CT-S1 SynBrs (Stage Setting for PX-5S)

[Jay C]

CT-S1 SynBrs (Stage Setting for PX-5S)

View File

---

As described in this comment:

 

Here is a stage setting for the PX-5S that will send one program change message to the CT-S1 - provided they connected via midi - for it to sound the 1st tone in the Synth category of its tone bank. That tone is called Synth-Brass, hence the name of the stage setting.

 

Moreover, you will have control over:

 

• filter cut-off [Slider 1]
• filter resonance [Slider 2]
• attack time [Slider 3]
• chorus [Slider 4]
• delay [Slider 5]
• reverb [Slider 6]

 

of the CT-S1

 

and

 

• use pitch bender
• use modulation wheel

 

all triggered by the PX-5S.

 

For the stage setting to send the program change message you may have to press [Bank] and the stage setting-number you saved it under.

For instance, if you saved it under Bank 0-0, you would press [Bank] and [0] [0].

 

By design, sound generation on the PX-5S is turned off in this stage setting. Likewise, the target (1 & 2) of Knobs 1-4 is not assigned.

 

Jay🎹

 

 

 

 

 

 

 

---

• Submitter
  Jay C
• Submitted
  08/01/2021
• Category
  PX-5S Other

 

Edited August 2, 2021 by Jay C