About This File
As described in this comment:
Here is a stage setting for the PX-5S that will send one program change message to the CT-S1 - provided they connected via midi - for it to sound the 1st tone in the Synth category of its tone bank. That tone is called Synth-Brass, hence the name of the stage setting.
Moreover, you will have control over:
- filter cut-off [Slider 1]
- filter resonance [Slider 2]
- attack time [Slider 3]
- chorus [Slider 4]
- delay [Slider 5]
- reverb [Slider 6]
of the CT-S1
and
- use pitch bender
- use modulation wheel
all triggered by the PX-5S.
For the stage setting to send the program change message you may have to press [Bank] and the stage setting-number you saved it under.
For instance, if you saved it under Bank 0-0, you would press [Bank] and [0] [0].
By design, sound generation on the PX-5S is turned off in this stage setting. Likewise, the target (1 & 2) of Knobs 1-4 is not assigned.
Here is an example of the stage setting in use. All music is played on the PX-5S, even though it is the CT-S1 you hear. I used some of the sliders on the PX-5S to slightly alter the sound from the CT-S1:
Jay🎹
Edited by Jay C
added sound preview
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.