound
By kybdsammer
This may seem like a strange "tone", but I use this when I want to quickly use the PX-560 as a controller for my Pianoteq software without having to worry about the keyboard tone setting or volume level. This "tone" produces no sound at all.
58 downloads
0 comments
Updated
-
Whoopsie
By Jokeyman123
Just some more silliness-trying to do more CZ weirdness sounds....
56 downloads
0 comments
Submitted
-
PX-560 Patch Script for Reaper DAW
By kybdsammer
You can load this .reabank file in the Reaper DAW track's "Bank/Program Select" section or through the Track FX window to select PX-560 tones.
This is my first attempt at creating a patch script file for the PX-560. I found a PX-5S patch script and used it as an example. I used the Casio PX-560 Appendix document as a reference to find the tone numbers (Bank Select MSB [5] and Program Change [4]) to use. I used "0" after every bank number and before the bank description. I have not added all the sounds to the file because it is a painstaking process since the tone numbers are not sequential and don't seem to follow any pattern (unlike the tones in the PX-5S which seem to follow a more logically grouped pattern). The .reabank file is just a simple text file, so you can modify this file to add other tones. If you are interested in doing this, hopefully you can figure it out by looking at the file and Appendix. It was a challenge to figure out how to group the tones, so I just ended up grouping them by banks (each bank can have a mix of tones) and naming them as best as I could. If you know of a better way of organizing the tones or creating a patch script, please share.
Reaper PX-560 patch script.reabank
52 downloads
-
Banjo-Bass Split-1
By Tom Rung
1. Install BNJO-BSS-1.ZRM in a Registration Slot
Only factory tones were used to create this registration preset.
split point @ F3-F#3
49 downloads
0 comments
Submitted
-
HORNSTRA.ZRM
By wburson
Please note* this file did not upload or copy correctly, therefore, do not download this file.
I hope that I uploaded this correctly, but anyway, this is a registration that I've been using that has a really impressive horn lead with an orchestral backing. I really like the sound on many ballad type songs or classical pieces.
46 downloads
-
Jokeyman123
By Jokeyman123
These are a few hex layer tones files I threw together using only the fundamental waveshapes in the PX560-saw, pulse, sine and square wavs. Nothing too preposterous-just trying to see what I could do with the simplest of waveshapes and a few hex layers, didn't even use the VA waves which can add an entirely different dimension to these or other hex layer tones. Alot of variety here.
No effects, no modulation settings-just factory pitch and mod wheels on these. Using the 3 control knobs and registrations, I'm sure I could do more as far as expressiveness, but I want to start simple. Can get alot more crazy with hex layers and I probably will, soon!
A little more info. I programmed these with a heavy dose of resonance and using the control knobs for cutoff and resonance similar to the XW's knob settings. 1st control knob brings in some Lfo. Discovered i can drive these tones to a type of ring modulation by peaking resonance, must be due to hex layers interacting.
41 downloads
0 comments
Updated