francoran Posted August 28, 2018 Share Posted August 28, 2018 Hello everybody, I hope you are going fine. It’s a couple of days I am trying to solve a problem between my PX5 and a Blofeld Desk. This is the issue: I have a Stage splitted in two parts, with Brass (zone 1) in the lower part and a Synth (zone 2) in the upper. I also prepared the zone 3 with a sound from the Blofeld that I would like to switch on/off during the song alternating with zone 2. Now, using the pedal, I can switch on/off the zone 2, but I don’t know how to switch on/off the mid out of the zone 3 without going to the stage/edit/midi setting through the display, too much stuff to press into a second! Sorry if the topic was already discussed, but I could not find anything to solve the problem. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted August 28, 2018 Share Posted August 28, 2018 A pedal or slider can't alternate two zones at once so you'll need to use two sliders instead, just set them up to turn on/off each zone. You could also make duplicate stage settings next to one another and save the zone on/off differences in each, allowing it to be a button press away. Quote Link to comment Share on other sites More sharing options...
francoran Posted August 28, 2018 Author Share Posted August 28, 2018 Thanks a lot Brad, I will try both the options. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.