Mastersynth Posted December 9, 2023 Share Posted December 9, 2023 After recording a song and restarting the keyboard, all settings are restted (tone for each track, drumkit, effects, levels, temperament ) Is there any solution to keep them ?? Btw, is-it possible to record the mixer parameters modifications in real time? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 9, 2023 Share Posted December 9, 2023 Before beginning a new recording, preferred settings should be made at that point. These settings will be stored for playback and can't be changed without starting a new recording again. The system track stores more settings than solo tracks, like rhythm, balance, reverb, chorus, delay, tempo, registration choice, accompaniment settings, and one touch. A solo track will only store upper 1 tone and mixer settings. Unfortunately it is not possible to record mixer modifications in real time on the PX-360. Temperament is a global setting. This setting applies to everything. Turn on auto resume in the system menu to save temperament selection while the power is off. It will remember for the next time. 1 Quote Link to comment Share on other sites More sharing options...
Mastersynth Posted December 10, 2023 Author Share Posted December 10, 2023 Thank you Brad, for the auto resume tip. But is-it possible to choose different tone for each track , recording-it as a solo track?? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 10, 2023 Share Posted December 10, 2023 16 solo tracks are available. For each new recorded track, select a new tone for upper 1. It will record the new tone. 1 Quote Link to comment Share on other sites More sharing options...
Mastersynth Posted December 10, 2023 Author Share Posted December 10, 2023 What is the utility of the 3 ports in the mixer? Is-it normal that the recorder tracks are in the Port C ?? IS-it possible to switch between these 3 ports in the same recording ?? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 10, 2023 Share Posted December 10, 2023 PX-360 has a 48 part sound generator divided into three groups of parts. The three groups are labeled Port A, B and C. Ports are a way to address these different groups. 16 MIDI recorder solo tracks use port C. MIDI recorder 17th system track uses port B parts. This can't be changed. 1 Quote Link to comment Share on other sites More sharing options...
Mastersynth Posted December 11, 2023 Author Share Posted December 11, 2023 And What about the port A ?? Which tracks use it?? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted December 11, 2023 Share Posted December 11, 2023 Port A is your keyboard performance parts. It's used by upper and lower splits and layers and auto accompaniment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.