Bossbandbob Posted December 4, 2012 Share Posted December 4, 2012 What is this control supposed to do? I tried adjusting the rate after editing the organ voice to "Vintage" and did not hear any difference in the tone at all. Quote Link to comment Share on other sites More sharing options...
Bossbandbob Posted December 5, 2012 Author Share Posted December 5, 2012 Does this "Mod" setting on the drawbar organs edit menu have anything to do with the modulation button and DSP? It does nothing with DSP off. Quote Link to comment Share on other sites More sharing options...
crazydubwise Posted October 8, 2013 Share Posted October 8, 2013 I dont get you... what voice is VINTAGE? modulation button by default has vibratto, but you can asigne another DSP effect if you want.one more time: what voice is VINTAGE? Quote Link to comment Share on other sites More sharing options...
crazydubwise Posted October 8, 2013 Share Posted October 8, 2013 oh....... are you sure about VINTAGE? its not VIB (vibratto)? when you use full drawbar and rotary its hard to identify it, try with an 880088000 or something light and you will heard vib (vibratto ) fx, mate Quote Link to comment Share on other sites More sharing options...
Bossbandbob Posted October 12, 2013 Author Share Posted October 12, 2013 The Vintage setting is an adjustable parameter available to all Drawbar organ voices when you hit the EDIT button. You can choose between Vintage and Sin (Sine wave). The vintage setting emulates the crosstalk found on most Hammond tonewheel organs and sounds more authentic. Another parameter available in that menu is Mod or "Modulation," but selecting and changing it produces absolutely no change in sound even with the mod button down IIRC. Thus my question- what the heck is it there for? Quote Link to comment Share on other sites More sharing options...
Jared Beaney Posted October 14, 2013 Share Posted October 14, 2013 The modulation (and rotary) button function is set by the DSP effect.It can only control parameters from the DSP effects.Within the DSP Edit menu there is Mod Button Assign, and Off/On value.Check there to see what it's set to, or to assign it to a different DSP parameter.If no DSP is active, the button won't be doing anything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.