casio_style

I wanted to update the firmware on CT X 3000, but immediately ran into a problem at the third point: "While pushing the buttons (7,8,9) below simultaneously, turn on the Digital Keyboard." I press buttons 7, 8, 9 simultaneously, nothing happens, the synthesizer does not turn on. Has anyone ever had such a problem?

Although the topic and question are quite old, there is a solution to this problem and it may be useful to someone else. The playback of a midi file can be recorded in a WAV recorder. To do this, run the midi file from a tablet or smartphone, for example, through the Synthesia program, and the tablet itself must be connected to the synthesizer via USB using an OTG adapter cable. In this version, the WAV recorder will record everything normally, if you wish, you can even play along to the midi file and this will also be recorded.

Tones are easy to edit. Select the tone you want to edit, then long press on the "Function" button and you are already in the menu for editing the selected tone. After you've done everything right, when you exit the edit menu, save the tone as a custom tone. And then you can "attach" it to any style, saving all the settings (style, tone, mixer parameters, etc.) in the registration bank.

Well, in fact, everything is not so complicated, the main thing is to understand how everything works. When you have pressed "Part" and the light is on, you can select parts (sections) in the mixer. These are: 1 - 9 song Sys, 1 - 8 Song Solo, 9 - 16 Song Solo, 1 - 8 Midi In, 9 - 16 Midi In, 1 - 9 Keyboard, 1 - 8 Rhytm. After selecting the desired section of the mixer, long press the button "PART", you already enter the selected section of the mixer and can adjust all the available parameters.

That's right, the 94 controller is a delay, only it is the system delay (as well as the chorus and reverb), and not the delay of the DSP effect. It seems to me that there is no access to digital effects DSP on midi on the casio CT X. And the delay parameters can be changed as usual, as on the chorus or reverb controllers, from 0 (off) to 127 (maximum)

AC7 is supported from what I've tested: cutoff controller (71), expression controller (11), modulation controller (1), resonance (74), pitch bend. All of these controllers can be applied anywhere in the style.

Hello, you can change any instruments in style. You can also change the parties. In this sense, the 7600 is an advanced tool. To edit the style, click on the pattern sequencer button, then click on the mixer button and in the desired place. By moving left and right in the mixer, you can move through parts in style. Moving up and down, you can change the parameters of the part. After all the changes, save your style as a custom one.

No, only separately, in each part of the accompaniment.

Hello. This can be done when editing a style. Press the registration button 8, the style setting menu will come out, here you select the "Part" option, then enter, another menu will come out, here in the "Break pt" option select the break note. You can check the sound of the accompaniment immediately.

Song sequencer casio contains a step-by-step event editor. It is certainly not that advanced, but you can always delete the wrong note and insert another note, you can also adjust the duration. and in the same place you can adjust the volume of the note (velocity). For me it is easier and faster than re-recording and inserting the recording every time.

I checked that the octave shift works in the style editing mode. I deleted the bass part, made an octave shift (you need to press the octave and transpose buttons together), then recorded the bass, everything was recorded with an octave shift. I did not exit the function - the style editing option.

Phrase pads record your performance on the built-in arpeggiator, so this method can be used to create new phrases on synths casio ct x3000 / 5000

Yes, the chord progressions are tied to the style and in fact - this is some famous song. Chord progressions are not editable. The list of progressions can be viewed on the official website of casio, in the pdf application. https://support.casio.com/ru/manual/manualfile.php?cid=008007005

I checked the style on CT X 3000, everything works fine. Corrected the panorama a little, changed the break point of the bass part. RunWayCS.AC7

How to create 3 layer tones on the CASIO CTK6xx - 7xxx series synthesizers. Usually, such an opportunity, the creation of 3 layer timbres or otherwise, 3 instruments per right hand is provided only on fairly expensive models of synthesizers, however, on the CASIO CTK series models, a good mixer and this allows you to quickly create and use 3 layer timbres on these models of synthesizers. The synthesizer must be in auto accompaniment mode as the layer 3 instrument will be used from auto harmony mode. Step 1. Select the tool for the first layer. Step 2. Turn on LAYER and select an instrument for the second layer, you can also go straight into the mixer and balance their overall sound. Step 3. Press and hold the AUTOHARMONIZE button and select the 004 Octave auto harmony option. Press again on AUTOHARMONIZE and exit the auto harmony selection mode. Now short press this AUTOHARMONIZE button and turn on the auto harmony mode itself. By default, in the auto harmony mode, the instrument of the 1st layer will play on the 3rd layer, an octave lower, but you can put any instrument on this layer and make the sound in unison with other instruments of the layer. Step 4. To do this, click on the mixer, in the mixer, go to the 4th track and select the instrument for the 3rd layer, then move down in the mixer and set the value +12 in the Coarse Tune option, that is, raise this instrument by an octave so that it sounds with other instruments in unison. That's it, the 3-layer tone is ready, when you exit, immediately save these settings in the registration memory.

There is no step back, so it is not possible to return to the previous settings, so the settings to step back must first be saved in the registration bank.

I can even drop the program itself to you, this is an exe file, it works without installation, if you are not afraid of viruses, you can parse it and see how it works.

I can’t say how this program works and what it adds to the file there, but the fact is that the style is unlocked and works as standard. The fact that the file is growing, I know when you re-unlock it will be the same result.

there is a program made long ago by Russian programmers to unlock AC7 files, only it works for Casio CTK. Right now I have unlocked one style, you can also look and compare what the differences will be.Synth Pop.AC7 unblock.AC7

Auto accompaniment instrument tones can be seen and changed if you enter style editing mode. To do this, just make a long press on the "function" button. Then click on the mixer and you can watch and change all available parameters.

and yet, you don’t need to copy all the rhythms from the casio ctk 7000, because somewhere around 50 percent of these rhythms are already on the casio ct-x3000. First check what rhythms are not on CASIO CT-X. Only then copy.

To save the rhythm as a user, you first need to edit it a bit, for example, just slightly change the volume of one part and when you exit the editing mode, the synthesizer will ask you if you want to save this rhythm, you agree and select a cell where to save.

Hello, all rhythms must first be saved as user-defined ones, only then they can be saved to a computer or memory card, and only then can you upload to another synthesizer.

I did nothing specifically to save the song in midi format. I just use the standard functions that are in the synthesizer. And then this MIDI then plays on the synthesizer and on the computer, like a regular MIDI. When saving, system tracks are extracted to standard MIDI tracks, as I understand it automatically. On my synthesizer firmware version 01.06. You definitely tried this way of saving FUNCTION - Media - Enter - Save - Enter - Mltr SMF - Enter ? Well, if necessary, I will shoot a video about it. All this is very strange that you do not record

This is incorrect information. Auto accompaniment on the CT-X3000 / CT-X5000 synthesizer is normally saved in midi format and then it can be played and edited in a midi editor on a computer. You can check it yourself FUNCTION - Media - Enter - Save - Enter - Mltr SMF - Enter