doug44111 Posted October 11, 2013 Share Posted October 11, 2013 How do you name/rename a phrase that you've created? Also, can you trigger a phrase from a key on the keyboard? Thanks. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted October 11, 2013 Share Posted October 11, 2013 When you write the new phrase you can rename it in a similar fashion to saving tones and stage settings. Use the arpeggiator for triggering phrases from the keys. Quote Link to comment Share on other sites More sharing options...
AronvS Posted October 18, 2013 Share Posted October 18, 2013 I was recently trying out creating arpeggiatos.I liked how easily they can be created, but I just didnt manage to do one thing: Changing the length of a note. Do I need the phraser for that function? thanks! Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted October 19, 2013 Share Posted October 19, 2013 Press and hold Arpeggio button and then hit the edit button and go to parameters. There is step size and note length. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 15, 2014 Share Posted November 15, 2014 Hey guys , listen to the baseline :https://www.youtube.com/watch?v=n5hkI5Hxliw . I have record this 6 notes baseline as a phrase , and with the loop on it sound alright but when I put this phrase in my Stage Settings there is a gap of a few measures missing before the loop is going further , like it has to rewind first ? I like to get on my left hand this baseline ( 6 notes )looping when I play one note , so I can do other different stuff with my right hand on different zones. Sorry my awful language ! Any suggestions here are very welcome. Thanks in advance! 1 Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted November 15, 2014 Share Posted November 15, 2014 You should set your end measure in the phrase record mode to the appropriate length. Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 16, 2014 Share Posted November 16, 2014 When you are in phrase record mode (the light is flashing) press the edit button. You can change the time signature here. Change it to 3/4 or 6/4 seeing as your bass line has six notes. Press exit back to the phrase record screen and change the end measure to 1 or 2 depending on whether you used 6/4 or 3/4 time. Now record your phrase again.I have a feeling you might have left it on default 4/4 time and recorded 2 measures and so you were left with 2 empty beats in the last measure. BTW in that edit screen you will also see an option to 'undo'. You can use this in overdub [OVDB] mode to undo the last overdub you made on a phrase. You can also hold the record button in overdub mode to do the same thing. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 16, 2014 Share Posted November 16, 2014 Hi,I have set my end measure on 1 and when I listen to the recorded phrase of six notes they are played within that one measure. Then I save it and select this phrase as an arpeggio within a Stage Setting. As soon has I hit my org. note my phrase of six notes is played but instead of a continious loop there are a few blanc measures before my phrase is played again. I don't know how I can solve this ? Any help is welcome. Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 16, 2014 Share Posted November 16, 2014 When you record the phrase, once the blue lights are flashing (as you pressed the phrase button twice) how do you then start the recording off? Is it by pressing the first note of your phrase or perhaps you are pressing a pedal or pressing the record button a third time thus causing a time delay? BTW if you press the SYS setting button, you can scroll down to phrase options and turn a pre-count on. This works when you press the record button to start recording. It won't do a pre-count if you just use a key to start the recording. Can you perhaps upload your phrase and I'll take a look at it if you are still having problems? Quote Link to comment Share on other sites More sharing options...
Choppin Posted November 16, 2014 Share Posted November 16, 2014 BelgianChocolates, what firmware version are you using? If I recall, an early version had a looping problem not syncing up correctly. Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted November 16, 2014 Share Posted November 16, 2014 The looping issue only affected synchronizing phrases being played by more than 1 zone. After a number of measures pass, a very very small delay in the loop point could begin to show up as out of sync tracks. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 17, 2014 Share Posted November 17, 2014 I use firmware version 1.11 . I have the impression that my looping is not syncing up correctly. The best recording so far is my six notes end measure 01 measure with 4/4 tempo on 107 . How can I upload my phrase here ? Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 17, 2014 Share Posted November 17, 2014 zip it, press the reply more options button and upload it. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 17, 2014 Share Posted November 17, 2014 Here is the phrase. Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 17, 2014 Share Posted November 17, 2014 your upload didn't work. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 18, 2014 Share Posted November 18, 2014 I tried to upload the file : WHO'S_SHE.ZPH it has only 1kb and got the message : Error You aren't permitted to upload this kind of file ? Quote Link to comment Share on other sites More sharing options...
Brad Saucier Posted November 18, 2014 Share Posted November 18, 2014 You have to zip the file. Then upload it. The file extension is the issue. Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 19, 2014 Share Posted November 19, 2014 This upload should work , it's a simple six notes phrase , end measure 01 in a 4/4 tempo 107. This few notes are played in this song: https://www.youtube.com/watch?v=n5hkI5HxliwThe phrase recorded file result is about the closest I can get but I am not realy satisfied ! Any help welcome. WHO'SHE_.zip Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 20, 2014 Share Posted November 20, 2014 Sorry, yeah, it is 4/4 time with some notes played on the half.I was able to record it successfully by keeping the time signature set to 4/4 and by setting the end measure to 1 and quantize to the first option after 'off'.You could record it in 4/8 time and speed it up as don't forget you can press the tempo button to increase the tempo on phrases or arpeggios.See what you think: Who'She DC2K.zip Quote Link to comment Share on other sites More sharing options...
BelgianChocolates Posted November 21, 2014 Share Posted November 21, 2014 Hi, thank you for your effort , I can hear that your timing is more correctly ! I will experience the 4/8 time recording later on. Quote Link to comment Share on other sites More sharing options...
dc2k Posted November 21, 2014 Share Posted November 21, 2014 You're welcome. Experiment with the quantize function too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.