leeskeys Posted August 23, 2020 Share Posted August 23, 2020 I own a Pxs1000. I'm using mine as a midi controller with my iPad music apps, but also want to use some of the internal sounds Is it possible to do both? I have USB going out to send midi to my iPad apps. I also have 1/4" cables running from PXs L & R audio outputs into my mixer, then into my headphones. My problem is that the Pxs internal sounds are going only through the Pxs speakers- getting nothing out of my headphones. I cannot turn off the internal speakers. I followed the instructions in the manual - hold down Function pad and press and release C6. I hear a little kerplunk sound but this does not mute the internal speakers. I feel like I'm missing something obvious. Any ideas? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted August 23, 2020 Share Posted August 23, 2020 To disable the internal speakers, insert a plug into the headphone jack. The F7 key (speaker out) is for enabling the internal speakers after a plug has been inserted in the headphone jack. If your speakers are still sounding after plugging into the headphone jack, make sure F7 speaker out is turned off. C6 is local control. That will disable all internal sounds. Make sure local control is ON to hear sounds generated by the Casio. 1 Quote Link to comment Share on other sites More sharing options...
leeskeys Posted August 23, 2020 Author Share Posted August 23, 2020 Thanks so much Brad. That did the trick! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.