Pedal and pitchbend and modulation issue in DAW with multiple MIDI channels

[sam-px5s]

Hello everyone,

I am using Px5s in a DAW. I have several tracks ( assume 4 tracks 4 channels).

 

Assume that I select Midi  channel 3 in my DAW and arm it in order to record in that track. Any pitch bend, modulation or pedal events that I use when I am playing or recording in this channel, effects the other channels. I also have done the following settings but the problem is still remained. In the sys setting,->midi -> Local Control ->off,  sys setting,->midi -> Basic CH->3

 

Thanks

[Brad Saucier]

Sounds like you have more than 1 zone active on the PX-5S.  Turn off the others, or simply use factory stage setting 0-0.  

[sam-px5s]

1 hour ago, Brad Saucier said:

Sounds like you have more than 1 zone active on the PX-5S.  Turn off the others, or simply use factory stage setting 0-0.  

Thanks Mike. No actually Just one zone is on and the other 3 are off.

[Brad Saucier]

If that's the case, your PX-5S is only sending data on 1 channel.  It's not possible for it to send data on multiple channels if only 1 zone is active.  I would check that your software tracks are configured to receive on different channels.  For instance, if all 4 of your tracks are set to receive on channel 1, all 4 tracks will record what you're playing on the PX-5S.  On the PX-5S, by default, Zone 1 is channel 1, Zone 2 is channel 2, Zone 3 is channel 3, Zone 4 is channel 4.