kybdsammer
-
Posts
154 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Files posted by kybdsammer
-
Power Pianos
By kybdsammer in PX-S3000
I always like a piano sound that cuts through a mix. This registration file contains four similar power pianos (these are modifications of the factory default GrPnoConcert tone and have a more powerful attack). Each registration has a different Touch Response setting. DSP is Stereo1BndEQ with an increased Dry Level. Knobs control Brilliance/Reverb. Rhythm is Straight 8Bt.
207 downloads
0 comments
Submitted
-
Detuned Piano, No Sound, Layered Piano plus
By kybdsammer in PX-S3000
Here's another registration with description of the 4 banks:
1. GrPnoConcert with slight pitch adjustment (knob 1 brilliance, knob 2 reverb send)
2. No Sound - for use with Pianoteq or your favorite VSTs
3. Layered GrPnoConcert with E.Piano Pad (use knob 1 for layer balance)
4. Layered Warm Pad with GrPnoConcert (use knob 1 for layer balance)
You can edit the keyboard touch responses to your liking and save for each bank.
93 downloads
0 comments
Updated
-
Power Piano 2
By kybdsammer in Privia PX-560
For when you want something more powerful than Power Piano 1.
298 downloads
0 comments
Submitted
-
Dry Piano
By kybdsammer in Privia PX-560
For those times when you just want a simple piano with no reverb.
132 downloads
0 comments
Submitted
-
Power Piano 1
By kybdsammer in Privia PX-560
For when you want something a little more powerful than the original Grand Piano.
219 downloads
0 comments
Submitted
-
No Sound
By kybdsammer in Privia PX-560
This may seem like a strange "tone", but I use this when I want to quickly use the PX-560 as a controller for my Pianoteq software without having to worry about the keyboard tone setting or volume level. This "tone" produces no sound at all.
58 downloads
0 comments
Updated
-
PX-560 Patch Script for Reaper DAW
By kybdsammer in Privia PX-560
You can load this .reabank file in the Reaper DAW track's "Bank/Program Select" section or through the Track FX window to select PX-560 tones.
This is my first attempt at creating a patch script file for the PX-560. I found a PX-5S patch script and used it as an example. I used the Casio PX-560 Appendix document as a reference to find the tone numbers (Bank Select MSB [5] and Program Change [4]) to use. I used "0" after every bank number and before the bank description. I have not added all the sounds to the file because it is a painstaking process since the tone numbers are not sequential and don't seem to follow any pattern (unlike the tones in the PX-5S which seem to follow a more logically grouped pattern). The .reabank file is just a simple text file, so you can modify this file to add other tones. If you are interested in doing this, hopefully you can figure it out by looking at the file and Appendix. It was a challenge to figure out how to group the tones, so I just ended up grouping them by banks (each bank can have a mix of tones) and naming them as best as I could. If you know of a better way of organizing the tones or creating a patch script, please share.
Reaper PX-560 patch script.reabank
52 downloads
-
Piano with Stereo3BndEQ
By kybdsammer in PX-S3000
I modified the GrPnoConcert again and this time added Stereo3BndEQ DSP. Each area registration uses the same sound but the Knob assignments are different to get a variety of different piano flavors. Adjust K1 and K2 to taste.
1. Modified GrPnoConcert using Stereo3BndEQ (K1 cutoff freq, K2 resonance) - turn K1 down for a more mellow sound
2. Modified GrPnoConcert using Stereo3BndEQ (K1 brilliance, K2 reverb send)
3. Modified GrPnoConcert using Stereo3BndEQ (K1 chorus send, K2 reverb send)- a little chorus can go a long way
4. Modified GrPnoConcert using Stereo3BndEQ (K1 attack time, K2 release time) - you can get some interesting sounds changing K1 and K2
54 downloads
- piano
- registration
- (and 5 more)
0 comments
Submitted
-
Casio CT-S1 Patch Script for Reaper DAW
By kybdsammer in Other Casio Products
I created a Reaper DAW patch script for the Casio CT-S1. You can upload the patch script in Reaper and then select GM sounds, CT-S1 sounds, and even a standard drum kit to use! If you use a different DAW, I think you should be able to tweak the file to a format that your DAW can read. Enjoy.
14 downloads
0 comments
Submitted